Thus far mem_access and mem_sharing memops had been able to signal
to Xen to start pulling responses off the corresponding rings. In this patch
we retire these memops and add them to the option to the vm_event_op domctl.
The vm_event_op domctl suboptions are the same for each ring thus we
consolidate them into XEN_VM_EVENT_ENABLE/DISABLE/RESUME.
As part of this patch in libxc we also rename the mem_access_enable/disable
functions to monitor_enable/disable and move them into xc_monitor.c.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
In preparation for allowing for introspecting ARM and PV domains the old
control interface via the hvm_op hypercall is retired. A new control mechanism
is introduced via the domctl hypercall: monitor_op.
This patch aims to establish a base API on which future applications can build
on.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
The only use-case of the mem_event_op structure had been in mem_paging,
thus renaming the structure mem_paging_op and relocating its associated
functions clarifies its actual usage.
As part of this fix-up we also convert the gfn's in the toolstack to be
explicitely 64-bit wide and clean the code a bit.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
On ARM the virtual GIC may differ between each guest (emulated GIC version,
number of SPIs...). This information is already known at the domain creation
and can never change.
For now only the gic_version is set. In the long run, there will be more
parameters such as the number of SPIs. All will be required to be set at the
same time.
A new arch-specific structure arch_domainconfig has been created, the x86
one doesn't have any specific configuration, for now, a dummy structure
(C-spec compliant) has been created.
Some external tools (qemu, xenstore) may be required to create a domain.
Rather than asking them to take care of the arch-specific domain
configuration, let the current function (xc_domain_create) chose a
default configuration and introduce a new one (xc_domain_create_config).
This patch also drops the previously introduced DOMCTL arm_configure_domain
in Xen 4.5, as it has been made useless.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
The commit a8f8a590e0
"libxc: Check xc_domain_maximum_gpfn for negative return values"
introduced an regression in tools outside libxc (migrate v2)
which wanted the unfiltered GPFN value. Said commit added
a wrapper which added +1 if there were no errors.
To make it work pre-commit a8f8a59 we add an xc_domain_nr_gpfns
which will add +1 if there are no errors (and change all in-tree
callers to use it). The xc_domain_maximum_gpfn will return the
unfiltered GPFN value.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A number of changes to XEN_SYSCTL_topologyinfo interface:
* Instead of copying data for each field in xen_sysctl_topologyinfo separately
put cpu/socket/node into a single structure and do a single copy for each
processor.
* A NULL cputopo handle passed is a request for maximum number of CPUs
(num_cpus). If cputopo is valid and num_cpus is smaller than the number of
CPUs in the system then -ENOBUFS is returned (and correct num_cpus is provided)
* Do not use max_cpu_index, which is almost always used for calculating number
CPUs (thus requiring adding or subtracting one), replace it with num_cpus.
* There is no need to copy whole op in sysctl to user at the end, we only need
num_cpus.
* Rename xen_sysctl_topologyinfo and XEN_SYSCTL_topologyinfo to reflect the fact
that these are used for CPU topology. Subsequent patch will add support for
PCI topology sysctl.
* Replace INVALID_TOPOLOGY_ID with "XEN_"-prefixed macros for each invalid type
(core, socket, node).
Update sysctl version to 0x0000000C
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. As such
we return now the return value (or zero for success).
The max_mfn is now passed in as the parameter.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. We stash
the gpfns value as an parameter. Since we use it in three
of places we might as well update xc_domain_maximum_gpfn
to do the right thing.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- space: remove space after '(' or before ')' in 'if' condition;
- indention: align function definition/call arguments;
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When commit 6865e52b78, "PCI multi-seg: adjust domctl interface",
is introduced, we missed to sync that head file.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
No-one (including me) paid attention during review that these
structures don't adhere to the naming requirements of the public
interface: Consistently use xen_ prefixes at least for all new
additions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The vGIC will emulate the same version as the hardware. The toolstack has
to retrieve the version of the vGIC in order to be able to create the
corresponding device tree node.
A new DOMCTL has been introduced for ARM to configure the domain. For now
it only allow the toolstack to retrieve the version of vGIC.
This DOMCTL will be extend later to let the user choose the version of the
emulated GIC.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduced some new xl commands to enable/disable Cache Monitoring
Technology(CMT) feature.
The following two commands is to attach/detach the CMT feature
to/from a certain domain.
$ xl psr-cmt-attach domid
$ xl psr-cmt-detach domid
This command is to display the CMT information, such as L3 cache
occupancy.
$ xl psr-cmt-show cache_occupancy <domid>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xen added a new platform_op hypercall for generic MSR access, and this
is the the tool side change to wrapper the hypercall into xc APIs.
For non-preemptible batch resource operations, group them in entries of
xc_resource_op structure. For preemptible ones, use multiple
xc_resource_op structure instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add xc_sched_rtds_* functions to interact with Xen to set/get domain's
parameters for rtds scheduler.
Note: VCPU's information (period, budget) is in microsecond (us).
Signed-off-by: Meng Xu <mengxu@cis.upenn.edu>
Signed-off-by: Sisu Xi <xisisu@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
[ ijc -- xenctrl.h has moved to tools/libxc/include, adjust patch to match ]
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tamas K Lengyel
Julien Grall
Konrad Rzeszutek Wilk
Ian Campbell
Boris Ostrovsky
Chao Peng
Tiejun Chen
Jan Beulich
Dongxiao Xu
Meng Xu
Stefano Stabellini