... which converts binary content to hex automatically.
Update libxl to match. No API/ABI change.
This removes a latent libxl bug for cases when the buildid is longer than 4092
bytes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
... which uses XENVER_extraversion2.
In order to do this sensibly, use manual hypercall buffer handling. Not only
does this avoid an extra bounce buffer (we need to strip the xen_varbuf_t
header anyway), it's also shorter and easlier to follow.
Update libxl and the ocaml stubs to match. No API/ABI change in either.
With this change made, `xl info` can now correctly access a >15 char
extraversion:
# xl info xen_version
4.18-unstable+REALLY LONG EXTRAVERSION
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
On Arm, the SVE vector length is encoded in arch_capabilities field
of struct xen_sysctl_physinfo, make use of this field in the tools
when building for arm.
Create header arm-arch-capabilities.h to handle the arch_capabilities
field of physinfo for Arm.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
I was really hoping to avoid this, but its now too late in the 4.17 freeze and
we still don't have working fixes.
The in-Xen calculations for assistance capabilities are buggy. For the
avoidance of doubt, the original intention was to be able to control every
aspect of a APIC acceleration so we could comprehensively test Xen's support,
as it has proved to be buggy time and time again.
Even after a protracted discussion on what the new API ought to mean, attempts
to apply it to the existing logic have been unsuccessful, proving that the
API/ABI is too complicated for most people to reason about.
This reverts most of:
2ce11ce2496b2b9b3405
leaving in place the non-APIC specific changes (minimal as they are).
This takes us back to the behaviour of Xen 4.16 where APIC acceleration is
configured on a per system basis.
This work will be revisted in due course.
Fixes: 2ce11ce249 ("x86/HVM: allow per-domain usage of hardware virtualized APIC")
Fixes: 6b2b9b3405 ("x86: report Interrupt Controller Virtualization capabilities")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.
HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.
HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().
For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.
Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Remove generating _libxl_list.h and use the common _xen_list.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The first thing XEN_SYSCTL_physinfo does is zero op->u.physinfo.
Do not copy-in. It's pointless, and most callers don't initialise their
xc_physinfo_t buffer to begin with. Remove the redundant zeroing from the
remaining callers.
Spotted by Coverity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Chen <Wei.Chen@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Switch all usages of xs_daemon_open*() and xs_domain_open() to use
xs_open() instead. While at it switch xs_daemon_close() users to
xs_close().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Carve out all libxenlight related sources and move them to
tools/libs/light in order to use the generic library build environment.
The closely related sources for libxl-save-helper and the libxl test
environment are being moved, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Andrew Cooper
Luca Fancellu
Jane Malalane
Juergen Gross
Michal Orzel