This reverts commit c7d3afbb44 which
broke the libvirt build, since libvirt uses xtl_* and hence needs
updating to link against the new library when necessary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In attempting to disaggregate libxenctrl I found that many of the
pieces were going to want access to this library, so split it out (as
it probably should always have been).
Various build adjustments are needed. In particular things which use
xtl_* themselves now need to explicity link against the library.
This has a nice side effect which is that users of libxl no longer
need to link against libxenctrl just to create a logger, which was
counter to the principal that applications using libxl shouldn't be
required to look behind the curtain. This means that xl no longer
links against libxenctrl.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- Update QEMU_TRADITIONAL_REVISION and MINIOS_UPSTREAM_REVISION ]
The manpage rules are very repetative, because of the section number being
present in the filenames.
Instead of adding another set of 3 rules, switch to using a metarule to
automate the repetative action. New rules for different manpage sections can
be added simply by extending the $(foreach)
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If more than one instance of xenconsole is run against the same DOMID
then each instance will only get some data. This change ensures
exclusive access to the console by obtaining an exclusive lock on
<XEN_LOCK_DIR>/xenconsole.<DOMID>.
The locking strategy used is based on
tools/libxl/libxl_internal.c:libxl__lock_domain_userdata().
Signed-off-by: Martin Lucina <martin@lucina.net>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The removal of the udev rules highlighted that although it has been
replaced by "xl devd" there isn't an initscript to replace it.
To enable this add a --pidfile option to xl devd.
Tested on Linux by running the script in dom0 and checking the daemon
was started/stopped, but not in an actual driver domain environment
since I don't have one conveniently available. I also checked that
running without the --pidfile option still works.
Scripts mainly cribbed from the xencommons for each platform.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This exercises the potential race between fd deregistration and
poll(). (Because we have control of the individual steps, we can do
the whole test in a single thread and ensure that the pessimal order
is always reached.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This merges xenalyze.hg, changeset 150:24308507be1d,
into tools/xentrace/xenalyze.c to have the tool and
public/trace.h in one place.
Adjust code to use public/trace.h instead of private trace.h
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- wrap $(BIN) install in a check in case it is empty (which it
is on !x86, avoid BIN += since it results in BIN = ' ' on
!x86 ]
By generating tools/include/xen-xsm/flask/flask.h using the same tool
as used during the hypervisor build.
Note that this is done regardless of whether XSM is enabled, since we
want the tools to be agnostic to whether or not XSM is enabled in the
hypervisor
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Provide mini-os url and revision in Config.mk
Make stubdom targets depend on mini-os-dir target. Make
subtree-force-update{,-all} depend on mini-os-dir-force-update.
Also make mktarball script generate mini-os archive.
Original mini-os directory is renamed to mini-os-intree to help reduce
patch length. That directory will be deleted in a separate patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
Changes in v3:
1. Put mini-os targets in main Makefile.
2. Stubdom clean and distclean don't depend on mini-os-dir.
Changes in v2:
1. Use hash in Config.mk.
In order to keep the tree bisectable all the changes are done in one
single commit.
Things done in this commit:
1. Import necessary .mk files from Xen.
2. Move all XEN_ related variables to MINIOS_ namespace.
3. Import Xen public header files.
4. Import BSD's list.h and helper script.
Mini-OS's vanilla Config.mk is modified to contain some macros copied
from Xen's Config.mk. It also contains compatibility handling logic for
Xen's stubdom build environment.
Files modified:
Config.mk
Makefile
arch/x86/Makefile
arch/x86/arch.mk
minios.mk
All other files are just imported from Xen.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a check, like the existing check for non-ANSI C in the public
headers, that runs the public headers through a C++ compiler to
flag non-C++-friendly constructs.
Unlike the ANSI C check, we accept GCC-isms (gnu++98), and we also
check various tools-only headers.
Also tidy up the runes for these checks to be a bit more readable.
io/ring.h uses 'private' as a field name, which is a keyword in C++;
this patch doesn't change that. Instead the check works around it.
Reported-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Don Slutz <dslutz@verizon.com>
A pkg-config file for libxl. It also contains two variables
(xenfirmwaredir and libexec_bin) so that tools that are very keen on
knowing the locations of Xen binaries (say, libvirt) can use them to
determine the location of the binaries.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
This moves the EFI boot and runtime services code to the common/efi directory.
This code is symbolicly linked back into the arch/x86/efi directory where it is
built if a build-time check for PE/COFF support in the toolchain passes. In
the PE/COFF supporting case, both the EFI executable and the normal Xen image
(with stubbed EFI functions) are built. We can't use the normal common build
infrastructure since we are building two versions at the same time, with
different EFI related code in each. No code changes, just file movement and
make updates. The files are symbolicly linked at build time back toe the
original arch/x86/efi directory. This is in preparation for adding ARM EFI
support where much of these files can be shared.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
In preparation to remove hardcoded /var/run/xen paths, provide
XEN_RUN_DIR and related directories to xc_private.h. Similar code exists
already for libxl, stubdom and other parts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
This small helper is responsible for generating Dom0 JSON config
stub and writing Dom0 xenstore entries. This helpers subsumes two calls
to xenstore-write in xencommons script.
Dom0 UUID is intentionally left untouched, so it is always all
zeros. This makes sure that we don't leak Dom0 stubs across rebooting.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- folded in incremental patch for *BSD ]
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This moves all generic path variables to a new the config/Paths.mk.in
input source file to be processed at configure time, tons of files use
these so this just share them. This also paves the way to let us
easily dynamically configure these with autoconf, for now we leave the
same presets as was present before.
This work was prompted by looking for an autoconf way to do
replacements for the hotplug global file, while at it I realized
that a few other files use the same variables and have in places
around the tree the same constructs for generating their own
files. This makes use of the old buildmakevars2file() but generalizes
the definition of the paths at configure time and spreads the
new definitions out throughout the build system.
This has no impact on building the hypervisor and extras/mini-os,
you do not need to, and are not expected to, run configure to build
those targets.
While at it lets add some documentation on the for the two files on
the source file, we can expand further details on the wiki [0].
[0] http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Tim Deegan <tim@xen.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
* Remove ignores for removed docs.
* Introduce blanket ignores for the "output" directories, including txt/ which
was previously missing.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This was a C interface to a very early version of the XenAPI, it has not kept
up with developments to the API e.g. in xapi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
Test timeout deregistration idempotency. In the current tree this
test fails because ev->func is not cleared, meaning that a timeout
can be removed from the list more than once, corrupting the list.
It is necessary to use multiple timeouts to demonstrate this bug,
because removing the very same entry twice from a list in quick
succession, without modifying the list in other ways in between,
doesn't actually corrupt the list. (Since removing an entry from a
doubly-linked list just copies next and back from the disappearing
entry into its neighbours.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
It is quite inappropriate to keep a hacked up versions of figlet in our source
tree, especially when the purpose of the hackary is just to provide a text to
octal conversion.
This version of figlet contributes a surprisingly large proportion of the
Coverity issues found under xen/ (and therefore attributed against Xen)
Figlet can be found in all distros, so make use of it. We keep xen.flf (being
the Xen figlet font) and replace the hacked up octal transform with a short
python script.
The Xen Makefile has been tweaked in such a way that it still prints the
figlet banner for the build.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Just a few things which I noticed which I'm sure aren't relevant now. I'm sure
there is plent of other cruft but I didn't do any sort of audit.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Campbell
Wei Liu
Andrew Cooper
Martin Lucina
Ian Jackson
Olaf Hering
Tim Deegan
Daniel Kiper
Roy Franz
Luis R. Rodriguez
Rob Hoes
Dario Faggioli
Julien Grall