Select MEM_ACCESS_ALWAYS_ON on x86 to mark that MEM_ACCESS is not
configurable on x86. Avoid selecting it on ARM.
Rename HAS_MEM_ACCESS to MEM_ACCESS everywhere. Add a prompt and a
description to MEM_ACCESS in xen/common/Kconfig.
The result is that the user-visible option is MEM_ACCESS, and it is
configurable only on ARM (disabled by default). At the moment the
arch-specific mem_access code remains enabled on ARM, even with
MEM_ACCESS=y.
The purpose is to reduce code size. The option doesn't depend on EXPERT
because it would be nice to ecurity-support configurations without
MEM_ACCESS and a non-expert should be able to disable it.
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
CC: dgdegra@tycho.nsa.gov
CC: andrew.cooper3@citrix.com
CC: George.Dunlap@eu.citrix.com
CC: ian.jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: julien.grall@arm.com
CC: konrad.wilk@oracle.com
CC: sstabellini@kernel.org
CC: tim@xen.org
CC: wei.liu2@citrix.com
---
Changes in v5:
- change MEM_ACCESS_ALWAYS_ON to bool
- change default for MEM_ACCESS, default y if MEM_ACCESS_ALWAYS_ON
Changes in v4:
- remove HAS_MEM_ACCESS
- move MEM_ACCESS_ALWAYS_ON to common
- combile default and bool to def_bool
Changes in v3:
- keep HAS_MEM_ACCESS to mark that an arch can do MEM_ACCESS
- introduce MEM_ACCESS_ALWAYS_ON
- the main MEM_ACCESS option is in xen/common/Kconfig
Changes in v2:
- patch added
gdb 8.0 fixed bounds checking for 'g' packet (commit
9dc193c3be85aafa60ceff57d3b0430af607b4ce "Check for truncated
registers in process_g_packet"). This revealed that gdbsx did
not properly formatted 'g' packet - segment registers and eflags are
expected to be 32-bit fields in the response (according to
gdb/features/i386/64bit-core.xml in gdb sources). Specific error is:
Truncated register 26 in remote 'g' packet
instead of silently truncating part of register.
Additionally, it looks like segment registers of 64bit guests were never
reported correctly, because of type mismatch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Parsing/generating the escape sequences used by xenstore-client is non
trivial. So make scripting (for use in stubdom) easier by adding a raw
option.
[added man page entries, facor out expand_buffer]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add --replace-escape option to xenconsoled, which replaces ESC with
'.' in console output written to log file. This makes it slightly safer
to do tail -f on a console output of untrusted guest.
The pty output is unaffected by this option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: move variables into a narrower scope ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
In qmp_next(), the inner loop should only try to parse messages from
QMP, if there is more than one.
The handling of the receive buffer ('incomplete'), should be done at the
same scope level as read(). It doesn't need to be handle more that once
after a read.
Before this patch, when on message what handled, the inner loop would
restart by adding the 'buffer' into 'incomplete' (after reallocation).
Since 'rd' was not reset, the buffer would be strcat a second time.
After that, the stream from the QMP server would have syntax error, and
the parsor would throw errors.
This is unlikely to happen as the receive buffer is very large. And
receiving two messages in a row is unlikely. In the current case, this
could be an event and a response to a command.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also replace LIBXL__LOG_DEBUG by XTL_DEBUG, because it's shorter and
more often used in libxl.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch fix complilation error with #define DEBUG_RECEIVED of the
macro DEBUG_REPORT_RECEIVED.
error: field precision specifier ‘.*’ expects argument of type ‘int’, but argument 9 has type ‘ssize_t {aka long int}’
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Today when setting up a minimal domain configuration file for dom0 and
eventually xenstore-domain the domain type is harcoded as PV. Change
that by asking the hypervisor for the correct type.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
New field backend_type is added to vkb device in order to have QEMU and user
space backend simultaneously. Each vkb backend shall read appropriate XS entry
and service only own frontends. Id is a string field which used by the backend
to indentify the frontend.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Logically it is better to move vkb to separate file as vkb device used not only
by vfb and console.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Clang complains:
systemd_stubs.c:51:8: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
ret = Val_int(-1U);
^~~~~~~~~~~~
Since sd_notify_fd has a signature of unit -> unit, we simply change
the return value to Val_unit.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently building gdbsx with clang 3.8 gives the following errors:
xg_main.c:783:17: error: 'aligned' attribute ignored when parsing type [-Werror,-Wignored-attributes]
iop->uva = (uint64_aligned_t)((unsigned long)tobuf);
^~~~~~~~~~~~~~~~
/builds/liuw/xen/tools/debugger/gdbsx/xg/../../../../tools/include/xen/arch-x86/xen-x86_32.h:105:50: note: expanded from macro 'uint64_aligned_t'
^~~~~~~~~~
xg_main.c:816:17: error: 'aligned' attribute ignored when parsing type [-Werror,-Wignored-attributes]
iop->uva = (uint64_aligned_t)((unsigned long)frombuf);
^~~~~~~~~~~~~~~~
/builds/liuw/xen/tools/debugger/gdbsx/xg/../../../../tools/include/xen/arch-x86/xen-x86_32.h:105:50: note: expanded from macro 'uint64_aligned_t'
According to https://bugs.llvm.org/show_bug.cgi?id=11071, this issue has
been fixed in clang. But we're not going to get that in 3.8.
Explicitly disable that warning to fix the build.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To facilitate the shared Xen and toolstack code in libx86, struct msr_policy
needs to be available in the same way as struct cpuid_policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Move x86_cpuid_lookup_deep_deps() into the shared library, removing the
individual copies from the hypervisor and libxc respectively.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Both Xen and the toolstack have need of the same logic when it comes to
manipulation and checking of the CPUID and MSR values offered to guests. To
that end, libx86 is being introduced to allow Xen and the toolstack to share a
single implementation, rather than duplicating the logic.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Begin to untangle the header dependency tangle by moving definition of
struct cpuid_leaf out of x86_emulate.h into the new cpuid.h.
Additionally, plumb the header through to libxc. This is technically a
redundant include at this point, but it helps build-test the later changes,
and will be used eventually.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
gcc-8.1 complains:
| xentop.c: In function 'print':
| xentop.c:304:4: error: 'vwprintw' is deprecated [-Werror=deprecated-declarations]
| vwprintw(stdscr, (curses_str_t)fmt, args);
| ^~~~~~~~
vw_printw (note the underscore) is a non-deprecated alternative.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The build system of seabios always includes the current time and the
hostname into the resulting binary. To avoid that, it is required to
have a file '.version' in the toplevel directory of seabios-dir-remote.
And it is required to pass EXTRAVERSION= to make because its toplevel
Makefile does not take EXTRAVERSION from environment.
Adjust the code to create a '.version' file with fixed content.
Adjust the code to pass EXTRAVERSION down to make.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It appears that the test in 01d631028 for ipxe's dependency on rombios
is not good enough. Configuring with --disable-rombios doesn't disable
ipxe.
Fix it by testing the dependency after AC_ARG_ENABLE and AC_ARG_WITH
have taken effect.
At the same time, regularise options for ipxe:
--enable-ipxe enable building in-tree ipxe
--disable-ipxe disable building in-tree ipxe
--with-system-ipxe specify a path to be baked into code, disable
building in-tree ipxe, this trumps --{en,dis}able-ipxe
--without-system-ipxe error
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The paths shouldn't be set to "yes". We ask the user to set absolute
paths because Xen's build system doesn't know where to search, and the
build machine doesn't necessarily have those binaries present in the
first place.
Reported-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This option lets user specify which binary is to be used as ipxe. If
it is specified, the in-tree ipxe will not be built. This option is in
line with other --with-system-* options we provide.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Do not embed IPXE into Rombios anymore. Instead, it is loaded by the
toolstack from a file as a separate module.
Ability to let user specify an IPXE blob will come later.
No user visible change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Lift the loading code out of PVH specific branch. Take the chance to
make the debug message more useful.
Now the code needs to handle virt_base being UNSET_ADDR, which it is
for HVM guest. In case virt_base is not set, it should be treated as
zero. In case PVH and PV, virt_base is set by the respective loader
by parsing the binary.
IPXE will be loaded as a module of Rombios.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
And switch hvmloader/Makefile to use that binary. This will help later
when we change hvmloader to pick a user provided binary.
No functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
And enable MTRR. This allows to provide a sane initial MTRR state for
PVH DomUs. This will have to be expanded when pci-passthrough support
is added to PVH guests, so that MMIO regions of devices are set as
UC.
Note that initial MTRR setup is done by hvmloader for HVM guests,
that's not used by PVH guests.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In the x86 test harness and the fuzzer, and instead create a link in
the tools/include directory that can be used by all the tools.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
xencall_alloc_buffer() is used throughout Xen tools for allocating
hypercall buffers. Allocation is done at page granularity. For simple
administration each allocated set of pages contains a small header
holding the number of pages of that set. The hypercall buffer is
located directly after the 4 byte sized header, leading to a wrong
alignment for e.g. pointers.
Repair that by using a 16 byte sized header enforcing the same
alignment as malloc().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In the display protocol connector's id is named as unique-id. This patch renames
it in the libxl/xl code and uses XENDISPL_FIELD... definitions from the protocol
header.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
ENODATA is not part of the standard set of errno values, so use
ENOENT instead. This fixes the build on FreeBSD.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
clang is not capable of building the x86 emulator test harness, so
disconnect it from the clang build until it can be fixed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
SeaBIOS requires gcc and GNU ld in order to build, so allow setting
SEABIOSCC and SEABIOSLD by the caller when building in order to pass
the path to the compiler and linker that should be used when building
SeaBIOS.
Note that the LD32BIT-y variable was used by FreeBSD builds and is no
longer needed due to the ability to select the LD to use for SeaBIOS
builds, so remove it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
For libxengnttab.map, introducing a new VERS* section must be matched with a
equivalent SONAME bump.
For libxencall.map, the hunk as presented would have been ok, if Xen 4.11
hadn't been released between xencall_buffers_never_fault() and xencall_fd()
being introduced. Given the timing of the release, xencall_fd() needs moving
into a new VERS_1.2 section.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Stefano Stabellini
Marek Marczykowski-Górecki
Simon Gaiser
Anthony PERARD
Juergen Gross
Oleksandr Grytsov
Wei Liu
Andrew Cooper
Roger Pau Monné
Christopher Clark
Olaf Hering
Ian Jackson