As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Move (page aligned) buffer allocations in {os}_privcmd_alloc_hypercall_buffer
into a global function xc_memalign. This API is also used by Remus
compression code to allocate compression caches that need to be page aligned.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
It's not clear why a userspace lzma decode would want to use that
particular value, what bearing it has on anything or why it would
assume it could use 1/3 of the total RAM in the system (potentially
quite a large amount of RAM) as opposed to any other limit number.
Instead, hardcode 32Mby.
This reverts 22830:c80960244942, removes the xc_get_physmem/physmem
function entirely, and replaces the expression at the call site with a
fixed constant.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
NetBSD doesn't have sysconf(_SC_PHYS_PAGES).
Factor physmem() out into os-dependent files and rename it to
xc_get_physmem() so as not to pollute the namespace.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This helps ensure that the osdep abstraction is complete by
allowing us to avoid including xc_private.h.
All the other OS backends could benefit from the same treatment but
since I cannot compile test I did not do this.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Transition to xc_osdep_handle is now complete and nothing uses
(or should be using) it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
i.e. not running on a real hypervisor
Allows users of the library to adjust behaviour. I don't especially
like this violation of the abstraction but both oxenstored and xapi
use this to avoid difficult to simulate operations when running on the
simulator.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
do_privcmd() was only ever used by do_xen_hypercall() so remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
This patch introduces the basic infrastructure and uses it for open
and close operations on privcmd, evtchn and gnttab devices.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The xc_interface previously passed to xc_gnttab_* was only used for
logging which can now be done via the xc_gnttab handle instead.
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also update QEMU_TAG to pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
They simply make hypercalls and perform other operations via the
abstract interface. Create xc_gnttab.c and move those functions there.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Not actually used here but useful to confirm that a handle is passed
down to each location where it will be required once we switch to
hypercall buffers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove all the magic surrounding the special Xen devices in Linux
specific code whereby we attempt to figure out what the correct
major:minor number is and check the the existing device has these
numbers etc. In 2010 we really should be able to trust that the
platform has created the devices correctly or provide correct
configuration settings such that they are without resorting to tearing
down the platform configured state and rebuilding it.
tools/hotplug/Linux/xen-backend.rules already contains the necessary
udev rules to create /dev/xen/evtchn and friends in the correct place.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
This patch makes xc_linux properly deal with:
1. discovering and creating device nodes if necessary
2. the new form of xen/<dev> device names soon to be used by the
kernel
This changes the logic slightly:
- If a device node already exists with the proper name, then it uses
it as-is, assuming it has already been correctly created.
- If the path doesn't exist, or it exists but isn't a device node,
and
it has successfully found the major/minor for the device, then
(re)create the device node.
Since this logic is identical for gntdev and evtchn, make a common
function to handle both.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Just like the kernel, the fallback implementation of
xc_map_foreign_bulk() should clear the error indication array upon
success.
Also, a few allocations were needlessly using calloc() instead of
malloc().
Finally, in xc_domain_save() allocate the error indicator array once
(along with the other arrays) instead of using realloc() (without
error checking) in the loop body.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
privcmd_ioctl returns EINVAL if the type is not supported.
This fixes the guest booting issue caused by C/S 20791.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Replace all calls to xc_map_foreign_batch() where the caller doesn't
look at the passed in array to check for errors by calls to
xc_map_foreign_pages(). Replace all remaining calls by such to the
newly introduced xc_map_foreign_bulk().
As a sideband modification (needed while writing the patch to ensure
they're unused) eliminate unused parameters to
uncanonicalize_pagetable() and xc_map_foreign_batch_single(). Also
unmap live_p2m_frame_list earlier in map_and_save_p2m_table(),
reducing the peak amount of virtual address space required.
All supported OSes other than Linux continue to use the old ioctl for
the time being.
Also change libxc's MAJOR to 4.0 to reflect the API change.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
libxc accepts the new return code from privcmd mmap, which indicates a page
being mapped is actually paged out. Spin until the page is paged in and return
as normal to the caller. This allows memory paging to work transparently with
existing tools.
Since libxc runs in user-space, as does the pager, both processes will be
scheduled and run. This enables the page to be paged in without needing to
spin in kernel mode (which would cause a dead-lock).
Signed-off-by: Patrick Colp <Patrick.Colp@citrix.com>
running qemu with valgrind I found I couple of small memory leaks in
libxc, this patch fixes them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Modify xc_map_foreign_range and xc_map_foreign_ranges to call
mmap_map_foreign_batch. This eliminates the need for multiple privcmd
mmap ioctls. Now only IOCTL_PRIVCMD_MMAPBATCH is required.
Signed-off-by: Patrick Colp <Patrick.Colp@citrix.com>
xc_gnttab_map_domain_grant_refs permits to simply map several pages
from the same domain.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
This patch adds the ability to set the number of slots that may be
used for mapping grant references, using the gntdev user-space grant
reference mapping driver.
Signed-off-by: Derek Murray <Derek.Murray@cl.cam.ac.uk>
Ian Campbell
David Vrabel
Shriram Rajagopalan
Ian Jackson
Christoph Egger
Keir Fraser