Currently we hardcode various paths such as $libexec/xen/{bin,boot},
however some downstreams (notably Debian) would like instead to
install things into $libexec/xen-X.Y/{bin,boot} as part of allowing
multiple versions of the tools packages to be installed.
Since this currently involves patching configure its a bit fiddly,
provide a configure option for the leaf dir instead, name it
--with-libexec-leaf-dir similar to the existing
--with-sysconfig-leaf-dir.
Rather than have the determination of the full path in both configure
and config/Paths.mk.in move it into configure only. Also for
consistency move the other LIBEXEC_* to configure, even though they
are only substituted into Paths.mk.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: 805508@bugs.debian.org
[ ijc -- removed stray ` ]
Originally when user runs ./configure --enable-systemd and systemd
development library is not available the build system silently disables
systemd support. This is not in line with normal expectation.
Instead, configure should error out when user has asked for systemd
support but development libraries can't be found.
Reported-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
315a8722b4 bumped the version after 4.6
branched. This picks up that change into the generated files.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Changeset 1166ecf ('tools/Rules.mk: Don't optimize debug builds; add
macro debugging information') exposed a bug whereby the autoconf stuff
in tools was setting its own debug value (defaulting to ENABLED, even
for releases) instead of honoring the value set in Config.mk.
After that changeset, if the global build has -D_FORTIFY_SOURCE
enabled (as is the default in CentOS 7 rpmbuild), then the tools build
will fail (because debug builds default to on).
There should be only one place to specify whether to build debug or
not, and Config.mk is already included by the relevant makefiles. So
simply remove the tools/configure debug option and everything falls
into place naturally.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Per http://wiki.qemu.org/ChangeLog/1.0 and the fact that no currently
supported distro ships the x86 system emulator binary as 'qemu', this
changes the default when a user specifies --with-system-qemu without a
PATH to 'qemu-system-i386', otherwise the default results in a
non-functional setup.
[ Reran autogen.sh -iwj ]
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When --with-system-qemu is used, it is possible that we cannot find
qemu-system-i386 in LIBEXEC_BIN, which can cause error in xencommons
init script and xen-qemu-dom0-disk-backend.service systemd service.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The removal of the udev rules highlighted that although it has been
replaced by "xl devd" there isn't an initscript to replace it.
To enable this add a --pidfile option to xl devd.
Tested on Linux by running the script in dom0 and checking the daemon
was started/stopped, but not in an actual driver domain environment
since I don't have one conveniently available. I also checked that
running without the --pidfile option still works.
Scripts mainly cribbed from the xencommons for each platform.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
They are no longer needed, having been replaced by a daemon for
driverdomains which will run scripts as necessary.
Worse yet, they seem to be broken for script-based block devices, such
as block-iscsi. This wouldn't matter so much if they were never run
by default; but if you run block-attach without having created a
domain, then the appropriate node to disable running udev scripts will
not have been written yet, and the attach will silently fail.
Rather than try to sort out that issue, just remove them entirely.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I have upgraded the box which I use to do committing (and hence run
autogen.sh on) from Debian Wheezy to Jessie, resulting in a upgrade
from autoconf 2.69-1 to 2.69-8. To avoid noise from this transition
when the next configure.ac change occurs regenerate those files now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When the property "clock-frequency" is present in the DT timer node, it
means that the bootloader/firmware didn't correctly configure the
CNTFRQ/CNTFRQ_EL0 on each processor.
The best solution would be to fix the offending firmware/bootloader,
although it may not always be possible to modify and re-flash it.
As it's not possible to trap the register CNTFRQ/CNTFRQ_EL0, we have
to extend xen_arch_domainconfig to provide the timer frequency to the
toolstack when the property "clock-frequency" is present to the host DT
timer node. Then, a property "clock-frequency" will be created in the guest
DT timer node if the value is not 0.
We could have set the property in the guest DT no matter if the property
is present in the host DT. Although, we still want to let the guest
using CNTFRQ in normal case. After all, the property "clock-frequency"
is just a workaround for buggy firmware.
Also add a stub for fdt_property_u32 which is not present in libfdt <
1.4.0 used by distribution such as Debian Wheezy.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Chris Brand <chris.brand@broadcom.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
binutils 2.22 changed ld default from --copy-dt-needed-entries
to -no-copy-dt-needed-entries. This revealed that some objects
are linked implicitly with libtinfo and newer ld fails to build
relevant executables.
Below is short explanation why we should not do that...
http://fedoraproject.org/wiki/UnderstandingDSOLinkChange says:
The default behaviour for ld (my note: before version 2.22) allows
users to 'indirectly' link to required objects/libraries through
intermediate objects/libraries. While this is convenient, it can
also be dangerous because it makes your program's dependencies tied
to the dependencies of other objects. If those objects ever change
their linkages, they can break your program without any changes
to your own code!
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The current base directory /var/xen/dump for domU dumps will be patched
to /var/lib/xen/dump by most distros to follow FHS.
This change does three things:
- change the default from /var/xen/dump to /var/lib/xen/dump
- provide a configure option to avoid patching the source.
- update docs to refer to the new default location
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s,/var,LOCALSTATEDIR, in help test, ran autogen.sh ]
We are going to need this to generate the userspace flask.h header.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh ]
There was a missing [ in the aio check which lead to never check if aio
is present on the platform.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Allow the user to pass additional nodes to the guest device tree. For
this purpose, everything in the node /passthrough from the partial
device tree will be copied into the guest device tree.
The node /aliases will be also copied to allow the user to define
aliases which can be used by the guest kernel.
A simple partial device tree will look like:
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <2>;
passthrough {
compatible = "simple-bus";
ranges;
#address-cells = <2>;
#size-cells = <2>;
/* List of your nodes */
}
};
Note that:
* The interrupt-parent property will be added by the toolstack in
the root node
* The properties compatible, ranges, #address-cells and #size-cells
in /passthrough are mandatory.
The helpers provided by the libfdt don't perform all the necessary
security check on a given device tree. Therefore, only trusted device
tree should be used.
Note: The partial device tree code requires the presence of libfdt
functions which have been only correctly exported in libfdt 1.4.0 and
higher. All the major distributions but Debian Wheezy are using v1.4.0
or higher. It has been decided to disable partial device tree support on
OSes where libfdt doesn't meet the requirement.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
The functions fdt_{first,next}_subnode may not be available because:
* It has been introduced in 2013 => Doesn't work on Wheezy
* The prototype exists but the functions are not exposed. Don't ask
why...
The later has been fixed recently in the dtc repo [1]
When the functions are not available, implement our own in order to use
them in a following patch.
Note that the _hidden attribute is placed in both the prototype and the
declaration because some version of libfdt expose the prototype but not
the declaration.
[1] git://git.kernel.org/pub/scm/utils/dtc/dtc.git
commit a4b093f7366fdb429ca1781144d3985fa50d0fbb
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Avoid late build failure in openSUSE 11.4, it has just pixman-0.20:
....
[ 211s] ERROR: pixman >= 0.21.8 not present. Your options:
[ 211s] (1) Preferred: Install the pixman devel package (any recent
[ 211s] distro should have packages as Xorg needs pixman too).
[ 211s] (2) Fetch the pixman submodule, using:
[ 211s] git submodule update --init pixman
....
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Some systems have python-config include -D_FORTIFY_SOURCE in the
CFLAGS. But -D_FORTIFY_SOURCE does not (currently) work with -O0, and
-O0 is enabled in debug builds (since 1166ecf781). As a result, on
those systems, debug builds fail.
Work around this problem as follows:
* In configure, detect -D_FORTIFY_SOURCE in $(python-config --cflags)
* If detected, set the new autoconf substitution and make variable
PY_NOOPT_CFLAGS to -O1.
* In tools/Rules.mk, where we add -O0, also add PY_NOOPT_CFLAGS
(which will override the -O0 with -O1 if required).
Overriding the -O0 is better than disabling Fortify because the
latter might have an adverse security impact. A user who wants to
disable optimisation completely even for Python and also disable
Fortify can set the environment variable
EXTRA_CFLAGS_XEN_TOOLS='-U_FORTIFY_SOURCE -O0'
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Euan Harris <euan.harris@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Don Slutz <dslutz@verizon.com>
QEMU upstream requires the use of pixman. When pixman is not present the
system, the configure of QEMU will fail with:
ERROR: pixman not present. Your options:
(1) Preferred: Install the pixman devel package (any recent
distro should have packages as Xorg needs pixman too).
(2) Fetch the pixman submodule, using:
git submodule update --init pixman
I think we can use by default the version on the system. So check it
a Xen configuration time to avoid a build issue later.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- reran autogen.sh, adjusted comment ]
A pkg-config file for libxl. It also contains two variables
(xenfirmwaredir and libexec_bin) so that tools that are very keen on
knowing the locations of Xen binaries (say, libvirt) can use them to
determine the location of the binaries.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This was disabled by default in Xen 4.4. Since xend has now been
removed from the tree I don't believe anything is using it.
We need to pass an explicit CONFIG_BLKTAP1=n to qemu-xen-traditional
otherwise it defaults to y and doesn't build.
This patch does all the ground work, the tools/blktap directory will
be removed in the next (*huge*) patch.
Note that this has no impact on blktap2, which is what libxl supports.
blktap1 was only usable via xend which has already been removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Various configure scripts have the Xen version built into them by
autoconf. Rereun autogen.sh (on Debian wheezy) so that they all say
4.6. There are no changes other than to doc comments, usage messages,
and so forth.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Currently --with-systemd=DIR1 --with-systemd-modules-load=DIR2 will set
both XEN_SYSTEMD_DIR and XEN_SYSTEMD_MODULES_LOAD to DIR1. The reason is
that both AC_ARG_WITH() use 'systemd' as the name for the internal
variable. As a result the value of the first option is also use as the
value for the second option. Fix this by using another variable name.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ijc -- ran autogen.sh as requested]
When xen is configured with --disable-ocamltools then oxenstored will
still be the default if all required ocaml devel packages are installed.
The reason is that xenstored.m4 is included before the ocamltools check.
And xenstored.m4 does not use the result of --disable-ocamltools.
Rearrange the code to check first for the presence of ocaml, then check
--disable-ocamltools and finally decide what sort of xenstored should be
the default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh as requested]
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Doug Goldstein
Ian Campbell
Wei Liu
George Dunlap
Ting-Wei Lan
Roger Pau Monne
Julien Grall
Daniel Kiper
Olaf Hering
Julien Grall
Ian Jackson