Xen may not support 32-bit PV guest for a number of reasons (lack of
CONFIG_PV32, explicit pv=no-32 command line argument, or implicitly
due to CET being enabled) and advertises this to the toolstack via the
absence of xen-3.0-x86_32p ABI.
Currently, when trying to boot a 32-bit PV guest, the ABI check is too
late and the build explodes in the following manner yielding an
unhelpful error message:
xc: error: panic: xg_dom_boot.c:121: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:586:libxl__build_dom: xc_dom_boot_mem_init failed: Operation not supported
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 1:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 1:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 1:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 1:Destruction of domain failed
Move the ABI check earlier into xc_dom_parse_image() along with other
ELF-note feature checks. With this adjustment, it now looks like
this:
xc: error: panic: xg_dom_boot.c:88: xc_dom_compat_check: guest type xen-3.0-x86_32p not supported by xen kernel, sorry: Invalid kernel
libxl: error: libxl_dom.c:571:libxl__build_dom: xc_dom_parse_image failed
domainbuilder: detail: xc_dom_release: called
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 11:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 11:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 11:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 11:Destruction of domain failed
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
_hcbuf_buf1 has been there only for a pointer comparison to validate
type compatibility. The same can be achieved by not using typeof() on
the definition of what so far was _hcbuf_buf2, as the initializer has
to also be type-compatible. Drop _hcbuf_buf1 and the comaprison;
rename _hcbuf_buf2.
Since we're already using compiler extensions here, don't be shy and
also omit the middle operand of the involved ?: operator.
Bring line continuation character placement in line with that of
related macros.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Valid GFNs (having a representation in the dirty bitmap) need to be
strictly below p2m_size.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
minfo->p2m_size may have more than 31 significant bits. Change the
induction variable to unsigned long, and (largely for signed-ness
consistency) a helper variable to unsigned int. While there also avoid
open-coding min().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment, do_control_lu() will set errno to 0 before calling
lu_arch() and then check errno. The expectation is nothing in lu_arch()
will change the value unless there is an error.
However, per errno(3), a function that succeeds is allowed to change
errno. In fact, syslog() will overwrite errno if the logs are rotated
at the time it is called.
To prevent any further issue, errno is now always set before
returning NULL.
Additionally, errno is only checked when returning NULL so the client
can see the error message if there is any.
Reported-by: Michael Kurth <mku@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
lu_start() will only set errno when it returns NULL. For all the
other cases, the value is unknown.
This means that when lu_start() returns an error message, it may not
be propagated to the client.
The check that errno is a non-zero value is now dropped and instead
the value is returned when no error message is provided. This
relies on errno to always be set when ret == NULL.
Fixes: af216a99fb ("tools/xenstore: add the basic framework for doing the live update")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The maximum path length supported by Xenstored protocol is
XENSTORE_ABS_PATH_MAX (i.e 3072). This doesn't take into account the
NUL at the end of the path.
However, the code to dump the nodes will allocate a buffer
of XENSTORE_ABS_PATH. As a result it may not be possible to live-update
if there is a node name of XENSTORE_ABS_PATH.
Fix it by allocating a buffer of XENSTORE_ABS_PATH_MAX + 1 characters.
Take the opportunity to pass the max length of the buffer as a
parameter of dump_state_node_tree(). This will be clearer that the
check in the function is linked to the allocation in dump_state_nodes().
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
A platform introduced in EDK II named OvmfXen is now the one to use for
Xen instead of OvmfX64. It comes with PVH support.
Also, the Xen support in OvmfX64 is deprecated,
"deprecation notice: *dynamic* multi-VMM (QEMU vs. Xen) support in OvmfPkg"
https://edk2.groups.io/g/devel/message/75498
and has been removed upstream.
We need to also update to a newer version of OVMF as OvmfXen in the
release "edk2-stable202105" doesn't work well with Xen, so we need the
fix b37cfdd28071 ("OvmfPkg/XenPlatformPei: Relocate shared_info page
mapping").
Also, don't set anymore the number of thread for parallel build when
building the newer platform, OvmfPkg/build.sh is now doing parallel
build by default.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Current unit8_t for pirq argument in this interface is too restrictive
causing failures on modern hardware with lots of GSIs. That extends down to
XEN_DOMCTL_irq_permission ABI structure where it needs to be fixed up
as well.
Internal Xen structures appear to be fine. Existing users of the interface
in tree (libxl, ocaml and python bindings) are currently using signed int
for pirq representation which should be wide enough. Converting them to
uint32_t now is desirable to avoid accidental passing of a negative
number (probably denoting an error code) by caller as pirq, but left for
the future clean up.
Domctl interface version is needed to be bumped with this change but that
was already done by 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1
to uint64_t") in this release cycle.
Additionally, take a change and convert allow_access argument to bool.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Commit 0dbb4be739 add the inclusion of xenctrl.h from private.h and
wreck the build in an interesting way:
In file included from xen/stubdom/include/xen/domctl.h:39:0,
from xen/tools/include/xenctrl.h:36,
from private.h:4,
from minios.c:29:
xen/include/public/memory.h:407:5: error: expected specifier-qualifier-list before ‘XEN_GUEST_HANDLE_64’
XEN_GUEST_HANDLE_64(const_uint8) buffer;
^~~~~~~~~~~~~~~~~~~
This is happening because xenctrl.h defines __XEN_TOOLS__ and therefore
the public headers will start to expose the non-stable ABI. However,
xen.h has already been included by a mini-OS header before hand. So
there is a mismatch in the way the headers are included.
For now solve it in a very simple (and gross) way by including
xenctrl.h before the mini-os headers.
Fixes: 0dbb4be739 ("tools/libs/foreignmemory: Fix PAGE_SIZE redefinition error")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In particular, fill in the install/uninstall rules so this test can be
packaged to be automated sensibly.
This causes the code to be noticed by CI, which objects as follows:
test-xenstore.c: In function 'main':
test-xenstore.c:486:5: error: ignoring return value of 'asprintf', declared
with attribute warn_unused_result [-Werror=unused-result]
asprintf(&path, "%s/%u", TEST_PATH, getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Address the CI failure by checking the asprintf() return value and exiting.
Rename xs-test to test-xenstore to be consistent with other tests. Honour
APPEND_FLAGS too.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In particular, fill in the install/uninstall rules so this test can be
packaged to be automated sensibly.
Rework TARGET-y to be TARGETS, drop redundant -f's for $(RM), drop the
unconditional -O3 and use the default instead, and drop CFLAGS from the link
line but honour APPEND_LDFLAGS.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In particular, fill in the install/uninstall rules so this test can be
packaged to be automated sensibly.
Make all object files depend on the Makefile, drop redundant -f's for $(RM),
and use $(TARGET) when appropriate.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
mce-test has a test suite, but it depends on xend, needs to run in-tree, and
requires manual setup of at least one guest, and manual parameters to pass
into cases. Drop the test infrasturcture.
Move the one useful remaining item, xen-mceinj, into misc/, fixing some minor
style issues as it goes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity (which is what we are dealing with here).
Same issue applies for redefinitions of Val_none and Some_val macros which
can be already define in the OCaml system headers (e.g.
/usr/lib/ocaml/caml/mlvalues.h).
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Tested-by: Dario Faggioli <dfaggioli@suse.com>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity.
The exception is in osdep_xenforeignmemory_map() where we need the system page
size to check whether the PFN array should be allocated with mmap() or with
dynamic allocation.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with XC_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity.
The exception is in osdep_xenforeignmemory_map() where we need the system page
size to check whether the PFN array should be allocated with mmap() or with
dynamic allocation.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
If PATH_MAX is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
If PAGE_SIZE is already defined in the system (e.g. in /usr/include/limits.h
header) then gcc will trigger a redefinition error because of -Werror. This
patch replaces usage of PAGE_* macros with KDD_PAGE_* macros in order to avoid
confusion between control domain page granularity (PAGE_* definitions) and
guest domain page granularity (which is what we are dealing with here).
We chose to define the KDD_PAGE_* macros instead of using XC_PAGE_* macros
because (1) the code in kdd.c should not include any Xen headers and (2) to add
consistency for code in both kdd.c and kdd-xen.c.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Use a snapshot which includes commit
f3f568e382a5f19824b3bfc6081cde39eee661e8 ("[crypto] Add
memory output constraints for big-integer inline assembly"),
which fixes build with gcc11.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
We already do so in the native execution case, and a few descriptions (I
did notice this with SHA ones) are short enough for the output to look
slightly odd.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
918b8842a8 changed CPSR and SPSR to be stored as 64bit values.
This is fixing the print size in some tools to use 64bit type.
Fixes: 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to uint64_t")
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Tested-by: Michal Orzel <michal.orzel@arm.com>
Commit 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to
uint64_t") updated the size of the structure vcpu_guest_core_regs and
indirectly vcpu_guest_context.
On Arm, the two structures are only accessible to the tools and the
hypervisor (and therefore stable). However, they are still checked
by the scripts in tools/include/xen-foreign are not able to understand
that.
Ideally we should rework the scripts so we don't have to update
the size for non-stable structure. But I don't have limited time
to spend on the issue. So chose the simple solution and update
the size accordingly.
Note that we need to keep vcpu_guest_core_regs around because
the structure is used by vcpu_guest_context and therefore the
scripts expects the generated header to contain it.
Fixes: 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to uint64_t")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Tested-by: Michal Orzel <michal.orzel@arm.com>
Introduce a helper which decides if a given pfn type has data
in the migration stream.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Introduce a helper which decides if a given pfn in the migration
stream is backed by memory.
This highlights more clearly that type XEN_DOMCTL_PFINFO_XALLOC (a
synthetic toolstack-only type used between Xen 4.2 to 4.5 which
indicated a dirty page on the sending side for which no data will be
send in the initial iteration) does get populated in the VM.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Users of xc_get_pfn_type_batch may want to sanity check the data
returned by Xen. Add helpers for this purpose:
is_known_page_type verifies the type returned by Xen on the saving
side, or the incoming type for a page on the restoring side, is known
by the save/restore code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Using the first element of a tuple for a format specifier fails with
python3.4 as included in SLE12:
b = b"string/%x" % (i, )
TypeError: unsupported operand type(s) for %: 'bytes' and 'tuple'
It happens to work with python 2.7 and 3.6.
To support older Py3, format as strings and explicitly encode as ASCII.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The trailing member name[] in libxl__physmap_info is written as a
cstring into the stream. The current code does a sanity check if the
last byte is zero. This attempt fails with python3 because name[-1]
returns a type int. As a result the comparison with byte(\00) fails:
File "/usr/lib/xen/bin/convert-legacy-stream", line 347, in read_libxl_toolstack
raise StreamError("physmap name not NUL terminated")
StreamError: physmap name not NUL terminated
To handle both python variants, cast to bytearray().
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
When Live-Updating with some load, Xenstored may hit the assert
req->in == lu_status->in in do_lu_start().
This is happening because the request is stashed when Live-Update
begins. This happens in a different request (see call lu_begin()
when select the new binary) from the one performing Live-Update.
To avoid the problem, stash the request in lu_start().
Fixes: 65f19ed62a ("tools/xenstore: Don't assume conn->in points to the LU request")
Reported-by: Michael Kurth <mku@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: luca.fancellu@arm.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Pass 128 bytes of random seed via FDT, so that guests' CRNGs are better seeded
early at boot. This is larger than ChaCha20 key size of 32, so each byte of
CRNG state will be mixed 4 times using this seed. There does not seem to be
advantage in larger seed though.
Depending on its configuration Linux can use the seed as device randomness
or to just quickly initialize CRNG.
In either case this will provide extra randomness to further harden CRNG.
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
The code has gone through many refactors, but the first refactor was the one
which broke it by inverting the check with respect to checkpointed streams.
Fixes: 7449fb36c6 ("migration/save: pass checkpointed_stream from libxl to libxc")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
0x1c is lower than any value which will actually be observed in
p->extd.max_leaf, but higher than the logical 9 leaves worth of extended data
on Intel systems, causing x86_cpuid_copy_to_buffer() to fail with -ENOBUFS.
Correct the calculation.
The problem was first noticed in c/s 34990446ca "libxl: don't ignore the
return value from xc_cpuid_apply_policy" but introduced earlier.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
A single slash gives a float, a double slash gives an int.
bitmap = unpack_exact("Q" * ((max_id/64) + 1))
TypeError: can't multiply sequence by non-int of type 'float'
Use future division to remain compatible with python 2.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Usage of 'scsi-disk' device is deprecated and removed from QEMU,
instead we need to use 'scsi-hd' for hard drives.
See QEMU 879be3af49 (hw/scsi: remove 'scsi-disk' device)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Commit c0fe360f42 ("tools/xenstored: Extend restore code to handle
multiple input buffer") extend the read_buffered_state() to support
multiple input buffers. Unfortunately, the commit didn't go far
enough and still used sc->data (start of the buffers) for retrieving
the header. This would lead to read the wrong headers for second and
follow-up commands.
Use data in place for sc->data for the source of the memcpy()s.
Fixes: c0fe360f42 ("tools/xenstored: Extend restore code to handle multiple input buffer")
Reported-by: Raphael Ning <raphning@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Commit 3adfb50315 ("tools/xenstored: Introduce a wrapper for
conn->funcs->can_{read, write}") consolidated the check
!conn->is_ignored in two new wrappers.
This means the check in socket_can_process() is now redundant. In
fact it should have been removed in orignal commit (as it was done
for the domain helpers).
Reported-by: Raphael Ning <raphning@amazon.com
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
libxc generally uses uint32_t to represent domain IDs. This is fine as
long as addresses of such variables aren't taken, to then pass into
hypercalls: To the hypervisor, a domain ID is a 16-bit value. Introduce
a wrapper struct to deal with the issue. (On architectures with
arguments passed in registers, an intermediate variable would have been
created by the compiler already anyway, just one of the wrong type.)
The public interface change is both source and binary compatible for
the architectures we currently support.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
There's no xencall6(), so the version script also shouldn't mention it.
If such a function would ever appear, it shouldn't land in version 1.0.
No change to the generated binary, nor abi-dumper's view of the object.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Some sub-functions, XENMEM_maximum_gpfn and XENMEM_maximum_ram_page in
particular, can return values requiring more than 31 bits to represent.
Hence we cannot issue the hypercall directly when the return value of
ioctl() is used to propagate this value. This is the case for Linux
and Solaris (and hence needs changing), while the BSDs avoid using the
return value for dual purposes altogether, and MiniOS already wraps all
hypercalls in a multicall.
Suggested-by: Jürgen Groß <jgross@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Some hypercalls, memory-op in particular, can return values requiring
more than 31 bits to represent. Hence the underlying layers need to make
sure they won't truncate such values.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Some hypercalls, memory-op in particular, can return values requiring
more than 31 bits to represent. Hence the underlying layers need to make
sure they won't truncate such values. (Note that for Solaris the
function also gets renamed, to match the other OSes.)
Due to them merely propagating ioctl()'s return value, this change is
benign on Linux and Solaris. IOW there's an actual effect here only for
the BSDs and MiniOS, but even then further adjustments are needed at the
xencall<N>() level.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Jane Malalane