the corresponding fields to the PCI bus manager via sysfs nodes:
/sys/bus/pci/drivers/pciback/quirks
/sys/bus/pci/drivers/pciback/permissive
xend reads the policy file every time it creates a new domain that was
assigned a PCI device.
Signed-off-by: Chris Bookholt <hap10@tycho.ncsc.mil>
- add vncviewer option to qemu-dm to spawn a vncviewer process.
- add the `vncconsole' config parameter which enables qemu-dm's vncviewer
option.
Based on a patch from: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Also add vncdisplay= option which allows setting the display number
instead of using the default display number (= domid).
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Remove the ne2000 option, the network device type can now be selected
on a per-device basis by adding a model= property to the device's entry
in the vif list.
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
migration, since old and new domains can coexist at same time
with same uuid.
Possibly this patch could be accepted if xend were to be able to
deal with localhost migration (and save/restore, which can also
occasionally race).
Signed-off-by: Keir Fraser <keir@xensource.com>
This patch adds new xm subcommands to support working with resource
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
even if the user specifies maxmem in config. This patch uses maxmem
value to set maxmem instead of memory.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
A check_uuid() in this patch checks on uuid of the
VM configuration definition. If specified uuid is
already used with the others VM, the xm create command
does not create the VM. The xm create command error occurs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
command doesn't give a command error. This problem is also
included in the xm shutdown command.
This patch checks on domain parameter. If two or more domain
parameters are given, the command error occurs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
use xml.marshal.
This patch adds new xm subcommands to support working with resource
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
labels. The new subcommands are 'xm resources', 'xm rmlabel', 'xm
getlabel' and 'xm dry-run'. In addition, the 'xm addlabel' subcommand
now uses an updated syntax to support labeling both domains and
resources. See the xm man page for details on each subcommand.
Beyond the new subcommands, this patch allows users to immediately see
when security checks will fail by pushing some basic security checking
into the beginning of 'xm create' and 'xm block-attach'. ACM security
attributes for block devices are added to XenStore in order to support
the final security enforcement, which will be performed in the kernel
and included in a separate patch.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
debugging xend as it has multiple processes, and it can be hard to
work out which one is doing what without this information.
Signed-Off-By: Horms <horms@verge.net.au>
This fixes the case where crashing/restarting a domain can cause dom0 to balloon more than
necessary.
I changed the physinfo dictionary in Python to be in KiB, rather than
MiB, to avoid accumulating ugly rounding errors. I tried to avoid
changing units anywhere else.
Signed-off-by: Charles Coffing <ccoffing@novell.com>
1. Remove has_long_option() and add arg_check_for_resource_list()
instead.
2. 'args' tells 'options' from 'params' by using gnu_getopt().
3. 'options' checks whether -l/--long option is specified.
4. If 'params' not given, print out 'No domain parameter given'
and usage.
5. If 'params' given multiple domains, print out
'No multiple domain parameters allowed' and usage.
6. Then it displays the resources as usual.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
shouldn't be needed but it appears to be necessary as the Python client
just does a wfile.read() instead of only reading the reported Content-Length.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is quite minimal
in its approach, satisfying the purposes of the paravirtualized
NetWare operating system as well as any others that expect the time
base to be provided in localtime.
Signed-off-by: Bruce Rogers <brogers@novell.com>
transport when running on Python <2.4. SSHTransport uses the new subprocess
class, and so it doesn't work on older versions.
Signed-off-by: Ewan Mellor <ewan@xensource.com>
This allows users to invoke xm against a remote server. This is much more
useful though for exercising XML-RPC transports with xm-test though since
xm-test will continue to (mostly) function if the URI is localhost.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
the previous submission in that it now uses lazy evaluation to connect
to the remote server and provides more user friendly error messages if ssh
is not available.
Signed-off-by: Anthony Liguori
This command proxies the Xend XML-RPC over stdio. This is similiar to
mercurial's hg serve --stdio command.
The most obvious use of this command is remote XML-RPC invocation over SSH.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes a few bugs in the Python SimpleXMLRPC server and enables
HTTP/1.1 by default. This allows a client to use Keep-Alive. Keep-Alive
improves performance by eliminating the overhead of connection setup and,
more importantly, avoids credential caching when executing multiple
commands over a secure connection.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Subsequent patches will follow in the coming weeks that will enable
Xen ACM to control assignment of resources (e.g., block devices and
networking) to virtual machines based on resource labels and the
active security policy.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
device model. To support USB there are two new optional config lines
that can be added to the guest config file:
usb=1
This will enable USB without defining a specific USB device.
This option is assumed and not needed if the `usbdevice' option
is given.
usbdevice='device'
This will enable USB and also enable support for the given device.
Currently, the only two devices are `mouse' (a PS/2 mouse) and
`tablet' (an absolute pointing device). The advantage of `tablet'
is that Windows guests will automatically recognize and support this
device so specifying the config line:
usbdevice='tablet'
will create a mouse that works transparently with Windows guests
under VNC. (Linux doesn't recognize the USB tablet yet so Linux
guests under VNC will still need the Summagraphics emulation.)
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
util/security.py to be either strings or ints (previously only strings
would work due to the underlying call to lowlevel.acm).
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
