Add a new structure remus state, and move concrete layer's private
member to remus state.
it is pure refactoring and no functional changes.
Init interval in libxl__remus_setup(). It is safe to move this initialisation,
because this value is only used for remus, and remus will use this value after
libxl__remus_setup().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently struct libxl__domain_suspend_state contains 2 type of states,
one is save state, another is suspend state. This patch separates those
two out.
The motivation of this is that COLO will need to do suspend/resume
continuously, we need a more common suspend state.
After this change, dss stands for libxl__domain_save_state,
dsps stands for libxl__domain_suspend_state.
Also introduce libxl__domain_suspend_init to initialise the
libxl__domain_suspend_state.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by:Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
HVMlite domains add/remove VCPUs by toggling "availability" property in
xenstore.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The change is simple replace of raw strdup with a libxl variant.
The benefit of that is the libxl variant has the extra
behaviour of abort-on-alloc-fail - and will improve error handling.
libxl_version_info is a bit odd - it is a public function and as libxl.h
mentions - the callers of libxl_ public function needs to call the appropiate
_dispose() function.
"However libxl_get_version_info() is special and returns a cached
result from the ctx which cannot and should not be freed (as evidenced
by it returning a const struct). This data is freed in libxl_ctx_free()
by calling libxl_version_info_dispose(). This is why none of the callers
remember to free -- they shouldn't be doing so." (Ian Campbell)
So the patch makes sure to use the NOGC.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Coverity CID 1343309
Make GC_FREE reachable in all cases in libxl_get_scheduler() by
eliminating the error-path return and instead storing the error code in
the returned variable.
To make this semantically consistent, change the return type of
libxl_get_scheduler() from libxl_scheduler to int, and make a note of
the interpretation of the return value in libxl.h. N.B. This change
does not change the API in a way that affects functionality.
The libxl_scheduler enum is consistent with the sched_id return value
of xc_sched_id and this must continue to be true.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Chester Lin <czylin@uwaterloo.ca>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To more closely follow the guidelines in CODING_STYLE, store the result
of xc_sched_id() in the local variable r, and the check the result of
the call in a separate statement. Change the type of the output
parameter given to xc_sched_id() from libxl_scheduler to int to match
the libxc interface.
Additionally, change the error log statement to more accurately reflect
the failure. This is the only functional change introduced by this
patch.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Chester Lin <czylin@uwaterloo.ca>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Add a "never_stop" flag to dominfo as indicator for the toolstack that
this domain is to be kept running. For now it is being set for xenstore
domain, but there might be other domains in the future.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl_list_vm() is calling xc_domain_getinfolist() today with a limit
of 1024 domains. To avoid open coding a loop around
xc_domain_getinfolist() to avoid the 1024 domain limit just use
libxl_list_domain() instead.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
xl list is currently limited to 1024 domains. Remove the limit.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Replace the firmware loaded into HVM guests with an OS kernel. Since the HVM
builder now uses the PV xc_dom_* set of functions this kernel will be parsed
and loaded inside the guest like on PV, but the container is a pure HVM
guest.
Also, if device_model_version is set to none or a device model for the
specified domain is not present unconditinally set the nic type to
LIBXL_NIC_TYPE_VIF.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
...to denote what it actually does.
The name libxl__xs_write() suggests something taking a buffer and length,
akin to write(2), whereas the semantics of the function are actually more
akin to printf(3).
This patch is a textual substitution of libxl__xs_write with
libxl__xs_printf with some associated formatting fixes.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
The rune used is:
sed -i 's/libxl__sprintf(gc,\s*/GCSPRINTF(/g' libxl*.c
This rune is simple and better than trying to match every possible
patterns.
Two instances in libxl_dm.c need fixing up. They are in fact better to just
use libxl__strdup.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__exec() doesn't ever return. Inform the compiler of this, and
remove all dead code.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
PoD guests need to balloon at least as far as required by PoD, or risk
crashing. Currently they don't necessarily know what the right value
is, because our memory accounting is (at the very least) confusing.
Apply the memory limit fudge factor to the in-hypervisor PoD memory
target, too. This will increase the size of the guest's PoD cache by
the fudge factor LIBXL_MAXMEM_CONSTANT (currently 1Mby). This ensures
that even with a slightly-off balloon driver, the guest will be
stable even under memory pressure.
There are two call sites of xc_domain_set_pod_target that need fixing:
The one in libxl_set_memory_target is straightforward.
The one in xc_hvm_build_x86.c:setup_guest is more awkward. Simply
setting the PoD target differently does not work because the various
amounts of memory during domain construction no longer match up.
Instead, we adjust the guest memory target in xenstore (but only for
PoD guests).
This introduces a 1Mby discrepancy between the balloon target of a PoD
guest at boot, and the target set by an apparently-equivalent `xl
mem-set' (or similar) later. This approach is low-risk for a security
fix but we need to fix this up properly in xen.git#staging and
probably also in stable trees.
This is XSA-153.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
(cherry picked from commit 56fb5fd623)
The spatch provided in previous patch didn't handle all sites that need
transformation.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Use existing create/restore path to perform 'soft reset' for HVM
domains. Tear everything down, e.g. destroy domain's device model,
remove the domain from xenstore, save toolstack record and start
over.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The current flow of the devd helper (in charge of launching hotplug scripts
inside of driver domains) is to wait for the device backend to switch to
state 6 (XenbusStateClosed) and then remove it. This is not correct, since
a domain can reconnect it's PV devices as many times as it wants.
In order to fix this, introduce the following logic: the control domain will
set the "online" backend node to 0 when it wants the driver domain to
disconnect the device, so now the condition applied in devd is that "state"
must be 6 and "online" 0 in order to proceed with the disconnection.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Alex Velazquez <alex.j.velazquez@gmail.com>
Cc: Alex Velazquez <alex.j.velazquez@gmail.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 93f5194e72 "libxl: clear O_NONBLOCK|O_NDELAY on migration fd
and reinstate afterwards" added some logging of fcntl.F_GETFL at all
as %x without a 0x prefix to make it clear they numbers are hex. Fix
this alongwith an inadvertent logging of the fd itself as hex.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The fd passed to us by libvirt for both save and restore has at least
O_NONBLOCK set, which libxl does not expect and therefore fails to
handle any EAGAIN which might arise.
This has been observed with migration v2, but if v1 used to work I
think that would be just be by luck and/or coincidence.
Unix convention (and the principal of least surprise) is usually to
ensure that an fd has no "strange" properties, such as being
non-blocking, when handing it to another component.
However for the convenience of the application arrange instead for
libxl to clear any unexpected flags on the file descriptors it is
given for save or restore and restore them to their original state at
the end. O_NDELAY could be similarly problematic so clear that as
well as O_NONBLOCK.
To do this introduce a pair of new helper functions one to modify+save
the flags and another to restore them and call them in the appropriate
places.
The migration v1 code appeared to do some things with O_NONBLOCK in
the checkpoint case. Migration v2 doesn't seem to do so, and in any
case I wouldn't expect it to be relying on libvirt's setting of
O_NONBLOCK when xl doesn't use that flag.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Cc: Yang Hongyang <yanghy@cn.fujitsu.com>
The operations are to be used by an control domain to set parameters,
list pools, clients, and to be used during migration.
There is no need to have them in the tmem hypercall path.
This patch moves code without adding fixes - and in fact in
some cases makes the parameters soo long that they hurt eyes - but
that is for another patch.
Note that in regards to existing users:
- Only the control domain could call it - which meant that if
a guest called it would get -EPERM, so we are OK there.
In practice no guests called this TMEM_CONTROL command.
- The spec: https://oss.oracle.com/projects/tmem/dist/documentation/api/tmemspec-v001.pdf
mentions: "TBD [Not sure if this is really needed.]"
which is a carte blanche as any to do this!
Note: The XSM check is the same - we just move it from do_tmem_op
to do_sysctl.
We also add an 32-bit pad to make the sysctl structure have the same
exact size under 32 and 64-bit toolstacks and not worry about aligment
issues.
And the XLAT does not need to deal with the buf as it has been
moved to another structure which is 32/64 fixed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jen Beulich <jbeulich@suse.com>
It mentions it but it is never used. The hypercall interface
knows nothing of this sort of thing either. Lets just remove it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com> [release + toolstack]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Document how cpupool_info works. Distinguish success (ERROR_FAIL +
ENOENT) vs failure in libxl_list_cpupool and properly clean up the array
in failure path.
Also switch to libxl__realloc and call libxl_cpupool_{init,dispose}
where appropriate.
There is change of behaviour. Previously if memory allocation fails the
said function returns NULL. Now memory allocation failure is fatal. This
is in line with how we deal with memory allocation failure in other
places in libxl though.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Refactoring Remus setup by introducing libxl__remus_setup API.
All Remus setup work are done in this function.
There is a subtle behavioural change here, which is that if anything
which is now done in _setup fails then the result is a call to
dss->callback( ..,..,ERROR_FAIL) rather than _start returning
AO_CREATE_FAIL(ERROR_FAIL). But this is correct and intended.
Also remove the libxl__ prefix for static functions.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The suspend/save terminology used by libxc is more consistent.
"suspend" refers to quiescing the VM, so pausing qemu, making a
remote_shutdown(SHUTDOWN_suspend) hypercall etc.
"save" refers to the actions involved in actually shuffling the
state of the VM, so xc_domain_save() etc.
libxl currently uses "suspend" to encapsulate both. The patch
Rename libxl__domain_suspend() to libxl__domain_save() since it
actually refers to shuffling the state of the VM.
This results in some strangeness in that some functions called *save*
are now passed a struct called *suspend*, this is temporary and is all
fixed up later by the refactoring of the suspend_state.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Some comments, commit messages:
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
It can happen that an fd is deregistered, and closed, and then a new
fd opened, and reregistered, all while another thread is in poll().
If this happens poll might report POLLNVAL, but the event loop would
think that the fd was supposed to have been valid, and then fail an
assertion:
libxl_event.c:1183: afterpoll_check_fd: Assertion `poller->fds_changed || !(fds[slot].revents & 0x020)' failed.
We can't simply ignore POLLNVAL because if we have bugs which cause
messed-up fds, it is a serious problem which we really need to detect.
Instead, add extra tracking to spot when this possibility arises, and
abort on POLLNVAL if we are sure that it is unexpected.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This makes the code more regular. We are going to want to do some
more work in poller_get and poller_put, which work also wants to be
done for poller_app.
Two very minor functional changes:
* We call malloc an extra time since poller_app is now a pointer
* ERROR_FAIL on poller_get failing for poller_app is generated in
libxl_ctx_init rather than passed through by libxl_poller_init
from libxl__pipe_nonblock.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
They are no longer needed, having been replaced by a daemon for
driverdomains which will run scripts as necessary.
Worse yet, they seem to be broken for script-based block devices, such
as block-iscsi. This wouldn't matter so much if they were never run
by default; but if you run block-attach without having created a
domain, then the appropriate node to disable running udev scripts will
not have been written yet, and the attach will silently fail.
Rather than try to sort out that issue, just remove them entirely.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There are a lot of paths through
libxl__device_disk_local_initiate_attach(), but they all really boil
down to one thing: Can we just access the file directly, or do we need
to attach it?
The requirements for direct access are fairly simple:
* Is this local (as opposed to a driver domain)?
* Is this a raw format (as opposed to cooked)?
* Does this have no scripts associated with it?
If it meets all those requirements, we can access it directly;
otherwise we need to attach it.
This fixes a bug where bootloader execution fails for disks with
hotplug scripts.
This should fix a theoretical bug when using a qdisk backend in a
driver domain. (Not tested.)
Based on a patch by Roger Pau Monne <roger.pau@citrix.com>.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make it log something if the xenstore path does not exist.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v4: New patch in this version of the series.
Provide libxl_ao_abort.
There is machinery to allow an ao to register an interest in abort
requests, using a libxl__ao_abortable.
This API is not currently very functional: requesting abort will
never have any effect.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
v5: Clarify API doc comment re aborting synchronous operations.
v4: Rename from cancel to abort.
Actually record aos on aos_inprogress.
(Report from Koushik Chakravarty at Citrix.)
Do not mark libxl_ao_cancel hidden (!)
Abolish ERROR_NOTIMPLEMENTED from libxl_ao_cancel.
All operations are supposed to support cancellation.
v2: Minor comment improvements
We are going to introduce a new meaning for aborting an ao, so rename
this to avoid confusion.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There is an issue in libxl_set_memory_target whereby the target and
the max mem can get out of sync, this is because the call the
xc_domain_setmaxmem is not tied in any way to the xenstore transaction
which controls updates to the xenstore side of things.
Consider a domain with 1M of RAM (==target and maxmem for the sake of
argument) and two simultaneous calls to libxl_set_memory_target, both
with relative=0 and enforce=1, one with target=3 and the other with
target=5.
target=5 call target=3 call
transaction start
transaction start
write target=5 to xenstore
write target=3 to xenstore
setmaxmem(5)
setmaxmem(3)
transaction commit = success
transaction commit = EAGAIN
At this point maxmem=3 while target=5.
In reality the target=3 case will the retry and eventually (hopefully)
succeed with target=maxmem=3, however the bad state will persist for
some window which is undesirable. On failure other than EAGAIN all
bets are off anyway, but in that case we will likely stick in the bad
state until someone else sets the memory).
To fix this we slightly abuse the userdata lock which is used to
protect updates to the domain's json configuration. Abused because
maxmem is not actually stored in there, but is kept by Xen. However
the lock protects some semantically similar things and is convenient
to use here too.
libxl_domain_setmaxmem also takes the lock, since it reads
memory/target from xenstore before calling xc_domain_setmaxmem there
is a small (but perhaps not very interesting) race there too.
There is on more use of xc_domain_setmaxmem in libxl__build_pre.
However taking a lock around this would be tricky since the xenstore
parts are not done until libxl__build_post. I think this one could be
argued to be OK since the domid is not "public" yet, that is it has
not been returned to the application yet (as the result of the create
operation). Toolstacks which go round fiddling with random domid's
which they find lying on the floor should be taught to do better.
Add a doc note that taking the userdata lock requires the CTX_LOCK to
be held.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This reverts commit 0c029c4da2.
A new memory model that allows QEMU to bump memory behind libxl's back
was merged a few months ago. We didn't fully understand the
repercussions back then. Now it breaks migration and becomes blocker of
4.6 release.
It's better to restore to original behaviour at this stage of the
release cycle, that would put us in a position no worse than before, so
the release is unblocked.
The said function is still racy after reverting these two patches.
Making domain memory state consistent requires a bit more work. Separate
patch(es) will be sent out to deal with that problem.
Fix up conflicts with f5b43e95 (libxl: fix "xl mem-set" regression from
0c029c4da2).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These files are leaked when using qemu-trad stubdom. They are
intermediate files created by libxc. Unfortunately they don't fit well
in our userdata scheme. Clean them up after we destroy all userdata,
we're sure they are not useful anymore at that point.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Wen Congyang
Boris Ostrovsky
Konrad Rzeszutek Wilk
Chester Lin
Ian Campbell
Juergen Gross
Roger Pau Monne
Paul Durrant
Wei Liu
Andrew Cooper
Ian Jackson
Vitaly Kuznetsov
Yang Hongyang
Dario Faggioli
George Dunlap
Jan Beulich