Also add the global sharing statistics to the libxl physinfo. This is a slight
departure from libxc, but there's no reason libxl physinfo can't include extra
bits of useful and relevant information.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Tim Deegan <tim@xen.org>
Supports the xl subcommand sched-sedf.
The man page is only a minimal version (copy from xm man page without
examples). BTW: the xm man page seems not to be in sync with xm sched-sedf -h
regarding the time units. I used milliseconds in the xl implementation.
Only minimal semantical checks of parameters.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Supports the xl subcommand sched-credit2.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Adds cpupool awareness to output of xl sched-credit. Output can now be
restricted to a specific cpupool. The domains are printed for each cpupool
seperately.
The loop over cpupools and domains is seperated from the main command
implementation to be able to support other schedulers as well.
Signed-off-by: juergen.gross@ts.fujitsu.com
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Commit exactly the results of running
find \! -iname '*.txt' -type f -print0 | xargs -0 perl -p -i.bak -E 's/\s+\n/\n/'
Signed-off-by: Wei Liu <liuw@liuw.name>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed: Ian Jackson <ian.jackson@eu.citrix.com>
These subcommands already had "-n" dry run options. Make -N do the
same thing, and deprecate those -n options.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This sets a global dryrun_only variable, which individual commands are
expected to honour. To avoid accidents, we introduce a new can_dryrun
member in the command table, which is initially set to 0 for each
command.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Adds support for assigning a label to domains, obtaining and setting the
current enforcing mode, and loading a policy with xl command and libxl
header when the Flask XSM is in use. Adheres to the changes made by the
patch to remove exposure of libxenctrl/libxenstore headers via libxl.h.
Signed-Off-By: Machon Gregory <mbgrego@tycho.ncsc.mil>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
netchannel2 was never widely deployed and no supported kernel includes
either the front- or back-ends. The last known kernel with this
support was the xen.git 2.6.31 branch which has been unsupported for
ages.
xl will warn the user if it spots a "vif2" configration item but
otherwise support is completely removed.
Work is ongoing to add the interesting features of netchannel2 as
protocol extensions to netchannel1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Although advertised via the usage output, xl cpupool-list -l just
returns ERROR_NI, which does not show up on the console. Instead the
output is empty, which is not exactly what --long hints to. To avoid
confusion remove the line from the help output and just ignore the -l
option properly until it gets finally implemented.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
New xl command cpupool-numa-split which will create one cpupool for each
numa node of the machine. Can be called only if no other cpupools than Pool 0
are defined. After creation the cpupools can be managed as usual.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Add a new library function libxl_cpupool_rename() and a new xl command
xl cpupool-rename to support renaming of cpupools.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The user interfaces for cpupools are extended to support numa machines:
- xl cpupool-create supports now specifying a node list instead of a cpu list.
The new cpupool will be created with all free cpus of the specified numa
nodes.
- xl cpupool-cpu-remove and xl cpupool-cpu-add can take a node number instead
of a cpu number. Using 'node:1' for the cpu parameter will, depending on
the operation, either remove all cpus of node 1 in the specified cpupool,
or add all free cpus of node 1 to the cpupool.
libxl is extended with the following functions to support this feature:
int libxl_cpupool_cpuadd_node(libxl_ctx *ctx, uint32_t poolid, int node, int *cpus)
int libxl_cpupool_cpuremove_node(libxl_ctx *ctx, uint32_t poolid, int node, int *cpus)
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Adds option -n/--numa to xl info command to print topology information.
No numa information up to now, as I've no machine which will give this info
via xm info (could be a bug in xm, however).
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Support of cpu pools in libxl and xl:
library functions
xl cpupool-create
xl cpupool-list
xl cpupool-destroy
xl cpupool-cpu-add
xl cpupool-cpu-remove
xl cpupool-migrate
Renamed all cpu pool related names to *cpupool*
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
XL sub-commands are expected to parse their arguments relative to the
global variable "optind" rather than treating argc+argv as zero
based. This is because the argc+argv passed to sub-commands include
the entire original command line, not just the sub command specific bits.
Not all commands do this and they are therefore broken if the user
uses "xl -v command", correct such problems
dump-core:
- did not handle "-h" option.
{network,network2,block}-{attach,list,detach} :
- handled arguments without reference to optind
- checked number of arguments before processing getopt loop,
breaking "-h" option handling
An example of the breakage:
# xl -v block-list d32-2
Vdev BE handle state evt-ch ring-ref BE-path
block-list is an invalid domain identifier
51712 0 1 4 13 8 /local/domain/0/backend/vbd/1/
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch implements the new protocol for handling pv consoles and
emulated serials as described in the document docs/misc/console.txt.
The changes are:
- xenconsoled: do not write the pty under serial in xenstore if
xenconsoled is handling a consolepath;
- xenconsole: implement support for an explicit console type parameter;
the parameter can be "pv", to specify that the user wants to
connect to a pv console, or "serial", to specify that the user wants to
connect to an emulated serial. If the type parameter hasn't been
specified be the user, xenconsole tries to guess which type of console
it has to connect to, defaulting to pv console for pv guests and
emulated serial for hvm guests.
- xenconsole: use the new xenstore paths;
- libxl: rename libxl_console_constype to libxl_console_consback:
constype is used to to specify whether qemu or xenconsoled provides the
backend, so I renamed it to libxl_console_consback to make it more
obvious that we are talking about backends;
- libxl: add a new libxl_console_constype to specify if the console is
an emulated serial or a pv console;
- libxl: support the new xenconsole "type" command line parameter;
- libxl: use the "output" node under console in xenstore to tell qemu
where do we want the output of this pv console to go;
- remove the legacy "serialpath" from xenconsoled altogether
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also: update the QEMU_TAG to pull in the qemu part of these changes.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Implement a new libxl function libxl_device_pci_list_assignable. This is
used to implement the xl list-assignable-pci-devices command and part of
the implementation is used to make sure that PCI devices are not multiply
assigned to one or more domU's before doing the passthrough assignment.
The function libxl_device_pci_list changes to libxl_device_pci_list_assigned
due to a parameter change for consistency with pci_list_assignable.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Implement xl vncviewer. The only difference from xm vncviewer is that we
obey the VNCVIEWER environment variable.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Implements dump-core command which is similar to xm dump-core except
that it requires an additional argument which is the target filename.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
used as a replacement of xm in xendomains:
- dryrun and quiet, long options to xl create;
- l, option to xl list.
printf_info is now used to print the configuration of the running VMs so
the output has been reformatted to be similar to the output of xm list -l.
There is still one command used in xendomains that is not implemented in
xl and not covered by this patch: xm shutdown. However a patch has been
sent to the list in the past and we are expecting a new version of it
soon.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Fix the truncation code so that it always accepts an exact match,
even when one command is a prefix of another one. This fixes,
e.g., "xl list"
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
- When use mem-set, I got suspicious error output:
# xl mem-set 1 256g
setting domid 1 memory to : 268435456
[0] libxl.c:2535:libxl_set_memory_target: memory_dynamic_max must be
less than or equal to memory_static_max
: Success
- String generated by strdup() should be freed
- When using 'xl help', mem-max and mem-set's output is not as intend,
and it also breaks bash completion, fix it.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Fix two command-line parsing problems:
- the argc check is wrong: it must be provided with the frontend
device
- the ro/rw mode is optional, so default to rw if it is absent
Also, update the usage message accordingly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Allow mem-set and mem-max to take 'b', 'k', 'm', 'g' and 't' as
scaling suffixes for bytes, kilobytes, mega, etc. An unadorned number
is still treated as kilobytes so no existing users should be affected.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Andres Lagar-Cavilla
Jean Guyader
Juergen Gross
Ian Campbell
Wei Liu
Ian Jackson
Machon Gregory
Andre Przywara
Stefano Stabellini
Stefano Stabellini
Zhigang Wang
Gianni Tedesco
Keir Fraser