INVALID_P2M_ENTRY is defined as (xen_pfn_t)-1 and is often used
according to it's type for an invalid pfn. Change the name of the
macro to INVALID_PFN.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Rename the count_pgtables hook of the domain builder to alloc_pgtables
and do the allocation of the guest memory for page tables inside this
hook. This will remove the need for accessing the x86 specific pgtables
member of struct xc_dom_image in the generic domain builder code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Place the calls to xc_vcpu_setcontext and the allocation of the hypercall
buffer into the arch-specific vcpu hooks. This is needed in order to
introduce a new builder, so x86 HVM guests can initialize the BSP using
XEN_DOMCTL_sethvmcontext instead of XEN_DOMCTL_setvcpucontext.
This patch should not introduce any functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
When creating a guest with more than 3GB of memory, the 2 banks will be
used and the loop with overrunning. The code will fail later on because
Xen will deny to populate the region:
domainbuilder: detail: xc_dom_devicetree_mem: called
domainbuilder: detail: xc_dom_mem_init: mem 3096 MB, pages 0xc1800 pages, 4k each
domainbuilder: detail: xc_dom_mem_init: 0xc1800 pages
domainbuilder: detail: xc_dom_boot_mem_init: called
domainbuilder: detail: set_mode: guest xen-3.0-aarch64, address size 64
domainbuilder: detail: xc_dom_malloc : 14384 kB
domainbuilder: detail: populate_guest_memory: populating RAM @0000000040000000-0000000100000000 (3072MB)
domainbuilder: detail: populate_one_size: populated 0x3/0x3 entries with shift 18
domainbuilder: detail: populate_guest_memory: populating RAM @0000000200000000-0000000201800000 (24MB)
domainbuilder: detail: populate_one_size: populated 0xc/0xc entries with shift 9
domainbuilder: detail: populate_guest_memory: populating RAM @0000007fad41c000-0007fb39dd42c000 (2141954816MB)
domainbuilder: detail: populate_one_size: populated 0x100/0x1e4 entries with shift 0
domainbuilder: detail: populate_guest_memory: Not enough RAM
This is because we are currently accessing the bank before checking the
validity of the index. AFAICT, on Debian Jessie, the compiler (gcc 4.9.2) is
assuming that it's not necessary to verify the index because it's used
before. This is a valid assumption because the operand of && are
execute from from left to right.
Re-order the checks to verify the validity of the index before accessing
the bank.
The problem has been present since the introduction of the multi-bank
feature in commit 45d9867837 " tools: arm:
prepare domain builder for multiple banks of guest RAM".
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Add a new field p2m_size to keep track of the number of pages covered by
p2m. Change total_pages to p2m_size in functions which in fact need
the size of p2m.
This is needed because we are going to ditch the assumption that PV x86
has only one contiguous ram region. Originally the p2m size was always
equal to total_pages, but we will soon change that in later patch.
This patch doesn't change the behaviour of libxc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tries to allocate as many large (1G or 2M) pages as it can to the guest and tries
to align to the next larger size on each attempt so that we can attempt to
allocate even larger pages on the next iteration (this is currently only
exercised via a compile time debug option, which is left in place under a #if
0).
Since ARM page tables are consistent at each level there is a common helper
function which tries to allocate a levels worth of pages. The exception to this
consistency is level 0 which does not support table mappings (0.5TB
superpages!).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
HVMOP_get_param and HVMOP_set_param take a uint32_t for the parameter
index and a uint64_t for the value. So add xc_hvm_param_get() and
xc_hvm_param_set() that take the same types.
The existing xc_get_hvm_param() and xc_set_hvm_param() are retained
for compatibility but are deprecated.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- dropped one hunk against xen-access.c which didn't apply due to
intervening changes ]
xen-hptool and xen-mfndump include xc_private.h. This is bad, but not trivial
to fix, so they gain a protective #undef and a stern comment.
MiniOS leaks ARRAY_SIZE into the libxc namespace as part of a stubdom build.
Therefore, xc_private.h gains an #ifndef until MiniOS is fixed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This required exposing the sizes of the banks determined by the domain builder
up to libxl via xc_dom_image.
Since the domain build needs to know the size of the DTB we create placeholder
nodes for each possible bank and when we finalise the DTB we fill in the ones
which are actually populated and NOP out the rest.
Note that the number of guest RAM banks is still 1 after this change.
Also fixes a coding style violation in
libxl__arch_domain_finalise_hw_description while there.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- minor coding style fix ]
Prepare for adding more banks of guest RAM by renaming a bunch of defines
as RAM0 and replacing variables with arrays and introducing loops.
Also in preparation switch to using GUEST_RAM0_BASE explicitly instead of
implicitly via dom->rambase_pfn (while asserting that they must be the same).
This makes the multiple bank case cleaner (although it looks a bit odd for
now).
GUEST_RAM_BASE is defined as the address of the lowest RAM bank, it is used in
tools/libxl/libxl_dom.c to call xc_dom_rambase_init().
Lastly for now ramsize (total size) and rambank_size[0] (size of first bank)
are the same, but use the appropriate one for each context.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This will help when we have more guest RAM banks.
Mostly code motion of the p2m_host initialisation and allocation loop into the
new function populate_guest_memory, but in addition in the caller we now
initialise the p2m all the INVALID_MFN to handle any holes, although in this
patch we still fill in the entire allocated region.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Because toolstacks (at least libxl) only allow RAM to be specified in 1M
increments these two pages were effectively costing 1M of guest RAM space.
Since these pages don't actually need to live in RAM just move them out.
With this a guest can now use the full 768M of the address space reserved
for RAM. (ok, not that impressive, but it simplifies things later)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
--
v3: make the size of the region explicit.
v2: remove spurious w/s change
tools: arm: make the size of the magic page region explicit
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Due to the layout of the guest physical address space we cannot support more
than 768M of RAM before overrunning the area set aside for the grant table. Due
to the presence of the magic pages at the end of the RAM region guests are
actually limited to 767M.
Catch this case during domain build and fail gracefully instead of obscurely
later on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
314c9815e2 "tools: implement initial ramdisk support for ARM." broke starting
guests with <= 128 MB ram by placing the boot modules (dtb and initrd)
immediately after the kernel in this case, running the risk of them being
overwritten. Instead place the modules at the end of RAM, as the hypervisor
does for dom0.
The hypervisor also falls back to placing things before the kernel as a last
resort before failing, so add that here too.
Tested with the Debian installer initrd and guests of 96MB, 128MB, 256MB and
1GB. All work, also tested with 64MB but the installer doesn't run with so
little RAM (but our placement of the initrd is correct).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
The ramdisk is passed to the kernel as a property in the chosen node of the
device tree. This is somewhat tricky since in order to place the ramdisk and
dtb in ram we first need to know the size of the dtb. So we initially create a
DTB with placeholders for the ramdisk and finalise the value (which doesn't
change the size) once we know where everything is.
Rename libxl__arch_domain_configure to xl__arch_domain_init_hw_description to
better reflect its use and to be consistent with the new
libxl__arch_domain_finalise_hw_description.
The common xc_dom_build_image() function did not support explicit placement of
the ramdisk, instead passing 0 to xc_dom_alloc_segment, meaning "pick
somewhere". This change instead passes ramdisk_seg.vstart. If nothing has set
vstart then it will be zero because the entire dom struct is zeroed on
allocation in xc_dom_allocate(). Therefore there is no change to the behaviour
on x86. This is also consistent with how other segments (kernel, dtb) are
handled.
Furthermore if the ramdisk has been explicitly placed then xc_dom_build_image()
assumes that it is not to be decompressed (since that would muck up the sizings
used on placement).
With all that I'm able to boot a domain using the current Debian Jessie armhf
installer initrd and have it complete successfully.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
[ ijc -- s/itherwise/otherwise and dropped bogus emacs magic change ]
The tools and the hypervisor need to agree on various aspects of the guest
environment, such as interrupt numbers, memory layout, initial register values
for registers which are implementation defined etc. Therefore move the
associated defines into the public interface headers, or create them as
necessary.
This just exposes the current de-facto standard guest layout, which may be
subject to change in the future. This deliberately does not make the guest
layout dynamic since there is currently no need.
These values should not be exposed to guests, they should find these things
out via device tree or should not be relying on implementation defined
defaults.
Various bits of the hypervisor needed to change to configure dom0 with the real
platform values while using the virtual platform configuration for guests.
Arrange for this where appropriate and plumb through as needed.
We also need to expose some 64-bit values (e.g. PSR_GUEST64_INIT) for the
benefit of 32 bit toolstacks building 64 bit guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
A sufficiently malformed input to libxc (such as a malformed input ELF
or other guest-controlled data) might cause one of libxc's malloc() to
fail. In this case we need to make sure we don't dereference or do
pointer arithmetic on the result.
Search for all occurrences of \b(m|c|re)alloc in libxc, and all
functions which call them, and add appropriate error checking where
missing.
This includes the functions xc_dom_malloc*, which now print a message
when they fail so that callers don't have to do so.
The function xc_cpuid_to_str wasn't provided with a sane return value
and has a pretty strange API, which now becomes a little stranger.
There are no in-tree callers.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
v8: Move a check in xc_exchange_page to the previous patch
(ie, remove it from this patch).
v7: Add a missing check for a call to alloc_str.
Add arithmetic overflow check in xc_dom_malloc.
Coding style fix.
v6: Fix a missed call `pfn_err = calloc...' in xc_domain_restore.c.
Fix a missed call `new_pfn = xc_map_foreign_range...' in
xc_offline_page.c
v5: This patch is new in this version of the series.
This is a patch to forward-port a Xend behaviour. Xend writes IO ABI used for
all frontends. Blkfront before 2.6.26 relies on this behaviour otherwise guest
cannot boot when running in 32-on-64 mode. Blkfront after 2.6.26 writes that
node itself, in which case it's just an overwrite to an existing node which
should be OK.
In fact Xend writes the ABI for all frontends including console and vif. But
nowadays only old disk frontends rely on that behaviour so that we only write
the ABI for disk frontends in libxl, minimizing the impact.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
struct cpu_user_regs is currently used as both internal state
(specifically at the base of the stack) and a guest/toolstack
visible API (via struct vcpu_guest_context used by
XEN_DOMCTL_{g,s}etvcpucontext and VCPUOP_initialise).
This causes problems when we want to make the API 64-bit clean since
we don't really want to change the size of the on-stack struct.
So split into vcpu_guest_core_regs which is the API facing struct
and keep cpu_user_regs purely internal, translate between the two.
In the user API arrange for both 64- and 32-bit registers to be
included in a layout which does not differ depending on toolstack
architecture. Also switch to using the more formal banked register
names (e.g. with the _usr suffix) for clarity.
This is an ABI change. Note that the kernel doesn't currently use
this data structure so it affects the tools interface only.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Make xc_dom_feature_translated an arch-dependent function.
alloc_magic_pages: save console and xenstore pfn's in xc_dom_image.
alloc_magic_pages: set HVM_PARAM_CONSOLE_EVTCHN and
HVM_PARAM_STORE_EVTCHN hvm_params using the event channels allocated by
the toolstack.
Call xc_dom_gnttab_hvm_seed instead of xc_dom_gnttab_seed in
xc_dom_gnttab_init for autotranslated guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Allocate two additional pages at the end of the guest physical memory
for xenstore and console.
Set HVM_PARAM_STORE_PFN and HVM_PARAM_CONSOLE_PFN to the corresponding
values.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- pass correct p2m array to populate physmap in
alloc_magic_pages
]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Introduce an empty implementation of the arch specific ARM functions in
xc_dom_arm.c.
Provide empty implementations of xc_domain_save and xc_domain_restore
when CONFIG_MIGRATE is not set.
Move xc_hvm_build.c to xc_hvm_build_x86.c because the implementation is
x86 specific, introduce xc_hvm_build_arm.c with empty stubs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Juergen Gross
Roger Pau Monne
Julien Grall
Ian Campbell
Tamas K Lengyel
Wei Liu
David Vrabel
Andrew Cooper
Ian Jackson
Stefano Stabellini