Prevent the assembler from creating a .note.gnu.property section on
the output objects, as it's not useful for firmware related binaries,
and breaks the resulting rombios image.
This requires modifying the cc-option Makefile macro so it can test
assembler options (by replacing the usage of the -S flag with -c) and
also stripping the -Wa, prefix if present when checking for the test
output.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e270af9428
master date: 2022-04-04 12:30:07 +0100
I've observed this failed assertion:
libxl_event.c:2057: libxl__ao_inprogress_gc: Assertion `ao' failed.
AFAICT, this is happening in qmp_proxy_spawn_outcome where
sdss->qmp_proxy_spawn.ao is NULL.
The out label of spawn_stub_launch_dm() calls qmp_proxy_spawn_outcome(),
but it is only in the success path that sdss->qmp_proxy_spawn.ao gets
set to the current ao.
qmp_proxy_spawn_outcome() should instead use sdss->dm.spawn.ao, which is
the already in-use ao when spawn_stub_launch_dm() is called. The same
is true for spawn_qmp_proxy().
With this, move sdss->qmp_proxy_spawn.ao initialization to
spawn_qmp_proxy() since its use is for libxl__spawn_spawn() and it can
be initialized along with the rest of sdss->qmp_proxy_spawn.
Fixes: 83c845033d ("libxl: use vchan for QMP access with Linux stubdomain")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: d62a34423a
master date: 2022-04-01 17:01:57 +0100
If domain_soft_reset_cb can't rename the save file, it doesn't call
initiate_domain_create() and calls domcreate_complete().
Skipping initiate_domain_create() means dcs->console_wait is
uninitialized and all 0s.
We have:
domcreate_complete()
libxl__xswait_stop()
libxl__ev_xswatch_deregister().
The uninitialized slotnum 0 is considered valid (-1 is the invalid
sentinel), so the NULL pointer path to passed to xs_unwatch() which
segfaults.
libxl__ev_xswatch_deregister:watch w=0x12bc250 wpath=(null) token=0/0: deregister slotnum=0
Move dcs->console_xswait initialization into the callers of
initiate_domain_create, do_domain_create() and do_domain_soft_reset(),
so it is initialized along with the other dcs state.
Fixes: c57e6ebd8c ("(lib)xl: soft reset support")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: d2ecf97f91
master date: 2022-04-01 17:01:57 +0100
commit babde47a3f "introduce a 'passthrough' configuration option to
xl.cfg..." moved the pci list parsing ahead of the global pci option
parsing. This broke the global pci configuration options since they
need to be set first so that looping over the pci devices assigns their
values.
Move the global pci options ahead of the pci list to restore their
function.
Fixes: babde47a3f ("introduce a 'passthrough' configuration option to xl.cfg...")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: e45ad0b1b0
master date: 2022-03-31 19:48:12 +0100
Prevent libxl from creating guests that attempts to use PoD together
with an IOMMU, even if no devices are actually assigned.
While the hypervisor could support using PoD together with an IOMMU as
long as no devices are assigned, such usage seems doubtful. There's no
guarantee the guest has PoD no longer be active, and thus a later
assignment of a PCI device to such domain could fail.
Preventing the usage of PoD together with an IOMMU at guest creation
avoids having to add checks for active PoD entries in the device
assignment paths.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: 07449ecfa4
master date: 2022-02-18 09:03:08 +0100
The size of the video memory of PVH guests should be set to 0 in case
no value has been specified.
Doing not so will leave it to be -1, resulting in an additional 1 kB
of RAM being advertised in the memory map (here the output of a PVH
Mini-OS boot with 16 MB of RAM assigned):
Memory map:
000000000000-0000010003ff: RAM
0000feff8000-0000feffffff: Reserved
0000fc008000-0000fc00803f: ACPI
0000fc000000-0000fc000fff: ACPI
0000fc001000-0000fc007fff: ACPI
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: 0a20a53df1
master date: 2021-12-09 16:26:29 +0000
The memory allocator currently calculates alignment in libxl's virtual
address space, rather than guest physical address space. This results
in the FACS being commonly misaligned.
Furthermore, the allocator has several other bugs.
The opencoded align-up calculation is currently susceptible to a bug
that occurs in the corner case that the buffer is already aligned to
begin with. In that case, an align-sized memory hole is introduced.
The while loop is dead logic because its effects are entirely and
unconditionally overwritten immediately after it.
Rework the memory allocator to align in guest physical address space
instead of libxl's virtual memory and improve the calculation, drop
errant extra page in allocated buffer for ACPI tables, and give some
of the variables better names/types.
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Signed-off-by: Kevin Stefanov <kevin.stefanov@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
master commit: dd6c062a7a
master date: 2021-09-24 11:07:50 +0100
The Feb 2022 microcode from Intel retrofits AMD's MSR_SPEC_CTRL.PSFD interface
to Sunny Cove (IceLake) and later cores.
Update the MSR_SPEC_CTRL emulation, and expose it to guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 52ce1c9784)
While in principle it would be nice to keep leaf 7 in order, that would
involve having an extra 5 words of zeros in a featureset.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit f3709b15fc)
AMD Milan (Zen3) CPUs have an LFENCE Always Serialising CPUID bit in
leaf 80000021.eax. Previous AMD versions used to have a user settable
bit in DE_CFG MSR to select whether LFENCE was dispatch serialising,
which Xen always attempts to set. The forcefully always on setting is
due to the addition of SEV-SNP so that a VMM cannot break the
confidentiality of a guest.
In order to support this new CPUID bit move the LFENCE_DISPATCH
synthetic CPUID bit to map the hardware bit (leaving a hole in the
synthetic range) and either rely on the bit already being set by the
native CPUID output, or attempt to fake it in Xen by modifying the
DE_CFG MSR. This requires adding one more entry to the featureset to
support leaf 80000021.eax.
The bit is always exposed to guests by default even if the underlying
hardware doesn't support leaf 80000021. Note that Xen doesn't allow
guests to change the DE_CFG value, so once set by Xen LFENCE will always
be serialising.
Note that the access to DE_CFG by guests is left as-is: reads will
unconditionally return LFENCE_SERIALISE bit set, while writes are
silently dropped.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Always expose to guests by default]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit e9b4fe2636)
x86/cpuid: do not expand max leaves on restore
When restoring limit the maximum leaves to the ones supported by Xen
4.12 in order to not expand the maximum leaves a guests sees. Note
this is unlikely to cause real issues.
Guests restored from Xen versions 4.13 or greater will contain CPUID
data on the stream that will override the values set by
xc_cpuid_apply_policy.
Fixes: e9b4fe2636 ("x86/cpuid: support LFENCE always serialising CPUID bit")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 111c8c33a8)
tools/libxenguest: Fix max_extd_leaf calculation for legacy restore
0x1c is lower than any value which will actually be observed in
p->extd.max_leaf, but higher than the logical 9 leaves worth of extended data
on Intel systems, causing x86_cpuid_copy_to_buffer() to fail with -ENOBUFS.
Correct the calculation.
The problem was first noticed in c/s 34990446ca "libxl: don't ignore the
return value from xc_cpuid_apply_policy" but introduced earlier.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 5fa174cbf5)
tools/guest: Fix comment regarding CPUID compatibility
It was Xen 4.14 where CPUID data was added to the migration stream, and 4.13
that we need to worry about with regards to compatibility. Xen 4.12 isn't
relevant.
Expand and correct the commentary.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 820cc39343)
This reverts commit c22bd567ce.
While its description is correct from an abstract or real hardware pov,
the range is special inside HVM guests. The range being UC in particular
gets in the way of OVMF, which places itself at [FFE00000,FFFFFFFF].
While this is benign to epte_get_entry_emt() as long as the IOMMU isn't
enabled for a guest, it becomes a very noticable problem otherwise: It
takes about half a minute for OVMF to decompress itself into its
designated address range.
And even beyond OVMF there's no reason to have e.g. the ACPI memory
range marked UC.
Fixes: c22bd567ce ("hvmloader: PA range 0xfc000000-0xffffffff should be UC")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ea187c0b7a
master date: 2021-12-17 08:56:15 +0100
TSXLDTRK lives in CPUID leaf 7[0].edx, not 7[0].ecx.
Bit 16 in ecx is LA57.
Fixes: a6d1b55847 ("x86emul: support X{SUS,RES}LDTRK")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 249e0f1d8f
master date: 2021-12-14 12:30:48 +0000
There is a step change in speculation protections between the Zen1 and Zen2
microarchitectures.
Zen1 and older have no special support. Control bits in non-architectural
MSRs are used to make lfence be dispatch-serialising (Spectre v1), and to
disable Memory Disambiguation (Speculative Store Bypass). IBPB was
retrofitted in a microcode update, and software methods are required for
Spectre v2 protections.
Because the bit controlling Memory Disambiguation is model specific,
hypervisors are expected to expose a MSR_VIRT_SPEC_CTRL interface which
abstracts the model specific details.
Zen2 and later implement the MSR_SPEC_CTRL interface in hardware, and
virtualise the interface for HVM guests to use. A number of hint bits are
specified too to help guide OS software to the most efficient mitigation
strategy.
Zen3 introduced a new feature, Predictive Store Forwarding, along with a
control to disable it in sensitive code.
Add CPUID and VMCB details for all the new functionality.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 747424c664
master date: 2021-09-08 14:16:19 +0100
A platform introduced in EDK II named OvmfXen is now the one to use for
Xen instead of OvmfX64. It comes with PVH support.
Also, the Xen support in OvmfX64 is deprecated,
"deprecation notice: *dynamic* multi-VMM (QEMU vs. Xen) support in OvmfPkg"
https://edk2.groups.io/g/devel/message/75498
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
(cherry picked from commit aad7b5c11d)
(cherry picked from commit 7988ef515a5eabe74bb5468c8c692e03ee9db8bc)
Using the first element of a tuple for a format specifier fails with
python3.4 as included in SLE12:
b = b"string/%x" % (i, )
TypeError: unsupported operand type(s) for %: 'bytes' and 'tuple'
It happens to work with python 2.7 and 3.6.
To support older Py3, format as strings and explicitly encode as ASCII.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
(cherry picked from commit a27976a108)
The trailing member name[] in libxl__physmap_info is written as a
cstring into the stream. The current code does a sanity check if the
last byte is zero. This attempt fails with python3 because name[-1]
returns a type int. As a result the comparison with byte(\00) fails:
File "/usr/lib/xen/bin/convert-legacy-stream", line 347, in read_libxl_toolstack
raise StreamError("physmap name not NUL terminated")
StreamError: physmap name not NUL terminated
To handle both python variants, cast to bytearray().
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
(cherry picked from commit c8f88810db)
A single slash gives a float, a double slash gives an int.
bitmap = unpack_exact("Q" * ((max_id/64) + 1))
TypeError: can't multiply sequence by non-int of type 'float'
Use future division to remain compatible with python 2.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 74d044d51b)
Commit cf8c4d3d13 made some preparation to have one day
variable-length-array argument, but didn't declare the array in the
function prototype the same way as in the function definition. And now
GCC 11 complains about it.
Fixes: cf8c4d3d13 ("tools/libs/foreignmemory: pull array length argument to map forward")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 5d3e4ebb5c
master date: 2021-06-15 18:07:58 +0100
Before python 2.7, str.format() calls required that the format fields
were explicitly enumerated, e.g.:
'{0} {1}'.format(foo, bar)
vs.
'{} {}'.format(foo, bar)
Currently, gengotypes.py uses the latter pattern everywhere, which means
the Go bindings do not build on python 2.6. Use the 2.6 syntax for
format() in order to support python 2.6 for now.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
(cherry picked from commit 6d49fbdeab)
The June 2021 microcode is formally de-featuring TSX on the older Skylake
client CPUs. The workaround from the March 2019 microcode is being dropped,
and replaced with additions to MSR_TSX_FORCE_ABORT to hide the HLE/RTM CPUID
bits.
With this microcode in place, TSX is disabled by default on these CPUs.
Backwards compatibility is provided in the same way as for TAA - RTM force
aborts, rather than suffering #UD, and the CPUID bits can be hidden to recover
performance.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3e09045991)
The TAA mitigation offered the option to hide the HLE and RTM CPUID bits,
which has caused some migration compatibility problems.
These two bits are special. Annotate them with ! to emphasise this point.
Hardware Lock Elision (HLE) may or may not be visible in CPUID, but is
disabled in microcode on all CPUs, and has been removed from the architecture.
Do not advertise it to VMs by default.
Restricted Transactional Memory (RTM) may or may not be visible in CPUID, and
may or may not be configured in force-abort mode. Have tsx_init() note
whether RTM has been configured into force-abort mode, so
guest_common_feature_adjustments() can conditionally hide it from VMs by
default.
The host policy values for HLE/RTM may or may not be set, depending on any
previous running kernel's choice of visibility, and Xen's choice. TSX is
available on any CPU which enumerates a TSX-hiding mechanism, so instead of
doing a two-step to clobber any hiding, scan CPUID, then set the visibility,
just force visibility of the bits in the first place.
With the HLE/RTM bits now unilaterally visible in the host policy,
xc_cpuid_apply_policy() can construct a more appropriate policy out of thin
air for pre-4.13 VMs with no CPUID data in their migration stream, and
specifically one where HLE/RTM doesn't potentially disappear behind the back
of a running VM.
Fixes: 8c4330818f ("x86/spec-ctrl: Mitigate the TSX Asynchronous Abort sidechannel")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 8fe24090d9
master date: 2021-05-27 19:34:00 +0100
Gcc 11 looks to make incorrect assumptions about valid ranges that
pointers may be used for addressing when they are derived from e.g. a
plain constant. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100680.
Utilize RELOC_HIDE() to work around the issue, which for x86 manifests
in at least
- mpparse.c:efi_check_config(),
- tboot.c:tboot_probe(),
- tboot.c:tboot_gen_frametable_integrity(),
- x86_emulate.c:x86_emulate() (at -O2 only).
The last case is particularly odd not just because it only triggers at
higher optimization levels, but also because it only affects one of at
least three similar constructs. Various "note" diagnostics claim the
valid index range to be [0, 2⁶³-1].
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 722f59d38c
master date: 2021-05-27 14:40:29 +0200
All of the sudden, besides .text and .rodata and alike, an always
present .note.gnu.property section has appeared. This section, when
converting to binary format output, gets placed according to its
linked address, causing the resulting blobs to be about 128Mb in size.
The resulting headers with a C representation of the binary blobs then
are, of course all a multiple of that size (and take accordingly long
to create). I didn't bother waiting to see what size the final
test_x86_emulator binary then would have had.
See also https://sourceware.org/bugzilla/show_bug.cgi?id=27753.
Rather than figuring out whether gas supports -mx86-used-note=, simply
remove the section while creating *.bin.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: aa803ba38a
master date: 2021-05-17 15:41:28 +0200
Due to how set_write_lowpath was used here it didn't detect create/delete
conflicts. When we create an entry we must mark our parent as modified
(this is what creating a new node via write does).
Otherwise we can have 2 transactions one creating, and another deleting a node
both succeeding depending on timing. Or one transaction reading an entry,
concluding it doesn't exist, do some other work based on that information and
successfully commit even if another transaction creates the node via mkdir
meanwhile.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
(cherry picked from commit 45dee7d92b)
Watches on invalid paths were accepted, but they would never trigger. The
client also got no notification that its watch is bad and would never trigger.
Found again by the structured fuzzer, due to an error on live update reload:
the invalid watch paths would get rejected during live update and the list of
watches would be different pre/post live update.
The testcase is watch on `//`, which is an invalid path.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
(cherry picked from commit dc8caf214f)
We increment the domain's quota on mkdir even when the node already exists.
This results in a quota inconsistency after live update, where reconstructing
the tree from scratch results in a different quota.
Not a security issue because the domain uses up quota faster, so it will only
get a Quota error sooner than it should.
Found by the structured fuzzer.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
(cherry picked from commit c8b9670825)
There is a global history, containing transactions from the past 0.05s, which
get trimmed whenever any transaction commits or aborts. Destroying a domain
will cause xenopsd to perform some transactions deleting the tree, so that is
fine. But I think that a domain can abuse the xenbus reconnect facility to
cause a large history to be recorded - provided that noone does any
transactions on the system inbetween, which may be difficult to achieve given
squeezed's constant pinging.
The theoretical situation is like this:
- a domain starts a transaction, creates as large a tree as it can, commits
it. Then repeatedly:
- start a transaction, do nothing with it, start a transaction, delete
part of the large tree, write some new unique data there, don't commit
- cause a xenbus reconnect (I think this can be done by writing something
to the ring). This causes all transactions/watches for the connection to
be cleared, but NOT the history, there were no commits, so nobody
trimmed the history, i.e. it the history can contain transactions from
more than just 0.05s
- loop back and start more transactions, you can keep this up indefinitely
without hitting quotas
Now there is a periodic History.trim running every 0.05s, so I don't think you
can do much damage with it. But lets be safe an trim the transaction history
anyway on reconnect.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 2a47797d1f)
Xenmmap.unmap sets the address to MAP_FAILED in xenmmap_stubs.c. If due to a
bug there were still references to the Xenbus and we attempt to use it then we
crash. Raise an exception instead of crashing.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 5e31789634)
dbc84d2983 (Xen >= 4.9.0) deleted XS_RESTRICT
from oxenstored, which caused all the following opcodes to be shifted by 1:
reset_watches became off-by-one compared to the C version of xenstored.
Looking at the C code the opcode for reset watches needs:
XS_RESET_WATCHES = XS_SET_TARGET + 2
So add the placeholder `Invalid` in the OCaml<->C mapping list.
(Note that the code here doesn't simply convert the OCaml constructor to
an integer, so we don't need to introduce a dummy constructor).
Igor says that with a suitably patched xenopsd to enable watch reset,
we now see `reset watches` during kdump of a guest in xenstored-access.log.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Tested-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit a6ed77f1e0)
In do_domain_soft_reset(), a `libxl__domain_suspend_state' is used
without been properly initialised and disposed of. This lead do a
abort() in libxl due to the `dsps.qmp' state been used before been
initialised:
libxl__ev_qmp_send: Assertion `ev->state == qmp_state_disconnected || ev->state == qmp_state_connected' failed.
Once initialised, `dsps' also needs to be disposed of as the `qmp'
state might still be in the `Connected' state in the callback for
libxl__domain_suspend_device_model(). So this patch adds
libxl__domain_suspend_dispose() which can be called from the two
places where we need to dispose of `dsps'.
This is XSA-368.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Tested-by: Olaf Hering <olaf@aepfle.de>
master commit: dae3c3e8b2
master date: 2021-03-18 14:56:33 +0100
c/s f8c72b5261 "oxenstored: implement XS_RESET_WATCHES" from Xen 4.6
introduced reset watches support in oxenstored by mirroring the change
in cxenstored.
However the OCaml version has some additional data structures to
optimize watch firing, and just resetting the watches in one of the data
structures creates a security bug where a malicious guest kernel can
exceed its watch quota, driving oxenstored into OOM:
* create watches
* reset watches (this still keeps the watches lingering in another data
structure, using memory)
* create some more watches
* loop until oxenstored dies
The guest kernel doesn't necessarily have to be malicious to trigger
this:
* if control/platform-feature-xs_reset_watches is set
* the guest kexecs (e.g. because it crashes)
* on boot more watches are set up
* this will slowly "leak" memory for watches in oxenstored, driving it
towards OOM.
This is XSA-330.
Fixes: f8c72b5261 ("oxenstored: implement XS_RESET_WATCHES")
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
XenStored will kill any connection that it thinks has misbehaved,
this is currently happening in two places:
* In `handle_input()` if the sanity check on the ring and the message
fails.
* In `handle_output()` when failing to write the response in the ring.
As the domain structure is a child of the connection, XenStored will
destroy its view of the domain when killing the connection. This will
result in sending @releaseDomain event to all the watchers.
As the watch event doesn't carry which domain has been released,
the watcher (such as XenStored) will generally go through the list of
domains registers and check if one of them is shutting down/dying.
In the case of a client misbehaving, the domain will likely to be
running, so no action will be performed.
When the domain is effectively destroyed, XenStored will not be aware of
the domain anymore. So the watch event is not going to be sent.
By consequence, the watchers of the event will not release mappings
they may have on the domain. This will result in a zombie domain.
In order to send @releaseDomain event at the correct time, we want
to keep the domain structure until the domain is effectively
shutting-down/dying.
We also want to keep the connection around so we could possibly revive
the connection in the future.
A new flag 'is_ignored' is added to mark whether a connection should be
ignored when checking if there are work to do. Additionally any
transactions, watches, buffers associated to the connection will be
freed as you can't do much with them (restarting the connection will
likely need a reset).
As a side note, when the device model were running in a stubdomain, a
guest would have been able to introduce a use-after-free because there
is two parents for a guest connection.
This is XSA-325.
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Signed-off-by: Harsha Shamsundara Havanur <havanur@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
By setting a watch with a very large tag it is possible to trick
xenstored to send watch event messages exceeding the maximum allowed
payload size. This might in turn lead to a crash of xenstored as the
resulting error can cause dereferencing a NULL pointer in case there
is no active request being handled by the guest the watch event is
being sent to.
Fix that by just dropping such watch events. Additionally modify the
error handling to test the pointer to be not NULL before dereferencing
it.
This is XSA-324.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Currently, oxenstored checks the length of paths against 1024, then
prepends "/local/domain/$DOMID/" to relative paths. This allows a domU
to create paths which can't subsequently be read by anyone, even dom0.
This also interferes with listing directories, etc.
Define a new oxenstored.conf entry: quota-path-max, defaulting to 1024
as before. For paths that begin with "/local/domain/$DOMID/" check the
relative path length against this quota. For all other paths check the
entire path length.
This ensures that if the domid changes (and thus the length of a prefix
changes) a path that used to be valid stays valid (e.g. after a
live-migration). It also ensures that regardless how the client tries
to access a path (domid-relative or absolute) it will get consistent
results, since the limit is always applied on the final canonicalized
path.
Delete the unused Domain.get_path to avoid it being confused with
Connection.get_path (which differs by a trailing slash only).
Rewrite Util.path_validate to apply the appropriate length restriction
based on whether the path is relative or not. Remove the check for
connection_path being absolute, because it is not guest controlled data.
This is part of XSA-323.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
domain ids are prone to wrapping (15-bits), and with sufficient number
of VMs in a reboot loop it is possible to trigger it. Xenstore entries
may linger after a domain dies, until a toolstack cleans it up. During
this time there is a window where a wrapped domid could access these
xenstore keys (that belonged to another VM).
To prevent this do a cleanup when a domain dies:
* walk the entire xenstore tree and update permissions for all nodes
* if the dead domain had an ACL entry: remove it
* if the dead domain was the owner: change the owner to Dom0
This is done without quota checks or a transaction. Quota checks would
be a no-op (either the domain is dead, or it is Dom0 where they are not
enforced). Transactions are not needed, because this is all done
atomically by oxenstored's single thread.
The xenstore entries owned by the dead domain are not deleted, because
that could confuse a toolstack / backends that are still bound to it
(or generate unexpected watch events). It is the responsibility of a
toolstack to remove the xenstore entries themselves.
This is part of XSA-322.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Access rights of Xenstore nodes are per domid. Unfortunately existing
granted access rights are not removed when a domain is being destroyed.
This means that a new domain created with the same domid will inherit
the access rights to Xenstore nodes from the previous domain(s) with
the same domid.
This can be avoided by adding a generation counter to each domain.
The generation counter of the domain is set to the global generation
counter when a domain structure is being allocated. When reading or
writing a node all permissions of domains which are younger than the
node itself are dropped. This is done by flagging the related entry
as invalid in order to avoid modifying permissions in a way the user
could detect.
A special case has to be considered: for a new domain the first
Xenstore entries are already written before the domain is officially
introduced in Xenstore. In order not to drop the permissions for the
new domain a domain struct is allocated even before introduction if
the hypervisor is aware of the domain. This requires adding another
bool "introduced" to struct domain in xenstored. In order to avoid
additional padding holes convert the shutdown flag to bool, too.
As verifying permissions has its price regarding runtime add a new
quota for limiting the number of permissions an unprivileged domain
can set for a node. The default for that new quota is 5.
This is part of XSA-322.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Julien Grall <julien@amazon.com>
There are flags to turn off quotas and the permission system, so add one
that turns off the newly introduced watch permission checks as well.
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Today watch events are sent regardless of the access rights of the
node the event is sent for. This enables any guest to e.g. setup a
watch for "/" in order to have a detailed record of all Xenstore
modifications.
Modify that by sending only watch events for nodes that the watcher
has a chance to see otherwise (either via direct reads or by querying
the children of a node). This includes cases where the visibility of
a node for a watcher is changing (permissions being removed).
Permissions for nodes are looked up either in the old (pre
transaction/command) or current trees (post transaction). If
permissions are changed multiple times in a transaction only the final
version is checked, because considering a transaction atomic the
individual permission changes would not be noticable to an outside
observer.
Two trees are only needed for set_perms: here we can either notice the
node disappearing (if we loose permission), appearing
(if we gain permission), or changing (if we preserve permission).
RM needs to only look at the old tree: in the new tree the node would be
gone, or could have different permissions if it was recreated (the
recreation would get its own watch fired).
Inside a tree we lookup the watch path's parent, and then the watch path
child itself. This gets us 4 sets of permissions in worst case, and if
either of these allows a watch, then we permit it to fire. The
permission lookups are done without logging the failures, otherwise we'd
get confusing errors about permission denied for some paths, but a watch
still firing. The actual result is logged in xenstored-access log:
'w event ...' as usual if watch was fired
'w notfired...' if the watch was not fired, together with path and
permission set to help in troubleshooting
Adding a watch bypasses permission checks and always fires the watch
once immediately. This is consistent with the specification, and no
information is gained (the watch is fired both if the path exists or
doesn't, and both if you have or don't have access, i.e. it reflects the
path a domain gave it back to that domain).
There are some semantic changes here:
* Write+rm in a single transaction of the same path is unobservable
now via watches: both before and after a transaction the path
doesn't exist, thus both tree lookups come up with the empty
permission set, and noone, not even Dom0 can see this. This is
consistent with transaction atomicity though.
* Similar to above if we temporarily grant and then revoke permission
on a path any watches fired inbetween are ignored as well
* There is a new log event (w notfired) which shows the permission set
of the path, and the path.
* Watches on paths that a domain doesn't have access to are now not
seen, which is the purpose of the security fix.
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The special watches "@introduceDomain" and "@releaseDomain" should be
allowed for privileged callers only, as they allow to gain information
about presence of other guests on the host. So send watch events for
those watches via privileged connections only.
Start to address this by treating the special watches as regular nodes
in the tree, which gives them normal semantics for permissions. A later
change will restrict the handling, so that they can't be listed, etc.
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This will make it easier insert additional checks in a follow-up patch.
All watches are now fired from a single function.
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The Xenstore command XS_IS_DOMAIN_INTRODUCED should be possible for privileged
domains only (the only user in the tree is the xenpaging daemon).
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead of ignoring the transaction id for XS_WATCH and XS_UNWATCH
commands as it is documented in docs/misc/xenstore.txt, it is tested
for validity today.
Really ignore the transaction id for XS_WATCH and XS_UNWATCH.
This is part of XSA-115.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Today watch events are sent regardless of the access rights of the
node the event is sent for. This enables any guest to e.g. setup a
watch for "/" in order to have a detailed record of all Xenstore
modifications.
Modify that by sending only watch events for nodes that the watcher
has a chance to see otherwise (either via direct reads or by querying
the children of a node). This includes cases where the visibility of
a node for a watcher is changing (permissions being removed).
This is part of XSA-115.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
The special watches "@introduceDomain" and "@releaseDomain" should be
allowed for privileged callers only, as they allow to gain information
about presence of other guests on the host. So send watch events for
those watches via privileged connections only.
In order to allow for disaggregated setups where e.g. driver domains
need to make use of those special watches add support for calling
"set permissions" for those special nodes, too.
This is part of XSA-115.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Roger Pau Monné
Jason Andryuk
Juergen Gross
Kevin Stefanov
Andrew Cooper
Jan Beulich
Anthony PERARD
Richard Kojedzinszky
Olaf Hering
Nick Rosbrook
Edwin Török
Harsha Shamsundara Havanur