It is number of vmexits and a moderate quantity of qemu logging which can
safely be avoided when not specifically debugging a PCI hotplug issue.
As mk_dsdt is a build system tool, pass 'debug' as a command line parameter
rather than "hardcoding" it via the compilation of mk_dsdt itself.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When building hvmloader for Xen tools the ipxe objects are also linked
into the binary. Unfortunately the linker will place them in the order
found in the archive. Since this order is random the resulting hvmloader
binary differs when it was built from identical sources but on different
build hosts. To help with creating a reproducible binary the elements in
blib.a must simply be sorted before passing them to $(AR).
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Hvmloader issues XENMEM_get_vnumainfo hypercall and stores the
information retrieved in scratch space for later use.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Newer iasl complains about this being violated.
Also convert a ShiftLeft(<constant>, <constant>) to a plain constant.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Newer iasl validly complains that such routines would otherwise need to
be marked Serialized (in the SSDT case it can't know that explicit
serialization is being enforced), which is undesirable. Use Local<N>
instead.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If you add enough PCI devices then all mmio may not fit below 4G
which may not be the layout the user wanted. This allows you to
increase the below 4G address space that PCI devices can use and
therefore in more cases not have any mmio that is above 4G.
There are real PCI cards that do not support mmio over 4G, so if you
want to emulate them precisely, you may also need to increase the
space below 4G for them. There are drivers for these cards that also
do not work if they have their mmio space mapped above 4G.
This allows growing the MMIO hole to the size needed.
This may help with using pci passthru and HVM.
In the tools this is named mmio_hole_memkb.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- fixed build error in xl_cmdimpl.c with s/%PRIu64/%ld/.
Reworded title ]
Hvmloader uses the xenstore ring and then tries to reset it back
to its initial state before booting the guest. Occasionally xenstored
will read the ring while it is being zeroed and conclude it has
been corrupted. This prevents PV drivers from loading in the guest.
This patch updates the xenstore ring protocol definition, enabling
a server to advertise additional features to the guest. One such feature
is defined: the ability to cleanly reset the ring including the
higher-level protocol, like an enhanced RESET_WATCHES for rings.
This patch implements the ring reconnection features in oxenstored
and hvmloader, fixing the bug.
This patch also defines an 'invalid' xenstore packet type and uses this
to poison the ring over a reconnect. This will make diagnosing this
bug much easier in future.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
subtree-force-update will update all subtrees according to the current TAG specified
in Config.mk.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Make the targets depend on the "-find" targets, so that if the
subtrees are cloned if they haven't been cloned already.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have four different external trees, and four different naming
conventions for specifying the URL, where they live, and what revision
to check out.
Normalize config options on the following bases:
- QEMU_UPSTREAM
- QEMU_TRADITIONAL
- SEABIOS_UPSTREAM
- OVMF_UPSTREAM
The following suffixes for all trees:
- _URL : A remote repository to clone from
- _REVISION : The revision to check out
And the following suffixes for the qemu trees:
- _INTREE : The location of an inlined tree (for tarball releases)
- _LOC : Where to actually look (either a directory or a URL)
The following parameters are still supported for backwards
compatibility:
- CONFIG_QEMU (=> QEMU_TRADITIONAL_LOC)
- QEMU_REMOTE (=> QEMU_TRADITIONAL_URL)
- QEMU_TAG (=> QEMU_TRADITIONAL_REVISION)
- SEABIOS_UPSTREAM_TAG (=> SEABIOS_UPSTREAM_REVISION)
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The VM generation ID support in libxc/libxl was based on a draft
specification which subsequently changed considerably. Remove much of
the code in anticipation of introducing something simpler that
conforms to the current specification from Microsoft.
Switch to using a HVM param (HVM_PARAM_VM_GENERATION_ID_ADDR) instead
of the hvmloader/generation-id-address XenStore key. This simplifies
save/restore since it only needs to transfer the value of this param.
There are no changes to the migration stream format or the public
libxl API.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- updated xc_nomigrate.c for interface change ]
WinXP and Win2K3, while having no problem with the QWordMemory resource
(there was another one there before), don't like operations on 64-bit
fields. Split the fields d0688669 ("hvmloader: also cover PCI MMIO
ranges above 4G with UC MTRR ranges") added to 32-bit ones, handling
carry over explicitly.
Sadly the constructs needed to create the sub-fields - nominally
CreateDWordField(PRT0, \_SB.PCI0._CRS._Y02._MIN, MINL)
CreateDWordField(PRT0, Add(\_SB.PCI0._CRS._Y02._MIN, 4), MINH)
- can't be used: The former gets warned upon by newer iasl, i.e. would
need to be replaced by the latter just with the addend changed to 0,
and the latter doesn't translate properly with recent iasl). Hence,
short of having an ASL/iasl expert at hand, we need to work around the
shortcomings of various iasl versions. See the code comment.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
While most of them support what we have now, Wheezy's dislikes the
empty range. Put a fake one in place - it's getting overwritten upon
evaluation of _CRS anyway.
The range could be grown (downwards) if necessary; the way it is now
it is
- the highest possible one below the 36-bit boundary (with 36 bits
being the lowest common denominator for all supported systems),
- the smallest possible one that said iasl accepts.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Rather than leaving the range from PCI_MEM_END (0xfc000000) to 4G
uncovered, we should include this in the UC range created for the (low)
PCI range. Besides being more correct, this also has the advantage that
with the way pci_setup() currently works the range will always be
mappable with a single variable range MTRR (rather than from 2 to 5
depending on how much the lower boundary gets shifted down to
accommodate all devices).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When adding support for BAR assignments to addresses above 4G, the MTRR
side of things was left out.
Additionally the MMIO ranges in the DSDT's \_SB.PCI0._CRS were having
memory types not matching the ones put into MTRRs: The legacy VGA range
is supposed to be WC, and the other ones should be UC.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This should help to reduce a CPU hotplug race window where a cpu hotplug
event while not be seen by the OS.
When hotplugging more than one vcpu, some of those vcpus might not be
seen as plugged by the guest.
This is what is currently happenning:
1. hw adds cpu, sets GPE.2 bit and sends SCI
2. OSPM gets SCI, reads GPE00.sts and masks GPE.2 bit in GPE00.en
3. OSPM executes _L02 (level-triggered event associate to cpu hotplug)
4. hw adds second cpu and sets GPE.2 bit but SCI is not asserted
since GPE00.en masks event
5. OSPM resets GPE.2 bit in GPE00.sts and umasks it in GPE00.en
as result event for step 4 is lost because step 5 clears it and OS
will not see added second cpu.
ACPI 50 spec: 5.6.4 General-Purpose Event Handling
defines GPE event handling as following:
1. Disables the interrupt source (GPEx_BLK EN bit).
2. If an edge event, clears the status bit.
3. Performs one of the following:
* Dispatches to an ACPI-aware device driver.
* Queues the matching control method for execution.
* Manages a wake event using device _PRW objects.
4. If a level event, clears the status bit.
5. Enables the interrupt source.
So, by using edge-triggered General-Purpose Event instead of a
level-triggered GPE, OSPM is less likely to clear the status bit of the
addition of the second CPU. On step 5, QEMU will resend an interrupt if
the status bit is set.
This description apply also for PCI hotplug since the same step are
followed by QEMU, so we also change the GPE event type for PCI hotplug.
This does not apply to qemu-xen-traditional because it does not resend
an interrupt if necessary as a result of step 5.
Patch and description inspired by SeaBIOS's commit:
Replace level gpe event with edge gpe event for hot-plug handlers
9c6635bd48d39a1d17d0a73df6e577ef6bd0037c
from Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
OVMF info contains E820 map allocated by hvmloader. This info is passed
to OVMF to help it do proper initialization.
Currently only E820 is necessary, but we reserve spaces for other tables
in ovmf_info for later usage.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Load OVMF from (100000000ULL - sizeof(ovmf)) to 0xFFFFFFFF, with proper
rounding down.
Tested with OVMF release build (1 MB) and debug build (2 MB), both
worked fine.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Debian Jessie at least contains an ovmf package that includes
/usr/share/ovmf/OVMF.fd. It's also possible that user may want to supply
his/her own ovmf binary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
for consistency with other foo-dir e.g. qemu, seabios.
Remove obsolete ovmf-find target.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
This allow building of XEN from source on a system without internet
access using either the environment or .config
Do the same with XEN_EXTFILES_URL, QEMU_REMOTE, IPXE_GIT_URL, and
IPXE_TARBALL_URL as QEMU_UPSTREAM_URL, SEABIOS_UPSTREAM_URL, etc.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coverity complains about the use of strncpy() to completely fill the anchor
strings, resulting in an unterminated string.
Although the strncpy result is correct, the anchor strings are not strings in
the C sense, and use of memcpy is the prevaling style elsewhere in hvmloader
anyway.
While tidying up the style in this function, also remove some trailing
whitespace and gratuitous cast.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The SeaBIOS ROM image may validly exceed 128k in size, it's only our
interface code that so far assumed that it wouldn't. Remove that
restriction by setting the base address depending on image size.
Add a check to HVM loader so that too big images won't result in silent
guest failure anymore.
Uncomment the intended build-time size check for rombios, moving it
into a function so that it would actually compile.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Fixes regression indirectly introduced by c/s 4d23036e70
That changeset added some smbios tables which were option based on the
toolstack providing appropriate xenstore keys. The do_struct() macro would
unconditionally increment nr_structs, even if a table was not actually
written.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Default builds of Qemu have the Bochs debug port logging #ifdef'd out, so
remove all the completely wasted VMExits
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
The return value from await_ide() is always ignored, and most calls to
await_ide() immediately reread the status register.
Therefore, making await_ide() return the last value of the status register
removes a further two traps on the int 0x13 path.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
So taking two traps when one will do is pointless. This removes 1 of 13
VMExits on the int 0x13 hotpath.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Don Slutz
Andrew Cooper
Wen Congyang
Olaf Hering
Jan Beulich
Wei Liu
David Scott
George Dunlap
David Vrabel
Roger Pau Monne
Ian Campbell
Anthony PERARD
Fabio Fantoni