The wrong amount of indirections were being taken in
libxl_string_list_length, and its only caller was miscounting the amount
of initial non-list arguments, seemingly since the initial commit
(599c784).
This has been seen and reported in the wild (##xen):
< Trixboxer> Hi, any idea why would I get
< Trixboxer> xl: libxl_bootloader.c:42: bootloader_arg: Assertion `bl->nargs < bl->argsspace' failed.
< Trixboxer> 4.2.2-23.el6
Coverity-ID: 1054954
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We really need to check for a signed overflow of 8 bits, while the
previous check compared the sign-extended 8-bit result with the
zero-extended 16-bit one (which was wrong for all negative results).
Once at it
- also adjust the 16-bit comparison for symmetry
- improve the 8-bit multiplication (no need to zero-extend to 32-bits
the sign-extended to 16 bits original 8-bit value)
- fold both signed multiplication variants
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
... for the case of accessing MMIO.
Also streamline the ARPL emulation a little, and add tests for both
instructions (the MOVSXD one requires a few other adjustments, as we
now need to run in a mode where the emulator's mode_64bit() returns
true).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Rather than mentioning the (linked) directory, mention the files thus
making sure things get rebuild as needed when the core emulator files
change.
Also enable debug info generation unconditionally, as this is testing
stuff only anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Add big warnings to configure, xend initscript and xm.
The big xm warning is displayed once (per boot, or per tmpreaper clean),
afterwards a single line warning is displayed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
With changeset 22885 support was added for setting the MTU in the vif-bridge
script for when a vif interface was set to 'online'. The was not done for the
'add' operation. The 'add' operation was added to the script for when tap
devices were specified (c/s 21944). With the setting of the MTU for the
'online' case was there a reason for omitting the 'add'?
This patch sets the MTU for both 'online' and 'add' in the vif-bridge script.
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Fixes 32-bit build:
cc1: warnings being treated as errors
xen-mfndump.c: In function 'dump_ptes_func':
xen-mfndump.c:236: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
xen-mfndump.c: In function 'lookup_pte_func':
xen-mfndump.c:305: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Usage:
- spicevdagent=1|0 (default=0)
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab mouse
by client, no mouse lag), automatic adjustment of screen resolution,
copy and paste (text and image) between client and domU. It also
requires vdagent service installed on domU o.s. to work.
- spice_clipboard_sharing=1|0 (default=0)
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
g->id is an array and is allocated as part of g itself; it's not a
separate allocation.
Coverity-ID: 1054980
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
readlink() returns a ssize_t with a negative value on failure.
Coverity-ID: 1055566
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We need to use the foreach variant which gets the next pointer before
the loop body is executed.
Coverity-ID: 1056193
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__device_disk_from_xs_be was ignoring the backend domid, setting
it to 0 by default. Fix this by parsing the backend disk path in order
to fetch the backend domid.
This fixes the issue reported when trying to block-detach disks that
have it's backend on a driver domain.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: G.R. <firemeteor@users.sourceforge.net>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coverity identified this as:
CID 1055740 Out-of-bounds read - "In xenstat_get_node:
Out-of-bounds read from a buffer (CWE-125)"
And sure enough, if xc_domain_getinfolist returns us -1, we will
try to use it later on in the for (i = 0; i < new_domains; ..)
loop.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
A little development and debugging tool, useful when looking
for information about MFN to PFN mappings, MFN/PFN mappings
in a guest's PTEs, etc.
This is what it can do as of now:
$ /usr/sbin/xen-mfndump
Usage: xen-mfndump <command> [args]
Commands:
help show this help
dump-m2p show M2P
dump-p2m <domid> show P2M of <domid>
dump-ptes <domid> <mfn> show the PTEs in <mfn>
lookup-pte <domid> <mfn> find the PTE mapping <mfn>
memcmp-mfns <domid1> <mfn1> <domid2> <mfn2>
(str)compare content of <mfn1> & <mfn2>
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
And use it in xc_exchange_page(). This is basically because the
following change need something really similar to the set of
steps that are here abstracted in these two functions.
Despite of the change in the interface and in the signature of
some functions, this is pure code motion. No functional changes
involved.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_getdomaininfo.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_setvcpucontext.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As a wrapper to XEN_DOMCTL_get_address_size, and use it
wherever the call was being issued directly via do_domctl(),
saving quite some line of code.
Actually, the function returns the guest width in bytes,
rather than directly what XEN_DOMCTL_get_address_size provides
(which is a number of bits), since that is what it is useful
almost everywhere.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
since it errors out, asking for at least one argument, and does
not display any useful output, which is wrong (we want the list
and the info about all the existing cpupools).
IOW, the output is as follows:
~# xl cpupool-list -c
'xl cpupool-list' requires at least 1 argument.
...
While it should be as follows:
~# xl cpupool-list -c
Name CPU list
Pool-0 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Modify libxl to allow raw format file to use phy backend.
For the hotplug script part, learn from NetBSD's block hotplug script --
test the path and determine the actual type of file (block device or
regular file) then use the actual type to determine which branch to run.
With these changes, plus the current ordering of backend preference
(phy > qdisk > tap), we will use phy backend for raw format file by
default.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The switch-over logic from one page directory to the next was wrong;
it needs to be deferred until we actually reach the last page within
a given region, instead of being done when the last entry of a page
directory gets started with.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There are several enums in the IDL that are initialised to 0, while
the value 0 is not part of the enum itself. This creates problems for
language bindings generated from the IDL, such as the OCaml ones.
Added an explicit (0, "UNKNOWN") enum value where appropriate, or used
init_val to default to a sensible value.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_dominfo.shutdown_reason is valid iff (shutdown||dying). This is a bit
annoying when generating language bindings since it needs all sorts of special
casing. Just introduce an explicit value instead.
Signed-off-by: Ian Campbell <ian.cambell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Discovered by Coverity,
CIDs 1054968 1054969 1054970 1054971 1054972 1054973 10549704
This was broken by c/s 5cc436c1d2 which did a blanket change of 'int
xc_handle' -> 'xc_interface *xch'. The types got updated, but error
conditions were left as-were. (I suspect some sed was involved originally)
Also while playing around in this area, fix up some of the bracketing style to
match the Xen coding style.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
This is the version from Debian Wheezy which is what both Ian Jackson and
myself run on our workstations. As committers it is useful to minimise
regeneration noise.
This is purely a run of autogen.sh. I have not tried to build the result.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Jackson <ian.jackson@citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When building tools in debug mode (debug=y), pass --enable-debug when
configuring qemu-xen to enable some debug support (namely, to prevent
symbols from being stripped).
Signed-off-by: Matthew Daley <mattjd@gmail.com>
The SeaBIOS ROM image may validly exceed 128k in size, it's only our
interface code that so far assumed that it wouldn't. Remove that
restriction by setting the base address depending on image size.
Add a check to HVM loader so that too big images won't result in silent
guest failure anymore.
Uncomment the intended build-time size check for rombios, moving it
into a function so that it would actually compile.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ported from xapi-project/blktap a79ac2c05f9 ("XOP-289: use UTC for VHD
timestamps")]
Currently, the local timezone is factored into VHD timestamps due to the
use of mktime(). This breaks "vhd-util check" for VHDs created in one
timezone and then moved westward, which results in "primary footer
invalid: creation time in future" errors.
Signed-off-by: Andrei Lifchits <andrei.lifchits@citrix.com>
Andrei no longer works for Citrix but Germano Percossi (ex-colleague of
Andrei) contacted Andrei and confirmed that
1) this work was written on Citrix time,
2) it is OK to have Andrei's SoB.
Remove unused variable "tm".
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There are some disk formats commonly supported by both qdisk and blktap.
As qdisk is better supported and blktap is unmaintained, we choose qdisk
over blktap whenever possible.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A file descriptor leak was detected after creating multiple domUs with
pass-through PCI devices. This patch fixes the issue.
Signed-off-by: Xi Xiong <xixiong@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
Newer PCI standards (e.g., PCI-X 2.0 and PCIe) introduce extended
configuration space which is larger than 256 bytes. This patch uses
stat() to determine the amount of space used to correctly save all of
the PCI configuration space. Resets handled by the xen-pciback driver
don't have this problem, as that code correctly handles saving
extended configuration space.
Signed-off-by: Steven Noonan <snoonan@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
Fixes regression indirectly introduced by c/s 4d23036e70
That changeset added some smbios tables which were option based on the
toolstack providing appropriate xenstore keys. The do_struct() macro would
unconditionally increment nr_structs, even if a table was not actually
written.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Matthew Daley
Jan Beulich
Ian Campbell
Charles Arnold
George Dunlap
Fabio Fantoni
Roger Pau Monne
Konrad Rzeszutek Wilk
Dario Faggioli
Wei Liu
Rob Hoes
Andrew Cooper
Olaf Hering
Xi Xiong
Steven Noonan