...to denote what it actually does.
The name libxl__xs_write() suggests something taking a buffer and length,
akin to write(2), whereas the semantics of the function are actually more
akin to printf(3).
This patch is a textual substitution of libxl__xs_write with
libxl__xs_printf with some associated formatting fixes.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Since XSA-131 qemu-xen now restricts access to PCI cfg by default. In
order to allow local configuration of the existing libxl_device_pci
"permissive" flag needs to be plumbed through via the new QMP property
added by the XSA-131 patches.
Versions of QEMU prior to XSA-131 did not support this permissive
property, so we only pass it if it is true. Older versions only
supported permissive mode.
qemu-xen-traditional already supports the permissive mode setting via
xenstore.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Now that Xen uses qdisks by default and qemu does not write out
statistics to sysfs this patch queries the QMP for disk statistics.
This patch depends on libyajl for parsing statistics returned from
QMP. The runtime requires libyajl 2.0.3 or newer for required bug
fixes in yajl_tree_parse().
Libxl is modified to create a new socket dedicated for the use of
libxenstat for querying the block statistics using QMP.
The current APIs remain unchanged. It works within the existing
framework of libxenstat.
Signed-off-by: Charles Arnold <carnold@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... instead of open-coding them or not using them at all. This in
particular fixes a build (and presumably also runtime) problem on old
enough libc due to the recent introduction of a use of O_CLOEXEC. The
other two changes are only of cleanup kind.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the JSON message contains more bytes than QMP_RECEIVE_BUFFER_SIZE,
this bug will break down the heap, that leads to core dump. One more
byte should be allocated to contain the appended null character.
Signed-off-by: Li Liang <liangx.z.li@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
The convenience macro GCSPRINTF has been written to be used in place of
libxl_sprintf. Change all calls to libxl_sprintf() in libxl_qmp.c to
invocations of the new macro.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
Coding style has recently been changed for libxl. The convenience
macro LOGE() has been introduced, and invocations of the old macro
LIBXL__LOG_ERROR() are to be replaced with it. Change all occurences
of the old macro (in functions that have a local libxl_gc *gc) except
the one in register_serials_chardev_callback() to the new one. (This
function lacks a local libxl__gc *gc, which LOGE() requires.)
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coding style has recently been changed for libxl. The convenience
macro LOG() has been introduced, and invocations of the old macro
LIBXL__LOG() are to be replaced with it. Change occurences of the
old macro to the new one in the functions qmp_handle_response()
and qmp_handle_error_response(). The new macros need access to a
local libxl__gc *gc, so add it as a parameter to both these functions,
and pass the instance in qmp_next() down the call chain to
qmp_handle_response() and in turn to qmp_handle_error_response().
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[ijc -- reverted one unintential w/s change]
The new coding style uses the convenience macro GCNEW as declared in
libxl_internal.h. Substitute an invocation of this macro for its
body at the one place it occurs in libxl_qmp.c.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The new coding style uses the convenience macro CTX as declared in
libxl_internal.h. Substitute an invocation of this macro for its body
at the one place it occurs in libxl_qmp.c.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update qmp_send() in libxl_qmp.c to use the new convenience macros
declared in libxl_internal.h. Uses GC_INIT at the top of the function,
and GC_FREE at the exit. Since GC_INIT returns a libxl__gc by reference
and not by value, remove the address operator from the left of the
variable gc where it is passed as a parameter.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
Coding style has recently been changed for libxl. The convenience macro
LOG() has been introduced, and it is intended that it calls to the old
macro LIBXL__LOG() be replaced with it. Change 7 occurences of the old
macro (in functions that have a local libxl_gc *gc) to the new one.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditional and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.
The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.
We have two qemu patches one xl patch to fix the HVM S3 bug:
This patch is the xl patch. It invokes QMP system_wakeup so that
qemu logic for hvm s3 could be triggered.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Patch generated by the following semantic patch
(http://coccinelle.lip6.fr/):
@@
expression *P;
@@
- if(P) free(P);
+ free(P);
...and then by filtering through the following command:
filterdiff -p1 -x 'stubdom/*' -x 'tools/firmware/*' -x 'tools/qemu-*' -x 'tools/blktap*'
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
gcc 4.8 identifies several places where code of the form memset(x, 0,
sizeof(x)); is used incorrectly, meaning that less memory is set to
zero than required.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Keir Fraser <keir@xen.org>
Those functions will be used to create a "list" of parameters that
contain more than just strings. This list is converted by qmp_send to
a string to be sent to QEMU.
Those functions will be used in the next two patches, so right now
there are not compiled.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch makes the flexarray function libxl__gc aware.
It also updates every function that use a flexarray to pass the gc and removes
every memory allocation check and free.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It was convenient to invent $(CFLAGS_LIBXL) to do this.
Various renamings to avoid shadowing standard functions:
- index(3)
- listen(2)
- link(2)
- abort(3)
- abs(3)
Reduced the scope of some variables to avoid conflicts.
Change to libxc is due to the nested hypercall buf macros in
set_xen_guest_handle (used in libxl) using the same local private vars.
Build tested only.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Implement QMP stop and resume functionality and split
device model save into 3 parts:
suspend_dm(domid)
save_dm(domid, fd)
resume_dm(domid)
Integrate Device model suspend into suspend_common_callback
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Following the recent changes to upstream Qemu, the best monitor command
to suit or needs is "xen-save-devices-state" rather than "migrate".
This patch removes libxl__qmp_migrate and introduces libxl__qmp_save
instead, that uses "xen-save-devices-state".
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Only libxl_xen_config_dir_path and libxl_lock_dir_path are used outside the
library. Also bindir, sbindir, sharedir and xenpagingdir appeared to be
completely unused so nuke them.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently `xl vncviewer $dom` does not work because the VNC port is not
registered in xenstore when using qemu-upstream. This patch attempted to fix
this.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch provide the code to set the VNC password to QEMU upstream through
VNC. The password is still stored in xenstore but will not be used by QEMU
upstream.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This make things a bit easier.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
When read() return 0, the current code just tries again. But this
leads to an infinite loop if QEMU died too soon.
Also, retry select if a signal was caught.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds support for yajl versions 2.x, while retaining 1.x
compatibility. All the needed ifdefs can be found in libxl_json.h.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
qmp_next doesn't handle multiple lines read together in a single
buffer correctly at the moment. This patch fixes it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
We want a function for setting fds to nonblocking, so introduce one.
This is a very similar requirement to that for libxl_fd_set_cloexec,
so make it common with that.
While we're at it, fix a few deficiences that make this latter
function less desirable than it could be:
* Change the return from 0/-1 (like a syscall) to a libxl error code
* Take a boolean parameter for turning the flag on and off
* Log on error (and so, take a ctx for this purpose)
Change callers of libxl_fd_set_cloexec to notice errors. (Although,
such errors are highly unlikely.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Move a lot of
#include <stdfoo.h>
from individual files into libxl_internal.h. This helps avoid
portability mistakes where necessary system headers are omitted from
individual files, and is also of course a convenience when developing.
Also add
#include "libxl_osdeps.h" /* must come before any other headers */
to the top of most libxl*.c files, so that anyone who adds any headers
before libxl_internal.h will put the in the right place.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Previously LIBXL_INIT_GC was an initialiser, which you were expected
to use like this:
libxl__gc gc = LIBXL_INIT_GC(ctx);
But we are going to want to put things in the gc which are to be
initialised using other macros. That means that LIBXL_INIT_GC has to
become a statement too. So instead, we make it so that it's used like this:
libxl_gc gc;
LIBXL_INIT_GC(gc,ctx);
In fact there are only a couple of callers now,
including GC_INIT which uses this trick:
libxl_gc gc[1];
LIBXL_INIT_GC(gc[0],ctx);
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Replace
libxl__gc gc = LIBXL_INIT_GC(ctx);
...
libxl__free_all(&gc);
with
GC_INIT(ctx);
...
GC_FREE;
throughout with a couple of perl runes.
We must then adjust uses of the resulting gc for pointerness, which is
mostly just replacing all occurrences of "&gc" with "gc". Also a
couple of unusual uses of LIBXL_INIT_GC needed to be fixed up by hand.
Here are those runes:
perl -i -pe 's/\Q libxl__gc gc = LIBXL_INIT_GC(ctx);/ GC_INIT(ctx);/' tools/libxl/*.c
perl -i -pe 's/\Q libxl__free_all(&gc);/ GC_FREE;/' tools/libxl/*.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
libxl_internal.h now #includes libxl.h and various system headers.
This
1. makes the order of header inclusion more predictable
2. explicitly allows libxl_internal.h to use objects defined in libxl.h
3. removes the need for individual files to include these headers
Also
- remove some unnecessary #includes of libxl_utils.h,
flexarray.h, etc. in some libxl*.c files,
- include libxl_osdeps.h at the top of libxl_internal.h
- add missing includes of libxl_osdeps.h to a couple of files
- change libxl.h to libxl_internal.h in a couple of files
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This command works in two steps. First, a fd is sent to QEMU through the QMP
socket. And then, the second command "migrate" use the fd previously sent to
ask QEMU to save its states.
This comes with an alternative qmp_send function that can send a fd.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This patch prepares for the next patch, that will introduce an
alternative send function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
At restore time, the file descriptor opened on the migration state file is
still open in the device model. Let's apply FD_CLOEXEC to it.
This patch provides libxl_fd_set_cloexec to users of libxl, instead of keeping
this function internal.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This function insert a PCI passthrough device in qemu.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Paul Durrant
Ian Campbell
Wei Liu
Charles Arnold
Pramod Devendra
Jan Beulich
Li Liang
Kelley Nielsen
Liu Jinsong
Matthew Daley
Anthony PERARD
Michael Young
Shriram Rajagopalan
Stefano Stabellini
Olaf Hering
Roger Pau Monne
Ian Jackson
Keir Fraser