We want a function for setting fds to nonblocking, so introduce one.
This is a very similar requirement to that for libxl_fd_set_cloexec,
so make it common with that.
While we're at it, fix a few deficiences that make this latter
function less desirable than it could be:
* Change the return from 0/-1 (like a syscall) to a libxl error code
* Take a boolean parameter for turning the flag on and off
* Log on error (and so, take a ctx for this purpose)
Change callers of libxl_fd_set_cloexec to notice errors. (Although,
such errors are highly unlikely.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Replace the existing API for retrieving high-level events (events
about domains, etc.) from libxl with a new one.
This changes the definition and semantics of the `libxl_event'
structure, and replaces the calls for obtaining information about
domain death and disk eject events.
This is an incompatible change, sorry. The alternative was to try to
provide both the previous horrid API and the new one, and would also
involve never using the name `libxl_event' for the new interface.
The new "libxl_event" structure is blacklisted in the ocaml bindings
for two reasons:
- It has a field name "type" (which is a keyword in ocaml);
the ocaml idl generator should massage this field name on
output, to "type_" perhaps.
- The ocaml idl generator does not support KeyedUnion.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
* dolog leaked the log message (!)
* main() leaked the config_data (perhaps a false positive from valgrind,
but it's nicer to tidy it up).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Also add the global sharing statistics to the libxl physinfo. This is a slight
departure from libxc, but there's no reason libxl physinfo can't include extra
bits of useful and relevant information.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Add code to track the address of the VM generation ID buffer across a
save/restore or migrate, and increment it as necessary.
The address of the buffer is written into xenstore by hvmloader at
boot time. It must be read from xenstore by the caller of
xc_domain_save() and then written back again by the caller of
xc_domain_restore().
Note that the changes to xc_save.c and xc_restore.c are merely
sufficient for them to build.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This allow the caller to react as they think is appropriate. xl now prints a
message much like the library did previously, although hopefully somewhat more
informative.
Update the xl(1) man page to be similarly more informative.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
The other integer request types which shutdown supported are not
useful. Specifically:
* "suspend" is not usable via this interface since it requires other
scaffolding, libxl_domain_suspend provides this already.
* "halt" is the same as "poweroff".
* "crash" is unused and at least Linux does not implement it. If a user
steps forward then libxl_domain_crash is trivial to add.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Since a destroy is considered a forced shutdown, there's no point in
passing a force parameter. All the occurences of this function have
been replaced with the proper syntax.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Supports the xl subcommand sched-sedf.
The man page is only a minimal version (copy from xm man page without
examples). BTW: the xm man page seems not to be in sync with xm sched-sedf -h
regarding the time units. I used milliseconds in the xl implementation.
Only minimal semantical checks of parameters.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Supports the xl subcommand sched-credit2.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Adds cpupool awareness to output of xl sched-credit. Output can now be
restricted to a specific cpupool. The domains are printed for each cpupool
seperately.
The loop over cpupools and domains is seperated from the main command
implementation to be able to support other schedulers as well.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The help text of xl sched-credit supported long options. Neither the man page
nor the implementation did.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
At restore time, the file descriptor opened on the migration state file is
still open in the device model. Let's apply FD_CLOEXEC to it.
This patch provides libxl_fd_set_cloexec to users of libxl, instead of keeping
this function internal.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is much more natural. Continue to support the old syntax in xl
but deprecate it.
[ Fixed up a long line in xl_cmdimpl.c. -iwj ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Returns a cfg list as a libxl_string_list.
Use this to simplify the parsing of device model extra args.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Add an enum at the libxl level with a hopefully descriptive set of names.
Deprecate the use of an integer in xl cfg files.
Signed-off-by: Ian Campbell
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
I want it for get_long but we might as well have it everywhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Introduce acpi_s3 and acpi_s4 configuration options (default=1). The
S3 and S4 packages are moved into separate SSDTs and their inclusion
is controlled by the new configuration options.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Currently takes a string.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
libxl_device_nic_list returns an array of libxl_device_nic and
libxl_device_nic_getinfo retrieves further information.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Now that IDL type destructors are no longer libxl_*_destroy we can use the more
common libxl_NOUN_VERB structure here.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Destroy is an overloaded term which would commonly like to be used for actual
destructive operations, such as destroying a domain etc.
Dispose isn't a great term but it does the job.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
I ran the following and committed the result. ^I is an actual hard tab
for i in $(grep -l --exclude=*_[ly].\[ch\] '^I' tools/libxl/*.[ch]) ; do
cat $i | expand | sponge $i
done
There are some actually wrong indentations too, I'll fix those up
manually.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Without this in the "xl help" line for pci-list-assignable-devices the command
name merges with the first word of the help. Since the bash completion support
parses "xl help" this leads to "pci-list-assignable-devicesList" being
presented as an option instead of the correct command name.
We also need to filter out lines which start with more than one space in the
bash completion support to stop "List" appearing as a possible command name
after the change to wrap it.
Doesn't address the fact that some help text overflows 80 columns.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
def_getopt already checks for a minimum number of arguments for us.
"xl save" simply need to use the correct argument for that value,
contrary to the change I made in 23876:b113d626cfaf
"xl block-list" does not need to check for at least 2 arguments, since
it's already been done by def_getopt.
"xl network-list" would previous accept zero arguments and just print
the table header. Insist on a domain argument.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The save file paramter is required so ensure we have enough arguments.
The config filename is optional so do not use argv[optind+3], which
may well happen to be NULL when the paramter is not present but
relying on that is pretty gross.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit exactly the results of running
find \! -iname '*.txt' -type f -print0 | xargs -0 perl -p -i.bak -E 's/\s+\n/\n/'
Signed-off-by: Wei Liu <liuw@liuw.name>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed: Ian Jackson <ian.jackson@eu.citrix.com>
This patch makes device_model_{version,override} work for pure pv
guest, so that users can specify upstream qemu as pure pv backend
other than traditional qemu-xen.
This patch also adds device_model_args_{pv,hvm} options for pv and
hvm guest respectively.
Internally, original libxl__create_xenpv_qemu allocates a new empty
dm_info (struct libxl_device_model_info) for every xenpv qemu created.
Now the caller of libxl__create_xenpv_qemu is responsible for
allocating this dm_info.
Signed-off-by: Wei Liu <liuw@liuw.name>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since libxl_init_build_info now needs an error return and a ctx (to
log to) switch all libxl_init_*_info to have an int return and a ctx.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Also caught one place (in libxl__domain_restore_common) which used
info->u.hvm.pae even if !hvm. (fortunately the value was unused in
xc_domain_restore).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This is generally used in the Xen universe, rather than "FV" which is
not used elsewhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Other shutdown reasons all end up saying something useful while
suspend does not. With this patch the log looks like:
Domain 670 is dead
Domain has suspended.
Done. Exiting now
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Modelled after LIBXL_UUID_... (where I also add FMTLEN).
signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
These subcommands already had "-n" dry run options. Make -N do the
same thing, and deprecate those -n options.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This sets a global dryrun_only variable, which individual commands are
expected to honour. To avoid accidents, we introduce a new can_dryrun
member in the command table, which is initially set to 0 for each
command.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Ian Jackson
Andres Lagar-Cavilla
Paul Durrant
Wei Liu
Ian Campbell
Roger Pau Monne
Juergen Gross
Anthony Perard
Wei Liu