This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
As it stands oxenstored will be used by default if ocaml tools are
found, the init system will also try to use oxenstored first if its
found otherwise the cxenstored will be used. Lets simplify the init
script and let users be explicit about the preference through configure.
This adds support to let you be explicit about the xenstored preference,
you can only use one of these two options:
./configure --with-xenstored=xenstored
./configure --with-xenstored=oxenstored
We continue with the old behaviour and default oxenstored will be used
but only if you have ocaml dependencies. Since the xenstored preference
is explicit now and since we require configure substitutions for it we
make use of the AX_XEN_EXPAND_CONFIG() helpers as otherwise substitution
for SBINDIR is not propagated from the top level configuration.
All this allows us to simplify the init script to use the configured
xenstore from the start. We update the sysconfig/default xencommons file
with the paths for the different options though, this can be used by
users to override the default xenstored, this follows the old behaviour
but we now just explicitly provide the full configured paths for users.
As before, changing the xenstore requires a reboot.
In order to help with documentation we update the README with some
details on configure usage refer to the wiki [0] [1] [2] for more elaborate
details.
Since we are now parsing an entry within Paths.mk.in on tools we let
the move the parsing of the file to be the tool's configure.
[0] http://wiki.xen.org/wiki/Xenstored
[1] http://wiki.xen.org/wiki/XenStore
[2] http://wiki.xen.org/wiki/XenStoreReference
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Tim Deegan <tim@xen.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Support
./configure --host=x86_64-rumpxen-netbsd
./configure --host=i386-rumpxen-netbsd
Setting --host tells configure we are cross compiling and therefore
has various automatic effects.
But in this patch we make some deliberate changes as well:
* We disable a large number of configure tests for libraries
etc. which don't exist.
* We set CONFIG_RUMP in Tools.mk.
* Hence, we automatically set XEN_OS.
(I have only tested the 32-bit build but I think the 64-bit build
should work just as well.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v3: Add comment to `fi'
v2: Mention x86_64.
Drop an erroneous whitespace change.
blktap2 will be enabled by default on Linux systems only, also give
the oportunity to disable it from configure.
Remove the gate in the Makefile that only allows enabling blktap{1,2}
on Linux, since this is now done in a more flexible way on configure.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
This was a C interface to a very early version of the XenAPI, it has not kept
up with developments to the API e.g. in xapi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
typo in tools/configure.ac cause --enable-xenapi does not works
lead to variables XML2_CONFIG, CURL_CONFIG not set
Signed-off-by: Yixun Lan (dlan) <dennis.yxun@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Debian Jessie at least contains an ovmf package that includes
/usr/share/ovmf/OVMF.fd. It's also possible that user may want to supply
his/her own ovmf binary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Add big warnings to configure, xend initscript and xm.
The big xm warning is displayed once (per boot, or per tmpreaper clean),
afterwards a single line warning is displayed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If this option is given don't bother building qemu-xen ourselves. Likely to be
handy for distros who have an existing qemu package which they want to reuse.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that we have upstream qemu people may want to avoid building this extra
code.
There is a little bit of trickery in stubdom/configure.ac to ensure that the
ioemu stubdom is only built if qemu-traditional is enabled.
libxl will return an error if a caller tries to build a domain using
qemu-xen-traditional when this support was disabled at build time. Since
qemu-xen-traditional has been historically tightly bound to the Xen releases I
don't see any value in supporting "3rd party" provision of
qemu-xen-traditional.
We also do not want/need this on ARM therefore default is on for x86 and off
otherwise.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- trivial conflicts in Tools.mk.in and tools/configure.ac.
Reran autogen.sh ]
I don't think there are any dom0's around whose kernels support only blktap1
and not something newer like blktap2 or qdisk. Certainly not that you would
want to run Xen 4.4 on.
libxl will never use blktap1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend has been deprecated for 2 releases now. Lets make it possible to not even
build it.
For now I'm leaving the default of on but I would like to change that before
the 4.4 release.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that the hotplug scripts have been fixed to remove hardcoded paths lets
try this again. From 26470:acaf29203cf9:
This is the defacto (or FHS mandated?) standard location for software
built from source, in order to avoid clashing with packaged software
which is installed under /usr/bin etc.
I think there is benefit in having Xen's install behave more like the
majority of other OSS software out there.
The major downside here is in the transition from 4.2 to 4.3 where
people who have built from source will innevitably discover breakage
because 4.3 no longer overwrites stuff in /usr like it used to so they
pickup old stale bits from /usr instead of new stuff from /usr/local.
Packages will use ./configure --prefix=/usr or whatever helper macro
their package manager gives them. I have confirmed that doing this
results in the same list of installed files as before this patch was
applied.
The hypervisor remains in /boot/ and there is no intention to move it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
tools/python and tools/pygrub are already skipped in tools/Makefile when
cross-compiling, so no point in checking for the prerequisites either.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
arm64 only has the eventfd2 system call and using the libc wrapper when
available hides this from us. eventfd() has been in libc since glibc 2.8.
This code is already Linux specific.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
getconf is not cross-compile friendly since it reports the features of the host
and not the target. There doesn't appear to be a $triplet-getconf.
AC_SYS_LARGEFILE arranges for #defines to appear in config.h however Xen's
build system expects these to be part of C{PP}FLAGS. Since I'm not confident
that everything in Xen includes config.h I instead arrange for the result of
running AC_SYS_LARGERFILE to end up in CFLAGS.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch enables the compilation of the FLASK policy as part of the
tools build if the needed prerequisites are present.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
configure checks just for ocamlc, but the tools in tools/ocaml depend
also on ocamlfind. On my workstation I have just ocamlc installed, but
no ocamlfind. As a result make will fail.
Update configure.ac to check also for OCAMLFIND, update various
Makefiles and replace hardcoded ocamlfind string with $(OCAMLFIND)
Please rerun autogen.sh after applying this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
26470:acaf29203cf9 missed a bunch of hardcoded paths, e.g. in the
initscripts. I think at this juncture it is appropriate to revert
this change and try again after some more testing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This is the defacto (or FHS mandated?) standard location for software
built from source, in order to avoid clashing with packaged software
which is installed under /usr/bin etc.
I think there is benefit in having Xen's install behave more like the
majority of other OSS software out there.
The major downside here is in the transition from 4.2 to 4.3 where
people who have built from source will innevitably discover breakage
because 4.3 no longer overwrites stuff in /usr like it used to so they
pickup old stale bits from /usr instead of new stuff from /usr/local.
Packages will use ./configure --prefix=/usr or whatever helper macro
their package manager gives them. I have confirmed that doing this
results in the same list of installed files as before this patch was
applied.
The hypervisor remains in /boot/ and there is no intention to move it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Stub domains now use autoconf to build.
This configure script can enable or disable specific domains
and also specify custom download locations for stubdom library
packages. See ./configure --help for details.
C and Caml are disabled by default. vtpm-stubdom is conditional
on the presense of cmake.
Rename vtpmmgrdom to vtpmmgr-stubdom
Also update .*ignore
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Some OSes don't come with wget by default, so ftp should be choosen
on those. Add an autoconf check to check for wget and ftp, and
replace the usage of hardcoded wget in tools.
[ Stubdom builds still use wget unconditionally. -iwj ]
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Upcoming changes may move DOCDIR from Config.mk to config/Tools.mk. To
preserve the currently used path, which ends with /xen, specify a value
for PACKAGE_TARNAME. Without this change the path would end with
/xen-hypervisor.
Please rerun autoconf after applying this.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
CentOS 5.x forked e2fs ext4 support into a different package called
e4fs, and so headers and library names changed from ext2fs to ext4fs.
Check if ext4fs/ext2fs.h and -lext4fs work, and use that instead of
ext2fs to build libfsimage. This patch assumes that if the ext4fs
library is present it should always be used instead of ext2fs.
This patch includes a rework of the ext2fs check, a new ext4fs check
and a minor modification in libfsimage to use the correct library.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This incorrectly removes the $(PYTHON) variable which is used at build
time as well as by the tools.
Remove and revisit for 4.3.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
LIB_PATH is no longer used, so the AX_DEFAULT_LIB macro is no longer
needed. Additionally lower case make variables are now used as
autoconf substitutions, which allows for more correct overrides at
build time.
I've checked the file layout in dist/install from the build made
before this change versus after with ./configure values of:
1) ./configure (no flags provided)
2) ./configure --libdir=/usr/lib/x86_64-linux-gnu (Debian style)
3) ./configure --libdir='${exec_prefix}/lib' (late variable expansion)
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc - reran autogen.sh ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch was constructed by grepping for xensource.com over the entire
repository and eyeballing which ones were sensible to update.
In addition, the xen-tools mailing list has been deprecated, so update xentop
to refer to xen-devel instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Which was introduced in 7b0dc7f3ddfe. This is because the NUMA
placement heuristic does not need FP arith anymore.
As usual when changing configure.ac, remember to rerun autoconf
after applying this change.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The previous patch (25331:dfe39bd65137) only touched the definition of the
variables used to refer to the paths to the tools but didn't remove the actual
checks.
Run autogen after applying this patch.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- added a comment about "build" vs "host" terminology and a note about
the previous attempt to the changelog, reintroduce AC_CANONICAL_HOST
which was remove by 25303:078c7d4cde1d after this patch was posted but
is required for $host_cpu ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This change only removed the variables used to supply the path to the tool but
didn't remove the checks. Will be fixed properly in a subsequent patch.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
As well as explicitly add -lm to libxl's Makefile.
This is because next patch uses floating point arithmetic, and
it is better to state it clearly that we need libmath (just in
case we find a libc that wants that to be explicitly enforced).
Notice that autoconf should be rerun after applying this change.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s/libmath/libm/ in error message ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xen-unstable fails to build in a SLES10SP4 environment since a long time
because the included version of glib is slightly older than the required
glib version. According to the glib docs version 2.12 includes base64
support, but SLES10 is shipped with glib 2.8.6:
qemu-timer-common.o: In function `init_get_clock':
/usr/src/packages/BUILD/xen-4.2.25432/non-dbg/tools/qemu-xen-dir/qemu-timer-common.c:57:
undefined reference to `clock_gettime'
qga/guest-agent-commands.o: In function `qmp_guest_file_write':
qga/guest-agent-commands.c:249: undefined reference to `g_base64_decode'
qga/guest-agent-commands.o: In function `qmp_guest_file_read':
qga/guest-agent-commands.c:224: undefined reference to `g_base64_encode'
collect2: ld returned 1 exit status
make[3]: *** [qemu-ga] Error 1
Add a version check to toplevel configure to require at least glib 2.12.
This makes sure configure can detect the condition early instead of
failing later in the middle of tools build when qemu-upstream errors
out.
Please rerun autoconf after applying this.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
We may need to #include <libutil.h>, and/or link with -lutil, to use
openpty, login_tty, and the like. Provide INCLUDE_LIBUTIL_H
(preprocessor constant, not always defined) and PTYFUNCS_LIBS
(makefile variable).
We link libxl against PTYFUNCS_LIBS (which comes from autoconf) rather
than UTIL_LIBS, and #include <libutil.h> where appropriate.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Changes since v7:
* Actually include the call to AX_CHECK_PTYFUNCS in this patch,
not the previous one, and regenerate configure accordingly.
Changes since v6:
* Put failure macro call in correct place so it might actually happen.
* Try both with -lutil and without.
* Patch now contains update for config.h.in.
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Luis R. Rodriguez
Ian Jackson
Roger Pau Monne
Andrew Cooper
Fabio Fantoni
Ian Campbell
Yixun Lan (dlan)
Jan Beulich
Daniel De Graaf
Olaf Hering
Matthew Fioravante
Matt Wilson
Dario Faggioli