With hyperlaunch, a domU can start before its console ring is connected
by xenconsoled. With nothing emptying the ring, it can quickly fill
during boot. In domU_write_console(), __write_console() returns 0 when
the ring is full. This loops spins until xenconsoled starts emptying
the ring:
while (len) {
ssize_t sent = __write_console(cons, data, len);
if (sent < 0)
return sent;
data += sent;
len -= sent;
if (unlikely(len))
HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
}
The goal of this patch is to add a way for the frontend to know when a
console is connected. This patch adds a new flag to the end of the
console ring structure. It is used for the backend to indicate that it
has connected and started servicing the page.
The two values are
XENCONSOLE_DISCONNECTED 1
XENCONSOLE_CONNECTED 0
XENCONSOLE_DISCONNECTED indicates to the guest that ring is
disconnected, so it will not be serviced. The guest can avoid writing
into it in that case. A domU can use console hypercalls and only
transition to the ring when it is connected and won't fill and block.
Once the backend (xenconsoled) maps and starts servicing the
console, the flag will be set to XENCONSOLE_CONNECTED (0) to indicate
the backend state to the frontend.
The connected value as 0 will be match the default of a zero-ed console
page. Hyperlaunch can set the flag to XENCONSOLE_DISCONNECTED and let
xenconsoled set to XENCONSOLE_CONNECTED.
Old domU hvc_xen drivers won't check the flag.
New domU hvc_xen running on a new xen/xenconsoled will work properly.
New domU hvc_xen on old xen/xenconsoled should only see a 0 for the flag
and behave as if connected.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Dom0 may be accessed via telnet, meaning the default escape character
(which is the same as telnet's) cannot be directly used to exit the
console. It would be helpful to make the escape character customizable
in such use cases.
Add --escape argument to console tool for this purpose.
Add argument to getopt options, parse and validate the escape character
and pass value to console_loop.
If --escape is not specified, it falls back to the existing behavior
using DEFAULT_ESCAPE_SEQUENCE.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Hongda Deng <hongda.deng@arm.com>
It has 2 avoidable occurences
* Check whether a domain is valid, which can be done faster with
xc_domain_getinfo_single().
* Domain discovery, which can be done in a race-free way with the sysctl
interface through xc_domain_getinfolist().
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
In order to better reflect the contents of the header and to make it
more appropriate to use it for different runtime environments like
programs, libraries, and firmware, rename the libs.h include file to
common-macros.h. Additionally add a comment pointing out the need to be
self-contained.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> # tools/python/xen/lowlevel/xc/xc.c
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
"int" is not a suitable type to hold time()'s return value.
Coverity ID: 1509376
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Sources of both xenconsoled and xenconsole are already separated into
different directory and don't share anything in common. Having two
different Makefile means it's easier to deal with *FLAGS.
Some common changes:
Rename $(BIN) to $(TARGETS), this will be useful later.
Stop removing *.so *.rpm *.a as they aren't created here.
Use $(OBJS-y) to list objects.
Update $(CFLAGS) for the directory rather than a single object.
daemon:
Remove the need for $(LDLIBS_xenconsoled), use $(LDLIBS) instead.
Remove the need for $(CONSOLE_CFLAGS-y) and use $(CFLAGS-y)
instead.
client:
Remove the unused $(LDLIBS_xenconsole)
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
This avoid the need to generate the _paths.h header when the
information is from autoconf anyway.
They are no more users of the "buildmakevars2header" macro, so it can
be removed from "Config.mk".
Also removed the extra "-f" flag where "$(RM)" is used (xl/Makefile).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This patch replaces the usage of xc_map_foreign_range with
xenforeignmemory_map from the stable xenforeignmemory library. Note
there are still other uses of libxc functions which prevents removing
the dependency.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Literal strings are not meant to be modified. So we should use const
char * rather than char * when we want to store a pointer to them.
Take the opportunity to remove the cast (char *) in console_init(). It
is unnecessary and will remove the const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Switch all usages of xs_daemon_open*() and xs_domain_open() to use
xs_open() instead. While at it switch xs_daemon_close() users to
xs_close().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Today there are multiple copies of the ROUNDUP() macro in various
sources and headers. Define it once in tools/include/xen-tools/libs.h.
Using xen-tools/libs.h enables removing copies of MIN() and MAX(), too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
c-indent-level isn't considered a safe variable, and "solaris" isn't a
recognised C style. Both cause prompts when opening the files.
Fix all blocks up per CODING_STYLE
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Add --replace-escape option to xenconsoled, which replaces ESC with
'.' in console output written to log file. This makes it slightly safer
to do tail -f on a console output of untrusted guest.
The pty output is unaffected by this option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: move variables into a narrower scope ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Unilaterally making string.h a prerequisite for console.h is going to
break build for a lot of consumers of console.h.
Define a macro for the new flex ring. Consumers which want to use it
should define the macro.
Partially revert af8d935641.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch finally adds the support for vuart console. It adds
two new fields in the console initialization:
- optional
- use_gnttab
optional flag tells whether the console is optional.
use_gnttab tells whether the ring buffer should be allocated using
grant table.
The VUART console is enabled ony for ARM.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds the support for multiple consoles and introduces the
iterator functions to operate on multiple consoles.
The functions called by the iterators check that they are operating
on valid I/O parameters. This ensures that if a particular console is
not initialized then the functions will not do anything for that
console type.
This patch is in preparation to support a new vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new handle_console_ring function. This function
reads the data from the ring buffer on receiving an event.
The initialization of event channel poll fd to -1 is moved inside the
handle_console_ring function as they are related. There should be no
change in the behavior as there is no functional change.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_evtchn_unmask function. This function
unmasks the console event channel if it is masked for some timeout
period.
One optimization that has been done is to merge the two for loops.
One for loop was used to iterate through all domains and
unmask the domain event channels which had been rate limited for a
specified duration.
The other for loop was run to add the event channel fd and the tty fd to
the poll list.
These two for loops were merged so that the these operations can be done
in one iteration instead of two iterations.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_tty_fd function. This function
adds the tty fd to the list of polled fds.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_evtchn_fd function. This
function adds the console event channel FD to list of polled FDs.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_init function. This function
initializes the console structure.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole functions take domain structure as input. These functions shall be
modified to take console structure as input since these functions typically perform
console specific operations.
Also the console specific functions starting with prefix "domain_" shall be modified
to "console_" to indicate that these are console specific functions.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The console->conspath name is changed to console->xspath as it is
clear from the name that it is referring to xenstore path.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole uses a domain structure which contains console specific fields. This
patch defines a new console structure, which would be used by the xenconsole
functions to perform console specific operations like reading/writing data from/to
the console ring buffer or reading/writing data from/to console tty.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEFINE_XEN_FLEX_RING(xencons) defines common helper functions such as
xencons_queued() to tell the current size of the ring buffer,
xencons_mask() to mask off the index, which are useful helper functions.
pl011 emulation code will use these helper functions.
io/console.h includes io/ring.h which defines DEFINE_XEN_FLEX_RING.
In console/daemon/io.c, string.h had to be included before io/console.h
because ring.h uses string functions.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently the default behaviour of the xenconsole client is to
ignore any input to stdin, unless stdin and stdout are both
ttys. The new option allows to manually overwrite this, causing the
client to forward input regardless.
Signed-off-by: Felix Schmoll <eggi.innovations@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The console client will write 0x00 to that fd before entering console
loop to indicate its readiness.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Place the PID file under XEN_RUN_DIR by default. Note this change the
default location from /var/run to /var/run/xen.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The help message did not include information about the --type parameter.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Otherwise the name clashes with the libxc evtchn_compat use of the
name (which is compat, so can't really change), and triggers an error
with older gcc relating to redefining typedefs (which are not allowed
per the spec, but which are tolerated by newer gcc)
None of qemu-trad, qemu-xen or mini-os actually use this type, so this
should be fine. Note that the library API is not actually stable until
4.7 is releases.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All other error paths in the infinite loop in handle_io use break, so
as to free resources.
CID: 1351226
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Jason Andryuk