BIOS. Current Xen hard coded VGA ROM at 0xC0000 and etherboot ROM
at 0xD0000. This makes the space in [0xC0000 - 0xDFFFF] to be
fragments, which makes it hard to find enough space to hold another
Option ROM.
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
A minimal implementation of the Viridian (Hyper-V) guest
interface. The only enlightenments advertised and supported are vAPIC
MSRs and long-spin-wait notifications. The set of enlightenments can
easily be extended in future, as they are found to provide a
performance win, and configured via an extended HVM_PARAM_VIRIDIAN hvm
parameter.
Signed-off-by: Peter Johnston <peter.johnston@citrix.com>
Signed-off-by: Tim Deegan <tim.deegan@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This reports more than one memory device if the memory for the guest
is larger than 16G.
Signed-off-by: Bill Rieske <brieske@novell.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Device model is not present in external qemu repository, and
functionality was never exposed through the toolstack.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
When creating an HVM domain, if e.g. another domain is created before
qemu allocates video memory, the extra 8MB memory ballooning is not
available any more, because it got consumed by the other domain.
This fixes it by taking video memory from the main memory:
- make hvmloader use e820_malloc to reserve some of the main memory
and notify ioemu of its address through the Xen platform PCI card.
- add XENMAPSPACE_mfn to the xen_add_to_physmap memory op, to allow
ioemu to move the MFNs between the original position and the PCI
mapping, when LFB acceleration is disabled/enabled
- add a remove_from_physmap memory op, to allow ioemu to unmap it
completely for the case of old guests with acceleration disabled.
- add xc_domain_memory_translate_gpfn_list to libxc to allow ioemu to
get the MFNs of the video memory.
- have xend save the PCI memory space instead of ioemu: if a memory
page is there, the guest can access it like usual memory, so xend
can safely be responsible to save it. The extra benefit is that
live migration will apply the logdirty optimization there too.
- handle old saved images, populating the video memory from ioemu if
really needed.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
pass for the HVM guest to successfully boot.
Currently only one test (REP INS across page boundaries) but more will
be added in future.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
OSPM (particularly the S3 firmware_waking_vector).
TODO: rombios must enter protected mode to fetch the vector on S3 resume.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
really *is* writable in that region. This is almost enough to get S3
working again (read-only firmware-waking-vector is still a problem).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/vgabios
co vgabios
Patchs backported:
- vgabios: Support VESA power management extensions. (cs 17692)
- x86, hvm: Allow Cirrus VGA BIOS to clear framebuffer with minimal
PIO writes. (cs 16242)
This patch fixes the bug with the IDR boot CD.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Through recent additions to the rombios the code section of the post
function has filled up considerably. When I enable the BX_TCGBIOS
compile time option the BIOS crashes since the post section code
(starts at $e05b) spills over into the nmi entry point (starts at
$e2c3). as86 doesn't cause an error when building.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
On AMD cpus, HVM S3 resume was hanging in the bios when trying
to load the x_firmware_waking_vector from absolute
address 0xEA01C (that is, a segment offset greater than 64kB).
This change also now uses 20-bits (instead of 16) from the FACS
standard firmware_waking_vector.
Signed-off-by: Juergen Keil <jk@tools.de>
F10 to select boot device. This will be rarely used, and it is
possible to hit F10 before the message is displayed and the keypress
will still register. So in practice it is quite possibel to use this
boot feature reliably without needing a multi-second delay.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
* Cleanly define a scratch area for temporary storage
* Raise Etherboot ROM out of the way of larger VGA BIOSes
Also detect virtual VGA adaptors more cleanly.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
- add S3 package in ACPI DSDT table. Guest OS will get S3 value from
this package and write the value to PM1A control register to
trigger S3 suspend.
- Add S3 resume logic in rombios post code. the CMOS shutdown register
is used to indicate if this is a S3 resume.
- if it is s3 resume, rombios will get wakeup vector from ACPI FACS
table and jump to wakeup vector. Per ACPI spec, the wakeup vector
jumping must be the forms CS:IP, in which CS=3D(wakeup vector>>4)
IP=3D(wakeup vector)&0xF, for example, for vector=3D0x12345,
CS:IP=3D0x1234:0x5
Note: clobber_entry_point will clobber the post entry, which make S3
resume not work. We will directly jmp to POST Entry if it in S3
Resume path.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Ke Liping <liping.ke@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
- Move MTRR MSR initialisation into hvmloader.
- Simplify initialisation logic by overlaying UC on default WB rather
than vice versa.
- Clean up hypervisor HVM MTRR/PAE code's interface with rest of
hypervisor.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In particular:
- BIOS release date
- BIOS characteristics
- BIOS extended characteristics (Targeted Content Distribution is
required to be specified to pass WHQL).
- CPU speed
Based on a patch by Kamala Narasimhan <kamala.narasimhan@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Some versions of Windows 2000 only support no more than 15 cpus in
ACPI table, otherwise it will cause a BSOD
KMODE_EXCEPTION_NOT_HANDLED. This patch decrease the cpu count in the
ACPI DSDT to 15.
Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
At the same time, fix the ACPI processor IDs in the Processor objects.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Keir Fraser