Add pvcalls support to libxl and xl. Create the appropriate pvcalls
entries in xenstore.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In my automated SLE_11 builds I often see failures like that:
[ 74s] wrappers.c:5:25: error: x86-emulate.h: No such file or directory
[ 74s] make[6]: *** [wrappers.o] Error 1
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Move line to where it belongs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This will lead to writing a wrong module command line physical memory
address if no command line is actually provided.
This hasn't caused problems so far because hvmloader is the only
consumer of the modules command line, and it's unconditionally set
in that case.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The start_info size calculated in bootlate_hvm is wrong. It should use
HVMLOADER_MODULE_MAX_COUNT instead of dom->num_modules and it doesn't
take into account the size of the modules command line.
This is not a problem so far because the actually used amount of
memory doesn't cross a page boundary, and so no page-fault is
triggered.
Instead of fixing the size calculation done in bootlate_hvm just map
the amount of memory allocated in alloc_magic_pages_hvm.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
.. by -drive if=none,.. -device scsi-disk,...
The use of if=scsi in QEMU is deprecated and has been removed in 2.12 by
1454509726 scsi: Remove automatic creation of SCSI controllers with -drive if=scsi
It used to create a SCSI controller, now we have to explicitly create
it in libxl. This is done ahead of disks creation in order to try to
keep the controller on the PCI slot as it used to be.
The chosen "id" for drive is the same that QEMU used to create.
This patch also take the opportunity to remove the comments in
qemu_disk_scsi_drive_string() which had a typo and is now out of date.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
HVM guest should be created with (XEN_X86_EMU_ALL &
~XEN_X86_EMU_VPCI). This is not an issue for xl/libxl because it
already sets the correct emulation flags and doesn't pass a NULL
xc_domain_configuration_t to xc_domain_create.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 448c03b3cb ("tools/xenstore: try to get minimum thread
stack size for watch thread") added a dependency to libdl to
libxenstore. Unfortunately the way it was added requires now all
users of libxenstore to specify "-ldl" when linking. This can be
avoided by linking libxenstore.so specifying "-ldl" as a trailing
option. So use APPEND_LDFLAGS instead of LDFLAGS for adding the
"-ldl" option when linking libxenstore.so.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Tested-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Some functions in vpci.c (vpci_remove_device and vpci_add_handlers)
are not used by the user-space test harness, so guard them with
__XEN__ in order to avoid exposing them to the user-space test
harness.
Requested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduce a set of handlers that trap accesses to the PCI BARs and the
command register, in order to snoop BAR sizing and BAR relocation.
The command handler is used to detect changes to bit 2 (response to
memory space accesses), and maps/unmaps the BARs of the device into
the guest p2m. A rangeset is used in order to figure out which memory
to map/unmap. This makes it easier to keep track of the possible
overlaps with other BARs, and will also simplify MSI-X support, where
certain regions of a BAR might be used for the MSI-X table or PBA.
The BAR register handlers are used to detect attempts by the guest to
size or relocate the BARs.
Note that the long running BAR mapping and unmapping operations are
deferred to be performed by hvm_io_pending, so that they can be safely
preempted.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[IO]
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
This functionality is going to reside in vpci.c (and the corresponding
vpci.h header), and should be arch-agnostic. The handlers introduced
in this patch setup the basic functionality required in order to trap
accesses to the PCI config space, and allow decoding the address and
finding the corresponding handler that should handle the access
(although no handlers are implemented).
Note that the traps to the PCI IO ports registers (0xcf8/0xcfc) are
setup inside of a x86 HVM file, since that's not shared with other
arches.
A new XEN_X86_EMU_VPCI x86 domain flag is added in order to signal Xen
whether a domain should use the newly introduced vPCI handlers, this
is only enabled for PVH Dom0 at the moment.
A very simple user-space test is also provided, so that the basic
functionality of the vPCI traps can be asserted. This has been proven
quite helpful during development, since the logic to handle partial
accesses or accesses that expand across multiple registers is not
trivial.
The handlers for the registers are added to a linked list that's keep
sorted at all times. Both the read and write handlers support accesses
that expand across multiple emulated registers and contain gaps not
emulated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[IO parts]
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
[ARM]
Acked-by: Julien Grall <julien.grall@arm.com>
[Tools]
Acked-by: Wei Liu <wei.liu2@citrix.com>
These don't allow LOCK, but still are read-modify-write operations, so
are better handled that way too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In order to correctly emulate read-modify-write insns, especially
LOCKed ones, we should not issue reads and writes separately. Use a
new hook to combine both, and don't uniformly read the memory
destination anymore. Instead, DstMem opcodes without Mov now need to
have done so in their respective case blocks.
Also strip bogus _ prefixes from macro parameters when this only affects
lines which are being changed anyway.
In the test harness, besides some re-ordering to facilitate running a
few tests twice (one without and a second time with the .rmw hook in
place), tighten a few EFLAGS checks and add a test for NOT with memory
operand (in particular to verify EFLAGS don't get altered there).
For now make use of the hook optional for callers; eventually we may
want to consider making this mandatory.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use hooks, just like done for other special purpose registers.
This includes moving XCR0 checks from hvmemul_get_fpu() to the emulator
itself as well as adding support for XGETBV emulation.
For now fuzzer reads will obtain the real values (minus the fuzzing of
the hook pointer itself).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com> [tracing parts]
xenbaked.c -> dump_stats(), run_time = time(&end_time) - time(&start_time),
time() returns the value in seconds. If one cancels xenmon.py immediately
after started, run_time can be zero, and then xenbaked will hit divide by
zero fault.
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Removes special purpose access to Credit1 vCPU
migration delay parameter.
This fixes a build breakage, occuring when Xen
is configured with SCHED_CREDIT=n.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Now that it is possible to get and set the migration
delay via the SCHEDOP sysctl, use that in xenpm, instead
of the special purpose libxc interface (which will be
removed in a following commit).
The sysctl, however, requires a cpupool-id argument,
for knowing on which scheduler it is operating on. In
this case, since we don't want to alter xenpm's command
line interface, we always use '0', which means xenpm
will always act on the default cpupool ('Pool-0').
>From this commit on, `xenpm {set,get}-vcpu-migration-delay'
commands work again. But that is only for the sake of
backward compatibility, and their use is deprecated, in
favour of 'xl sched-credit -s [-c <poolid>] -m <delay>'.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Make it possible to get and set a (Credit1) scheduler's
vCPU migration delay via the SCHEDOP sysctl, from both
libxl and xl (no change needed in libxc).
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Libraries have no buisness using stdout directly, and these have no real
value. Dropping them removes the following output when building a PVH guest:
[root@fusebot ~]# xl create shim.cfg
Parsing config from shim.cfg
S3 disabled
S4 disabled
CONV disabled
[root@fusebot ~]#
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This allows the section contents to be disassembled without going
through any extra hoops, simplifying the analysis of problems in test
and/or emulation code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Yes, recent AMD CPUs don't support them anymore, but I think we should
nevertheless cope.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit b435014517.
Due to the implementation of cc-option, the check is always true,
which means build for gcc that doesn't have -Og support is broken.
This patch can be reapplied once we have fixed cc-option.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Since version 2.10, QEMU will lock the disk images so a second QEMU
instance will not try to open it. This would prevent live migration from
working correctly. A new parameter as been added to the QMP command
"xen-save-devices-state" in QEMU version 2.11 which allow to unlock the
disk image for a live migration, but also keep it locked for a snapshot.
QEMU commit: 5d6c599fe1d69a1bf8c5c4d3c58be2b31cd625ad
"migration, xen: Fix block image lock issue on live migration"
The extra "live" parameter can only be use if QEMU knows about it, so
only add it if qemu is recent enough.
The struct libxl__domain_suspend_state as now knowledge if the suspend
is part of a live migration.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On connection to QEMU via QMP, the version of QEMU is provided, store it
for later use.
Add a function qmp_qemu_check_version that can be used to check if QEMU
is new enough for certain fonctionnality. This will be used in a moment.
As it's a static function, it is commented out until first use, which is
in the next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XSA-256 forces the local APIC to always be enabled for PVH guests, so
ignore any apic option for PVH guests. Update the documentation
accordingly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With gcc optimization enabled by:
tools: detect appropriate debug optimization level
b435014517
-Wformat-truncation throws warnings
gcc version 7.3.0
xenalyze.c: In function 'find_symbol':
xenalyze.c:382:36: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf(name, 128, "(%s +%llx)",
^
xenalyze.c:382:5: note: 'snprintf' output between 6 and 144 bytes into a destination of size 128
snprintf(name, 128, "(%s +%llx)",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lastname, offset);
~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Xen built with ocaml 4.06 gives errors such as
Error: This expression has type bytes but an expression was
expected of type string
as Byte and safe-strings which were introduced in 4.02 are the
default in 4.06.
This patch which is partly by Richard W.M. Jones of Red Hat
from https://bugzilla.redhat.com/show_bug.cgi?id=1526703
fixes these issues.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Christian Lindig<christian.lindig@citrix.com>
When building debug use -Og as the optimization level if its available,
otherwise retain the use of -O0. -Og has been added by GCC to enable all
optimizations that to not affect debugging while retaining full
debugability.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently with the native tool chain on Debian Jessie ./test_x86_emulator
yields:
Testing AVX2 256bit single native execution...okay
Testing AVX2 256bit single 64-bit code sequence...[line 933] failed!
The bug is that libc's memcpy() in read() uses %xmm8 (specifically, in
__memcpy_sse2_unaligned()), which corrupts %ymm8 behind the back of the AVX2
test code.
Introduce wrappers (and machinery to forward calls to those wrappers)
saving/restoring FPU state around certain library calls.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-and-tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce common helpers for saving and restoring FPU state. During
emul_test_init(), calculate whether to use xsave or fxsave, and tweak the
existing mxcsr_mask logic to avoid using another large static buffer.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit 448c03b3cb ("tools/xenstore: try to get minimum thread
stack size for watch thread") added a dependency to libdl to
libxenstore.
Add the needed flags to LDLIBS_libxenstore and the pkg-config file of
libxenstore.
Fixes: 448c03b3cb
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It is only xenstored which uses libsystemd. Avoid having libxenstore pull
libsystemd into the address space of all of its users.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When creating a GICv3 devicetree node, we currently insert the
redistributor-stride and #redistributor-regions properties, with fixed
values which are actually the architected ones. Since those properties are
optional, and in the case of the stride only needed to cover for broken
platforms, we don't need to describe them if they don't differ from the
default values. This will always be the case for our constructed
DomU memory map.
So we drop those properties altogether and provide a clean and architected
GICv3 DT node for DomUs.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I.e. those not being equivalents of SSEn ones, but with the exception
of the various gather operations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When creating a pthread in xs_watch() try to get the minimal needed
size of the thread from glibc instead of using a constant. This avoids
problems when the library is used in programs with large per-thread
memory.
Use dlsym() to get the pointer to __pthread_get_minstack() in order to
avoid linkage problems and fall back to the current constant size if
not found.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
The maximum size for the input size was set to INPUT_SIZE, which is actually
the size of the data array inside the fuzz_corpus structure and so was not
abling user (or AFL) to fill in the whole structure. Changing to
sizeof(struct fuzz_corpus) correct this problem.
Signed-off-by: Paul Semel <semelpaul@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Curl and xml2 are not required anymore since 185bb58be3 ("tools: drop
libxen") removed their only user.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.sh ]
Applications like libvirt may not populate a device devid field,
delegating that to libxl. If needed, the application can later
retrieve the libxl-produced devid. Indeed most devices are handled
this way in libvirt, channel devices included.
This works well when only one channel device is defined, but more
than one results in
qemu-system-i386: -chardev socket,id=libxl-channel-1,\
path=/tmp/test-org.qemu.guest_agent.00,server,nowait:
Duplicate ID 'libxl-channel-1' for chardev
Besides the odd '-1' value in the id, multiple channels have the same
id, causing qemu to fail. A simple fix is to set an uninitialized
devid (-1) to the dev_num passed to libxl__init_console_from_channel().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Backend domain may be independently destroyed - there is no
synchronization of libxl structures (including /libxl tree) elsewhere.
Backend might also remove the device info from its backend xenstore
subtree on its own.
We have various cases (not comprehensive list):
- both frontend and backend operational: after setting
be/state=XenbusStateClosing backend wait for frontend confirmation
and respond with be/state=XenbusStateClosed; then libxl in dom0
remove frontend entries and libxl in backend domain (which may be the
same) remove backend entries
- unresponsive backend/frontend: after a timeout, force=1 is used to remove
frontend entries, instead of just setting
be/state=XenbusStateClosing; then wait for be/state=XenbusStateClosed.
If that timeout too, remove both frontend and backend entries
- backend gone, with this patch: no place for setting/waiting on
be/state - go directly to removing frontend entries, without waiting
for be/state=XenbusStateClosed (this is the difference vs force=1)
Without this patch the end result is similar, both frontend and backend
entries are removed, but in case of backend gone:
- libxl waits for be/state=XenbusStateClosed (and obviously timeout)
- return value from the function signal an error, which for example
confuse libvirt - it thinks the device remove failed, so is still
there
If such situation is detected, do not fail the removal, but finish the
cleanup of the frontend side and return 0.
This is just workaround, the real fix should watch when the device
backend is removed (including backend domain destruction) and remove
frontend at that time. And report such event to higher layer code, so
for example libvirt could synchronize its state.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I have no idea what *.1 is meant to cover. Instead also exclude
preprocessed and non-source assembly files.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
I have no idea what *.d1 is supposed to refer to - we only have .*.d
and .*.d2 files (note also the leading dot). Also switch to passing
-name instead of -path to find - that's a requirement for .*.d et al to
work, but would probably have been better from the beginning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Commit 119ee4d773 ("tools/libxc: Tolerate specific zero-content records
in migration v2 streams") meant tolerate those, but failed to set rc
accordingly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
At the moment, Xen provides virtual PSCI interface compliant with 0.1
and 0.2. Since them, the specification has been updated and the latest
version is 1.1 (see ARM DEN 0022D).
>From an implementation point of view, only PSCI_FEATURES is mandatory.
The rest is optional and can be left unimplemented for now.
At the same time, the compatible for PSCI node have been updated to
expose "arm,psci-1.0".
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: mirela.simonovic@aggios.com
Stefano Stabellini
Olaf Hering
Roger Pau Monne
Anthony PERARD
Juergen Gross
Jan Beulich
Joe Jin
Dario Faggioli
Andrew Cooper
Wei Liu
John Thomson
Doug Goldstein
Michael Young
Andre Przywara
Paul Semel
Jim Fehlig
Marek Marczykowski-Górecki
Julien Grall