As part of the arm32 dom0 test, also create a simple domU using xl. To
do that, we need the toolstack installed in the dom0 rootfs. We switch
to using the kernel and rootfs built by the Yocto arm32 job.
Remove the PCI node from the host device tree: it is unused but causes a
Linux hang at boot.
Use xen-watchdog to trigger the domU creation for convience
(/etc/local.d is not handled by rootfs.)
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Copy the build output of Yocto builds to binaries/ for the arm32 target,
and export binaries/ among the jobs artifacts so that they can be reused
by other jobs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
We are going to use artifacts produced by the Yocto builds in test jobs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Use a single fairly generic string as the "all done" message to look for,
which avoids the need to patch qemu-smoke-riscv64.sh each time a new feature
is added.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
In the interest of having less jobs, we remove the x86_32 build jobs
that do release build. Debug build is very likely to be enough to find
32bit build issues.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the Let's Encrypt root certificate ISRG_Root_X1.crt is already
present, openssl seems to still check for the root certificate
DST_Root_CA_X3.crt which has expired. This prevent https connections.
Removing DST_Root_CA_X3 fix the issue.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Jessie as rearch EOL in 2020.
Even if we update the containers, we would still not be able to reach
HTTPS webside with Let's Encrypt certificates and thus would need more
change to the container.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
As Jessie is EOL, the official tag isn't supported anymore. Also, the
GPG key for the packages on the repository on the official image are
expired and it isn't possible to update or install packages.
But we can use the image from "debian/eol" tag which use repositories
from archive.debian.org and have workaround to ignore the validity
date of the keys.
There isn't a dedicated i386 tag for jessie, but we can ask docker to
pull the i386 image of the "debial/eol:jessie" tag.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
First, apt complain that it isn't the right way to add keys anymore,
but hopefully that's just a warning.
Second, we can't install clang-8:
The following packages have unmet dependencies:
clang-8 : Depends: libstdc++-8-dev but it is not installable
Depends: libgcc-8-dev but it is not installable
Depends: libobjc-8-dev but it is not installable
Recommends: llvm-8-dev but it is not going to be installed
Recommends: libomp-8-dev but it is not going to be installed
libllvm8 : Depends: libffi7 (>= 3.3~20180313) but it is not installable
E: Unable to correct problems, you have held broken packages.
clang on Debian unstable is now version 14.0.6.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
We already have a container which track the latest CentOS 7, no need
for this one as well.
Also, 7.2 have outdated root certificate which prevent connection to
website which use Let's Encrypt.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add a new test job qemu-smoke-dom0less-arm32-gcc-without-dom0 in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test dom0less domU boot without dom0 (i.e. true dom0less
configuration).
By passing "without-dom0" as a test variant, the test will clear the
dom0 prompt that we grep for as a last step and remove all the DOM0
related options in ImageBuilder configuration.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Xen supports booting gzip compressed kernels, therefore add a new test
job qemu-smoke-dom0less-arm32-gcc-gzip in debug and non-debug variant
that will execute qemu-smoke-dom0less-arm32.sh script to test booting
a domU with a gzip compressed kernel image (in our case zImage).
By passing "gzip" as a test variant, the test will call gzip command
to compress kernel image and use it in ImageBuilder configuration for
domU1. No need for a specific check to be executed from domU. Being able
to see a test message from a boot log is sufficient to mark a test as
passed.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-dom0less-arm32-gcc-staticmem in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test static memory allocation feature. The test case itself
is directly taken from dom0less arm64 testing.
Populate build jobs to compile Xen with config options necessary to
enable static memory feature. Populate test jobs passing "static-mem"
as a test variant. The test configures domU with a static memory region
(direct-mapped) and adds a check using /proc/iomem to determine the
memory region marked as "System RAM".
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we only perform a single arm32 test in our CI, checking
whether dom0 boots successfully or not. This is mostly because we do not
have any arm32 runners and we only execute a hypervisor only build.
In order not to leave the arm32 testing in such a poor state, add a
script qemu-smoke-dom0less-arm32.sh to start testing dom0less
configuration, while keeping dom0 to make the test more interesting.
The script is mostly based on the one used for dom0 arm32 testing as well
as the one used for dom0less arm64 testing. We obtain Debian Bullseye
kernel and Alpine Linux busybox-based rootfs. Depending on the test
variant, we prepare a test case contained within domU_check variable,
that will be executed as part of /init script from domU rootfs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Due to the limited x86 CI resources slowing down the whole pipeline,
switch the arm32 cross builds to be executed on arm64 which is much more
capable. For that, rename the existing debian container dockerfile
from unstable-arm32-gcc to unstable-arm64v8-arm32-gcc and use
arm64v8/debian:unstable as an image. Note, that we cannot use the same
container name as we have to keep the backwards compatibility.
Take the opportunity to remove extra empty line at the end of a file.
Modify the tag of .arm32-cross-build-tmpl to arm64 and update the build
jobs accordingly.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add check if there is a message 'Hello from C env' presents
in log file to be sure that stack is set and C part of early printk
is working.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
At the moment, the static-mem check relies on the way Xen exposes the
memory banks in device tree. As this might change, the check should be
modified to be generic and not to rely on device tree. In this case,
let's use /proc/iomem which exposes the memory ranges in %08x format
as follows:
<start_addr>-<end_addr> : <description>
This way, we can grep in /proc/iomem for an entry containing memory
region defined by the static-mem configuration with "System RAM"
description. If it exists, mark the test as passed. Also, take the
opportunity to add 0x prefix to domu_{base,size} definition rather than
adding it in front of each occurence.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
As common isn't built for RISC-V architecture now, accordingly,
common/coverage (where __gconv_* function are defined) isn't built either
but randconfig may decide to enable CONFIG_COVERAGE which will lead to
the following compilation error:
riscv64-linux-gnu-ld: prelink.o: in function `.L0 ':
arch/riscv/early_printk.c:(.text+0x18):
undefined reference to `__gcov_init'
riscv64-linux-gnu-ld: arch/riscv/early_printk.c:(.text+0x40):
undefined reference to `__gcov_exit'
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
There's no need to do ad-hoc string parsing. Use grep -q instead.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Some testcases use a cross compiler. Presently it's only arm32 and due to
previous cleanup the only thing which is now wrong is printing the compiler
version at the start of day.
Construct $cc to match what `make` will eventually choose given CROSS_COMPILE,
taking care not to modify $CC. Use $cc throughout the rest of the script.
Also correct the compiler detection logic. Plain "gcc" was wrong, and
"clang"* was a bodge highlighting the issue, but neither survive the
CROSS_COMPILE correction. Instead, construct cc_is_{gcc,clang} booleans like
we do elsewhere in the build system, by querying the --version text for gcc or
clang.
While making this change, adjust cc_ver to be calculated once at the same time
as cc_is_* are calculated.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Whether to build only Xen, or everything, is a property of container,
toolchain and/or testcase. It is not a property of XEN_TARGET_ARCH.
Capitalise HYPERVISOR_ONLY and have it set by all the
debian-unstable-gcc-arm32-* testcases at the point that arm32 get matched with
a container that can only build Xen.
To reduce the churn elsewhere, retain the RANDCONFIG implies HYPERVISOR_ONLY
property.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This is purely code motion of the cfgargs construction, into the case where it
is used.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Preserve the artefacts based on the `make` rune we actually ran, rather than
guesswork about which rune we would have run based on other settings.
Note that the ARM qemu smoke tests depend on finding binaries/xen even from
full builds. Also the Jessie-32 containers build tools but not Xen.
This means the x86_32 builds now store relevant artefacts. No change in other
configurations.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Having 3 extra hypervisor builds on the end of a full build is deeply
confusing to debug if one of them fails, because the .config file presented in
the artefacts is not the one which caused a build failure. Also, the log
tends to be truncated in the UI.
PV-only is tested as part of PV-Shim in a full build anyway, so doesn't need
repeating. HVM-only and neither appear frequently in randconfig, so drop all
the logic here to simplify things.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add test jobs in both debug and non-debug versions to run hyp-xen-version
XTF test as a dom0less domU on arm64. The purpose of this test is to
validate the functional behavior of xen_version hypercall.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce support for using XTF on Arm to perform low-level testing.
For the purpose of the CI testing, let's use the fork [1] from upstream
XTF with implemented support for arm64 (the upstream XTF only supports
x86).
Add a new script under automation/scripts to be used by the CI XTF test
jobs to perform the following tasks:
- Compiling XTF,
- Generating u-boot script using ImageBuilder,
- Running Xen with XTF as domU in pure dom0less configuration using Qemu,
- Checking test result.
The script takes the name of the XTF test to run as a first parameter.
[1] https://gitlab.com/xen-project/fusa/xtf.git (branch xtf-arm)
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Populate test jobs for Yocto based tests using the provided containers.
Due to the size restrictions, it is currently not possible to split the
build and run tasks, therefore everything is done in a single step.
Test jobs for the supported Yocto targets are generic to avoid the
necessity to add new ones after each Yocto release. The only thing
required to be changed after updating the containers is the variable
YOCTO_VERSION stored in a .yocto-test template.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add make clean support to remove the containers from the local docker
registry.
make clean-<image_name> must be called to remove an image:
make clean-yocto/kirkstone-qemuarm: remove yocto kirkstone for qemuarm
image
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Add containers suitable to run yocto kirkstone build based on ubuntu
22.04. It contains all packages required by Yocto and a checkout of the
layers required to build Xen with Yocto.
Add a generic docker image template to be used to automatically generate
docker files for different configurations:
- specific yocto version
- different targets (qemu arm, arm64 and x86)
- different host platforms (x86 or arm64)
During a call to 'make all', only the images for the host platform we
run it on in the CI is generated.
If needed, images for an other host platform can be generated manually
by calling the right make target (see make help).
Add a build script to build and run xen on qemu using Yocto.
The script supports arm32, arm64 and x86_64 and checks that dom0 is
properly booting. At this stage this does not run any guest on top of
dom0. The script is to be executed in one of the docker images to build
and run a system using a Xen source tree.
Add automation/build/yocto/*.dockerfile to gitignore as those files are
generated.
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Now, when these packages are already installed in the respective
containers, we can remove them from the test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Installation of additional packages from the test scripts when running
the tests has some drawbacks. It is slower than cloning containers and can
fail due to some network issues (apparently it often happens on x86
rackspace). This patch is adding the packages required by the tests to be
installed when building the containers.
>From qemu-alpine-x86_64.sh into debian:stretch:
- cpio,
- busybox-static.
>From qemu-smoke-*-{arm,arm64}.sh into debian:unstable-arm64v8:
- u-boot-qemu,
- u-boot-tools,
- device-tree-compiler,
- curl,
- cpio,
- busybox-static.
The follow-up patch will remove installation of these packages from the
test scripts. This is done in order not to break the CI in-between.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we define lots of test jobs in test.yaml, that make use
of the same configuration sections like variables, tags, artifacts.
Introduce templates (hidden jobs whose names start with a dot) to
reduce the overhead and simplify the file (more than 100 lines saved).
This way, the actual jobs can only specify sections that are unique
to them.
Most of the test jobs specify the same set of prerequisite jobs under
needs property with just one additional being unique to the job itself.
Introduce YAML anchors for that purpose, because when using extends, the
needs property is not being merged (the parent property overwrites the
child one).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu arm64 test scripts had been renamed to reflect their
usage, do the same for the qemu arm32 test script. Currently it only
boots dom0, so we can assume that this script will be used to perform
dom0 based testing. In the future we will be able to create corresponding
script qemu-smoke-dom0less-arm32.sh to perform dom0less based testing.
This is the last step to get rid of ambiguity with regards to naming
of Arm test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
qemu-alpine-arm64.sh script is used to perform dom0 based testing.
Rename this script to qemu-smoke-dom0-arm64.sh to reflect its usage.
Also rename the corresponding test jobs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Testing arm64 is done using the qemu-alpine-arm64.sh and
qemu-smoke-arm64.sh scripts. These scripts are executed with exactly
the same artifacts (container, rootfs, kernel, qemu) and the only
difference is that the former is used to perform dom0 based testing
and the latter - dom0less based testing.
Because the current naming is quite ambiguous, rename qemu-smoke-arm64.sh
script to qemu-smoke-dom0less-arm64.sh to reflect its usage.
qemu-alpine-arm64.sh will be renamed in the follow-up patch.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Perform the following cleanup:
- rename the device tree from virt-gicv3 to virt-gicv2 as the GIC version
used in this test is v2,
- use fdtput to perform modifications on the dtb,
- use DEBIAN_FRONTEND=noninteractive to prevent interactive prompt being
stuck waiting for answer other than "yes",
- fix the number of cpus in the device tree because currently we generate
it with a single cpu and try to run QEMU with two,
- fix the memory size we pass when generating QEMU device tree as it does
not match the memory size with what we run QEMU.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Take an example from arm64 qemu test scripts and use ImageBuilder
to generate u-boot script automatically. Calculating the addresses
manually is quite error prone and also we will be able to benefit
from using ImageBuilder when adding domUs to this test in the future.
Install and use u-boot from the debian package.
Modify the script so that binaries are loaded from u-boot via tftp.
Remove dtuart=/pl011@9000000 because stdout-path in QEMU dtb is always
set to pl011 node path.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Script automation/scripts/containerize makes it easy to build Xen within
predefined containers from gitlab container registry. This script is
currently missing the helpers to select Arm containers, so populate the
necessary entries.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, all the tests are executed on non-debug Xen builds.
To improve the coverage (e.g. we might catch some asserts), add new
test jobs using debug Xen builds.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
In the follow-up patch we will add new jobs using debug Xen builds.
Because the debug builds take more space and we might end up in
a situation when there is not enough free space (especially during
a static memory test that reserves some region in the middle), increase
RAM size for QEMU from 1GB to 2GB.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
For arm64 we perform builds using debian and alpine containers.
We are missing the randconfig build jobs for the latter, so add them.
This way for each container we have 4 fundamental build jobs:
- defconfig non-debug/debug
- randconfig non-debug/debug
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
All the build jobs exist in two flavors: debug and non-debug, where the
former sets 'debug' variable to 'y' and the latter to 'n'. This variable
is only being recognized by the toolstack, because Xen requires
enabling/disabling debug build via e.g. menuconfig/config file.
As a corollary, we end up building/testing Xen with CONFIG_DEBUG always
set to a default value ('y' for unstable and 'n' for stable branches),
regardless of the type of the build job.
Fix this behavior by setting CONFIG_DEBUG according to the 'debug' value.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
NULL scheduler is not enabled by default on non-debug Xen builds. This
causes the boot time cpupools test to fail on such build jobs. Fix the issue
by explicitly specifying the config options required to enable the NULL
scheduler.
Fixes: 36e3f41587 ("automation: Add a new job for testing boot time cpupools on arm64")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Stefano Stabellini