As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
xen-hptool and xen-mfndump include xc_private.h. This is bad, but not trivial
to fix, so they gain a protective #undef and a stern comment.
MiniOS leaks ARRAY_SIZE into the libxc namespace as part of a stubdom build.
Therefore, xc_private.h gains an #ifndef until MiniOS is fixed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This reverts commit a0035ecc0d.
Even with this fix there is a period between the flush and the unmap where
processor may speculate data into the cache. The solution is to map this
region uncached or to use the HCR.DC bit to mark all guest accesses cached.
89eb02c220 "xen: arm: force guest memory accesses to cacheable when MMU is
disabled" has arranged to do the latter.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
On ARM guest OSes are started with MMU and Caches disables (as they are on
native) however caching is enabled in the domain running the builder and
therefore we must flush the cache as we load the blobs, otherwise when the
guest starts running it may not see them. The dom0 build in the hypervisor has
the same requirements and already does the right thing.
The mechanism for performing a cache flush from userspace is OS specific, so
implement this as a new osdep hook:
- On 32-bit ARM Linux provides a system call to flush the cache.
- On 64-bit ARM Linux the processor is configured to allow cache flushes
directly from userspace.
- Non-Linux platforms will need to provide their own implementation. If
similar mechanisms are not available then a new privcmd ioctl should be a
suitable alternative.
No cache maintenance is required on x86, so provide a stub for all non-Linux
platforms which returns success on x86 only and log an error otherwise.
This fixes guest building on Xgene which has a very large L3 cache and so is
particularly susceptible to this problem. It has also been observed
sporadically on midway.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Andre Przywara <andre.przywara@calxeda.com>
Cc: Pranavkumar Sawargaonkar <psawargaonkar@apm.com>
Cc: Anup Patel <apatel@apm.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Move (page aligned) buffer allocations in {os}_privcmd_alloc_hypercall_buffer
into a global function xc_memalign. This API is also used by Remus
compression code to allocate compression caches that need to be page aligned.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Brendan Cully <brendan@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Normally, when a userspace process mapping a grant crashes, the domain
providing the reference receives no indication that its peer has
crashed, possibly leading to unexpected freezes or timeouts. This
function provides a notification of the unmap by signalling an event
channel and/or clearing a specific byte in the page.
This also unifies the 3 very similar grant-mapping osdep interfaces into
a single function instead of introducing yet another minor variation.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This will allow us to use OS specific interfaces to ensure that the
allocated memory is safe for use as a hypercall buffer in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Transition to xc_osdep_handle is now complete and nothing uses
(or should be using) it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
i.e. not running on a real hypervisor
Allows users of the library to adjust behaviour. I don't especially
like this violation of the abstraction but both oxenstored and xapi
use this to avoid difficult to simulate operations when running on the
simulator.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
do_privcmd() was only ever used by do_xen_hypercall() so remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
This patch introduces the basic infrastructure and uses it for open
and close operations on privcmd, evtchn and gnttab devices.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The xc_interface previously passed to xc_gnttab_* was only used for
logging which can now be done via the xc_gnttab handle instead.
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also update QEMU_TAG to pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
They simply make hypercalls and perform other operations via the
abstract interface. Create xc_gnttab.c and move those functions there.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Having minios close() call back into the libxc core close routines is
backwards and unexpected. On every other OS the libxc core close
routine calls close().
Export minios specific functions from the minios libxc code to
implement fd closing for each type of xc file handle and simply call
close() in the core close routine.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In order to do so it modifies map_frames_ex and do_map_frames to take
an int *err as parameter and return any error that way.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
As part of making stubdom usable on NetBSD, it is necessary to
restructure the minios headers to avoid conflicts with NetBSD's
crossbuild toolchain.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* Uninitialized dev_bus_addr argument to GNTTABOP_unmap_grant_ref
results in an angry hypervisor.
* Set errno in libxc and return -1 on error.
* op.status is a int16_t, so it should be printed with PRId16.
* Don't print domids[0] or refs[0] if the ptr is NULL. It's more
polite to crash later, after the message has been printed.
Signed-off-by: Diego Ongaro <diego.ongaro@citrix.com>
I've implemented a grant map for mini-os to support the xc_gnttab_*()
functions, the equivalent of gntdev in linux. This is useful for my
work in putting xenstored in a stub domain.
Signed-off-by: Diego Ongaro <diego.ongaro@citrix.com>
The current implementation in minios of xc_evtchn_pending doesn't set
read=0 when there is exactly one port pending. This resulted in
select() incorrectly reporting the file descriptor as ready.
Signed-off-by: Diego Ongaro <diego.ongaro@citrix.com>
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Also get rid of va and npages members of privcmd_mmap_entry since we
do not need them any more.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Ian Campbell
Andrew Cooper
Olaf Hering
David Vrabel
Alex Zeffertt
Shriram Rajagopalan
Daniel De Graaf
Keir Fraser
Keir Fraser