Attached patch allows to pass arguments to xenconsoled
via XENCONSOLED_TRACE env. variable analogous to xenstored.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
On ia64, direct Linux boot is not supported, and 'Flash.fd' or
'guest_firmware.bin' has been used as a value of the 'kernel'
option. Cset:17016 ignores those strings and overrides them with
"/usr/lib/xen/boot/hvmloader".
Signed-off-by: Kazuhiro Suzuki <kaz@jp.fujitsu.com>
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
x86 IOMMU support added a lot of assumptions about what PCI buses look
like and where to find bridge devices. On ia64, we don't yet have
virtualization friendly IOMMUs, so for the moment, we just want to
keep "unsafe" PV PCI pass through working as well as it did in Xen
3.2. Looking at the code, it almost seems like x86 has thrown out
support for the old style driver domain. Things that don't
necessarily work on every PCI compliant architecture:
* You can't assume that just because there's a device at 01:01.0
that there's also a bridge at 01:00.0 and blow-up when you
don't find it. On HP ia64 boxes, PCI root bridges are not
necessarily exposed as a PCI device. This pretty much means
we can't call into any of the "FLR" code paths.
* BAR alignment: it's hard to have BAR alignment when your page
size is 16k. This wasn't a requirement for previous PV driver
domains, so I assume it's only for IOMMU support.
This is ugly, so I'm open to suggestions. It seems that all of these
architecture checks could be replaced by checking some "iommu_present"
variable to test whether the extra requirements are necessary.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
There is a small bug on the serial emulation code that prevents kgdb
from working correctly over the serial.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently we are trying to read the same value twice in the
serial_load function, this patch fixes that.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch exposes the persistent (aka managed) domain path in xend
configuration file. This option is already supported in XendOptions
but is not annotated in the configuration file.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
memory sizes greater than 2GB when built as a 32-bit binary.
Instead, direct HVM Linux loading approximates end of low memory via a
different method.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Latest QEMU would add a NIC device by default, unless specify the
"-nic none". So end user still get a unusable NIC even no vif in the
config file.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Xend doesn't start up on my laptop which has a PCI-CardBus bridge.
PCI-CardBus bridge device doesn't have a capability chain.
Also sanity checking of a capability chain.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
There is no need for a flush on read-only disks. It would actually
even error out and disturb the guest.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
pt_bar_reg_parse() is called for expansion rom base address register.
Currently it returns PT_BAR_FLAG_MEM if bit 0 is 0. It returns
PT_BAR_FLAG_IO if bit 0 is 1.
But bit 0 in expansion rom base address register is enable bit. If bit
0 is 1 for some reason, it returns PT_BAR_FLAG_IO. Expansion rom is
mapped to memory space. It should return PT_BAR_FLAG_MEM.
After applying this patch, it returns PT_BAR_FLAG_MEM regardless
of bit 0, when it is called for expansion rom base address register.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
I forgot to shift value read from real device. If the emulated
register offset is not aligned with 4 byte, the write emulation will
not be handled well because of corrupting register value read from
real device. The patch fixes this issue.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
libpci returns ALL F when error occurs. Currently, if libpci returns
ALL F, emulation stops. But it is possible that the field of real register
which is read by guest software is ALL F.
After applying this patch, if libpci returns ALL F, ioemu will log
warning message and continue the emulation.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
This patch fixes writing handlers for base address registers (include
expansion rom base address register) as follows.
It can be applied to both ioemu-remote and ioemu.
- Current implementation can not work fine when base address registers
are accessed via 1 byte write access and 2 byte write access. This
patch enables them.
- Currently guest software can set address which is not aligned
with resource size and page size. The patch does not allow guest
software to set unaligned address.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
- fix log messages to make analysis easier when issue occurs.
- remove verbose message.
- add comments in the source code.
- fix wrong comments in the source code.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Add --cpu to IOEMU_CONFIGURE_CROSS since otherwise qemu uses the
output of `uname -m` even for cross-building. Pass
IOEMU_CONFIGURE_CROSS to xen-setup which passes it on to
ioemu/configure.
Signed-off-by: Aron Griffis <aron@hp.com>
The new merged qemu no longer has the ability to spawn a vnc viewer
process in the bowels of the xend/qemu stack. In this patch we
provide support for this use case in a different manner - one more
akin to the mechanism used for `xm console' and `xm create -c'.
We introduce new xm options:
xm create --vncviewer [--vncviewer-autopass]
xm vncviewer [--vncviewer-autopass]
These spawn a VNC viewer, obtaining the relevant information
(including the port number and if you tell it your viewer supports it
the password to use) directly from xenstore.
Like xm console it waits in the foreground for the vnc port to become
available; the timeout case isn't handled as well as it might be - it
just causes the whole program (xm) to die with `Alarm clock' but this
is difficult to deal with given the current structure of the xs Python
lowlevel interface, which doesn't provide a timeout on the call to
wait for a xenstore watch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch backports following changes of ioemu-remote to ioemu.
It fixs warning in tools/ioemu/hw/pass-through.h and
tools/ioemu/hw/pass-through.c.
commit 30f00a0284a5ee356de6f6095e52173f2234145b
Author: Ian Jackson <ian.jackson@eu.citrix.com>
Date: Fri Jul 18 16:02:23 2008 +0100
hw/pass-through.c: pt_unregister_regions returns void
It only ever falls off the end, and its return value is not used
by its one caller.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
commit 439836900dad41f66234d2a14981aa2a90d4d346
Author: Ian Jackson <ian.jackson@eu.citrix.com>
Date: Tue Jul 22 11:55:18 2008 +0100
Add missing cast for printf of maddr
commit cf5b00e6b714eb5f900d55471d85956b09cb8fd9
Author: Ian Jackson <ian.jackson@eu.citrix.com>
Date: Thu Jul 24 13:57:10 2008 +0100
pass-through.h: Sprinkle some #ifdefs to cope with pciutils-dev
versions
Some versions of pciutils-dev contain #defines which others are
lacking.
To avoid spurious compiler warnings we add some #ifdefs. *sigh*
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Xm did not shut down domains anymore when run in xen-api mode due to a
'None' parameter being passed to xend when looking up a domain. This
fixes the problem.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This enables the usage of a bootloader, i.e., pygrub, when starting a
domain using xm in Xen-API mode.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
Currently if someone changes the date on the host, xenconsoled may
behave incorrectly due to the use of gettimeofday for the rate control
algorithm. For example I was able to hang the console connected to a
guest just setting the date forward 20 years. To solve the problem we
need to use a time source that doesn't change start point, that is
clock_gettime with CLOCK_MONOTONIC. The only bad side effect is that
it introduces a dependency to librt, but I think is well worth it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Keir Fraser