Add a new field p2m_size to keep track of the number of pages covered by
p2m. Change total_pages to p2m_size in functions which in fact need
the size of p2m.
This is needed because we are going to ditch the assumption that PV x86
has only one contiguous ram region. Originally the p2m size was always
equal to total_pages, but we will soon change that in later patch.
This patch doesn't change the behaviour of libxc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently all in tree code doesn't set the superpage flag, I would just
remove superpage support if I can, but Konrad wants it retained for the
moment.
As I'm going to change the p2m_host array allocation, duplicate the code
snippet to allocate p2m_host array in this patch, so that we retain the
behaviour in superpage case.
This patch introduces no functional change and it will make future patch
easier to review. Also removed one stray tab while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
EACCES cannot be distinguished against an incorrect DOMCTL_INTERFACE_VERSION,
and will cause an incorrect "need to rebuild the user-space tool set?" message
from libxc.
On the libxc side, put the useful piece of information in the error message,
rathe than the -1 from do_domctl().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- space: remove space after '(' or before ')' in 'if' condition;
- indention: align function definition/call arguments;
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XEN_DOMCTL_destroydomain so far is being special cased in libxc to
reinvoke the operation when getting back EAGAIN. Quite a few other
domctl-s have gained continuations, so I see no reason not to use them
here too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Starting from rump kernel changeset 91d5623 ("Renaming platform macros,
app-tools and autoconf target string"), __RUMPUSER_XEN__ and __RUMPAPP__
are deleted. We are supposed to use __RUMPRUN__ instead.
We still keep __RUMPUSER_XEN__ for now in order to make xen-unstable
pass osstest push gate. I will remove __RUMPUSER_XEN__ later.
Related discussion:
http://thread.gmane.org/gmane.comp.rumpkernel.user/739
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When commit 6865e52b78, "PCI multi-seg: adjust domctl interface",
is introduced, we missed to sync that head file.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s 5b5c40c0d1 "libxc: introduce a per architecture scratch pfn for temporary
grant mapping" accidentally an issue whereby there were two paths out of
xc_core_arch_get_scratch_gpfn() which returned 0, but only one of which
assigned a value to the gpfn parameter.
xc_domain_maximum_gpfn() can validly return 0, at which point gpfn 1 is a
valid scratch page to use.
In addition, widen rc before adding 1 and possibly overflowing.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Julien Grall <julien.grall@linaro.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The legacy save/restore infrastructure requires several function pointers from
the toolstack (libxl or Xend in the past) in order to work, and for HVM guests
also need to be able to play around in dom0's filesystem to move the device
model save record.
Migration v2 changes some of this, but is similarly dependent on
toolstack-provided function pointers.
Someone who wishes to re-architect the interaction of moving parts for running
a domain might be in a position to re-enabled this, but for now, explicitly
fail with ENOSYS (from xc_nomigrate.c) rather than failing with an error about
a missing function pointer (or indeed falling over a NULL pointer on certain
paths).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The code to initialize the grant table in libxc uses
xc_domain_maximum_gpfn() + 1 to get a guest pfn for mapping the grant
frame and to initialize it.
This solution has two major issues:
- The check of the return of xc_domain_maximum_gpfn is buggy because
xen_pfn_t is unsigned and in case of an error -ERRNO is returned.
Which is never catch with ( pfn <= 0 ).
- The guest memory layout maybe filled up to the end, i.e
xc_domain_maximum_gpfn() + 1 gives either 0 or an invalid PFN due to
hardware limitation.
Futhermore, on ARM, xc_domain_maximum_gpfn() is not implemented and
return -ENOSYS. This will make libxc to use always the same PFN which
may colapse with an already mapped region (see xen/include/public/arch-arm.h
for the layout).
This patch only address the problem for ARM, the x86 version use the same
behavior (ie xc_domain_maximum_gpfn() + 1), as I'm not familiar with Xen x86.
A new function xc_core_arch_get_scratch_gpfn is introduced to be able to
choose the gpfn per architecture.
For the ARM version, we use the GUEST_GNTTAB_GUEST which is the base of
the region by the guest to map the grant table. At the build time,
nothing is mapped there.
At the same time correctly check the return of xc_domain_maximum_gpfn
for x86.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If hardware support the 1GB pages, expose the feature to guest by
default. Users don't have to use a 'cpuid= ' option in config fil
e to turn it on.
If guest use shadow mode, the 1GB pages feature will be hidden from
guest, this is done in the function hvm_cpuid(). So the change is
okay for shadow mode case.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If differences are found during the verification phase of xl migrate
--debug then it is likely to crash with a segfault because the bogus
pagebuf->pfn_types[pfn] is used in a print statement instead of
pfn_type[pfn] .
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_getdomaininfo, which is being used by xc_domain_getinfo(), has
strange interface: it reports first domain which has domid >= requested domid
so all callers are supposed to check that the proper domain(s) was queried
by checking domid. xc_get_tot_pages() doesn't do that. In case the requested
domain was destroyed it will report first domain with domid > requested domid
which is apparently misleading as there is no way xc_get_tot_pages() callers
can figure out that they got tot_pages for some other domain.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
No-one (including me) paid attention during review that these
structures don't adhere to the naming requirements of the public
interface: Consistently use xen_ prefixes at least for all new
additions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The libxc xc_dom_* infrastructure uses a very simple malloc memory pool which
is freed by xc_dom_release. However the various xc_try_*_decode routines (other
than the gzip one) just use plain malloc/realloc and therefore the buffer ends
up leaked.
The memory pool currently supports mmap'd buffers as well as a directly
allocated buffers, however the try decode routines make use of realloc and do
not fit well into this model. Introduce a concept of an external memory block
to the memory pool and provide an interface to register such memory.
The mmap_ptr and mmap_len fields of the memblock tracking struct lose their
mmap_ prefix since they are now also used for external memory blocks.
We are only seeing this now because the gzip decoder doesn't leak and it's only
relatively recently that kernels in the wild have switched to better
compression.
This is https://bugs.debian.org/767295
Reported by: Gedalya <gedalya@gedalya.net>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The vGIC will emulate the same version as the hardware. The toolstack has
to retrieve the version of the vGIC in order to be able to create the
corresponding device tree node.
A new DOMCTL has been introduced for ARM to configure the domain. For now
it only allow the toolstack to retrieve the version of vGIC.
This DOMCTL will be extend later to let the user choose the version of the
emulated GIC.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduced some new xl commands to enable/disable Cache Monitoring
Technology(CMT) feature.
The following two commands is to attach/detach the CMT feature
to/from a certain domain.
$ xl psr-cmt-attach domid
$ xl psr-cmt-detach domid
This command is to display the CMT information, such as L3 cache
occupancy.
$ xl psr-cmt-show cache_occupancy <domid>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xen added a new platform_op hypercall for generic MSR access, and this
is the the tool side change to wrapper the hypercall into xc APIs.
For non-preemptible batch resource operations, group them in entries of
xc_resource_op structure. For preemptible ones, use multiple
xc_resource_op structure instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xc_unmap_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES.
Moreover, P2M_FL_ENTRIES macro uses (dinfo->p2m_size) which is always 0 here
as we don't initialize it. The result is that we always unmap just 1 frame.
xc_map_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES
on failure path.
The issue went unnoticed mostly because we use unmap_domain_meminfo and
xc_map_domain_meminfo in one-shot xen-mfndump and xen-hptool (through
xc_exchange_page()) tools. When used is long-running apps (e.g. in xl)
domains become zombies after their death.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_cacheflush hypercalls are (and will always be) -ENOSYS on x86, but
xc_domain_cacheflush() is called often during domain build and migrate for
correct behaviour on ARM.
Stub xc_domain_cacheflush() out on x86 to remove its pressure on the global
domctl lock, and the hypercall overhead (which applies further pressure to the
already heavily-contended TLB flush lock).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The following commits introduced the time reference counter MSR and
TSC/APIC frequency MSRs into the viridian feature set respectively:
e36cd2cdc984657efd91
The time reference counter MSR feature was then reverted by commit
1cd4fab14c
because a flaw in the implementation meant the counter was reset on
migration.
All of these changes were made without any addtional options being
added to the VM configuration, or any compatibility checks being made
in the domain save/restore code. Hence setting the single boolean
'viridian' option in the VM configuration yields a different set of
features depending on which version of Xen the VM is started on, and the
feature set can change across migration (so new MSRs can magically appear).
This patch grandfathers in the current viridian features set and calls them
the 'base' and 'freq' feature sets. HVM_PARAM_VIRIDIAN is re-purposed as
a feature mask. The hypervisor has only ever allowed it ot be set to 0
or 1, so the presence of the base and freq sets are indicated by setting
bit 0. The freq set can then be turned off by setting bit 1, thus
restoring the pre-Xen-4.4 base set. Newly implemented viridian features
can be optionally enabled in future by setting further bits.
The viridian option in xl.cfg(5) has also been changed to a list so
that the sets can be individually enabled or disabled. For compatibility,
if the option is specified as a boolean, then a true (1) value will enable
the base and freq sets and a false (0) value will not enable any
enlightenments.
This patch also alters the allowed write accesses to HVM_PARAM_VIRIDIAN.
Currently there is nothing to stop the guest writing this value (which,
while harmless to anything else, should not happen) and nothing to
stop a toolstack from setting the value back to zero whilst the guest is
running, causing CPUID leaves to disappear and MSR accesses to start
causing GPFs in the guest. Both of these possibilities are now disallowed:
Once the parameter is set to a non-zero value it may not be modified (only
re-written with the same value), and guests no longer have any write
access.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add xc_sched_rtds_* functions to interact with Xen to set/get domain's
parameters for rtds scheduler.
Note: VCPU's information (period, budget) is in microsecond (us).
Signed-off-by: Meng Xu <mengxu@cis.upenn.edu>
Signed-off-by: Sisu Xi <xisisu@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
[ ijc -- xenctrl.h has moved to tools/libxc/include, adjust patch to match ]
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In preparation to remove hardcoded /var/run/xen paths, provide
XEN_RUN_DIR and related directories to xc_private.h. Similar code exists
already for libxl, stubdom and other parts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In verify mode, we map the guest memory, and the guest page is
region_base + i * PAGE_SIZE. So we should csum page (region_base
+ i * PAGE_SIZE), not (region_base + (i+curbatch) * PAGE_SIZE)
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
apply_batch() only handles MAX_BATCH_SIZE pages at one time. If
there is some bogus/unmapped/allocate-only/broken page, we will
skip it. So when we call apply_batch() again, the first page's
index is curbatch - invalid_pages. invalid_pages stores the number
of bogus/unmapped/allocate-only/broken pages we have found.
In many cases, invalid_pages is 0, so we don't catch this error.
Signed-off-by: Hong Tao <bobby.hong@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Vmx_disable_intercept_for_msr() will now refuse to disable interception of
MSRs needed for memory introspection. It is not possible to gate this on
mem_access being active for the domain, since by the time mem_access does
become active the interception for the interesting MSRs has already been
disabled (vmx_disable_intercept_for_msr() runs very early on).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Tim Deegan <tim@xen.org>
* Since there would not be 32-bit hypervisor, we do not need
hypervisor_is_64bit() again.
* Remove xen_64bit from xc_cpuid_pv_policy().
* Move conditionals for LM/NX masking into architectural logic.
* Since RDTSCP could be used for both 64-bit and 32-bit architectures,
we do not need the tying to 64-bit in intel_xc_cpuid_policy().
* vmx_cpuid_intercept() has covered SYSCALL masking when vmexit and
original is_64bit or is_pae could not cover whether guest OS is really
in long mode or not. Here to drop the conditionals and leave it to
vmexit handler to do the real work.
Signed-off-by: Zhuo Song <songzhuo.sz@alibaba-inc.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[ ijc -- inserted missing ) to fix compile error ]
This fixes a bug where if a client shares more than 1 page, the
munmap call fails to clean up everything. A process which does
a lot of sharing and unsharing can run out of resources.
This patch also fixes in-tree callers of
- xc_gntshr_munmap
- xc_gnttab_munmap
to supply page counts rather than lengths.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
With the introduction of the XEN_DOMCTL_setvnumainfo
in patch titled: "xen: vnuma topology and subop hypercalls"
we put in the plumbing here to use from the toolstack. The user
is allowed to call this multiple times if they wish so.
It will error out if the nr_vnodes or nr_vcpus is zero.
Signed-off-by: Elena Ufimtseva <ufimtseva@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If max_elem is not zero then hypervisor's spinlock_profile_ucopy_elem()
will attempt to copy profile data into user's data buffer. Since this
buffer is explicitly set to (the equivalent of) NULL the copy will fail,
causing xenlockprof to fail as well.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit: c2ba706c "tools/libxc: goto correct label on error paths" by Andrew
Cooper broke Remus in Xen 4.4 or earlier versions that has this commit
backported.
With Remus, this jump essentially discards the current incomplete checkpoint
received by the backup and restore backup from the last complete checkpoint.
This is required for Remus to work and this does not break live migration. It
has been around since Xen 4.0.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move the typesafe min() macro from xc_dom_decompress_unsafe_xz.c to
xc_private.h, and complement it with an equivalent max() macro.
Replace current users of type unsafe MIN()/MAX() macros, and remove their
scattered definitions.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a new build variable "nosharedlibs".
In tools/libxc use it instead of $(stubdom).
In tools/xenstore honour it, and build static clients.
If shared libs are disabled, do not try to install or symlink them.
Set nosharedlibs when building for MiniOS or NetBSDRump.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Clarify deliberate INSTALL_SHLIB and SYMLINK_SHLIB breakage.
INSTALL_SHLIB is like INSTALL_PROG but used only for shared libraries.
SYMLINK_SHLIB is the ln -sf rune for shared library symlinks.
Use these in the appropriate places in tools/libxc and tools/xenstore.
No functional change right now. In a forthcoming patch these
variables might take on different values.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Do not try to support the dlopen-based xc indirection.
Introduce a local #define DO_DYNAMIC_OSDEP to centralise the condition.
Add comments to the #endifs.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Remove duplication by introducing DO_DYNAMIC_OSDEP.
Add comments to the #endifs.
Tries to allocate as many large (1G or 2M) pages as it can to the guest and tries
to align to the next larger size on each attempt so that we can attempt to
allocate even larger pages on the next iteration (this is currently only
exercised via a compile time debug option, which is left in place under a #if
0).
Since ARM page tables are consistent at each level there is a common helper
function which tries to allocate a levels worth of pages. The exception to this
consistency is level 0 which does not support table mappings (0.5TB
superpages!).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Wei Liu
Andrew Cooper
Chao Peng
Jan Beulich
Tiejun Chen
Julien Grall
Liang Li
M A Young
Vitaly Kuznetsov
Ian Campbell
Dongxiao Xu
Paul Durrant
Meng Xu
Stefano Stabellini
Olaf Hering
Wen Congyang
Hong Tao
Razvan Cojocaru
Zhuo Song
David Scott
Elena Ufimtseva
Arianna Avanzini
Boris Ostrovsky
Yang Hongyang
Roger Pau Monne
Ian Jackson