In 674ad2b (xenstore: extend the xenstore ring with a 'closing' signal)
two uses of uint32 are added to tools/ocaml/libs/xb/xs_ring_stubs.c .
As of ocaml 4.03.0+dev the uint32 type is no longer supported. This patch
replaces the uses of uint32 with uint32_t .
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: David Scott <dave.scott@citrix.com>
The Ocaml stub to retrieve the hypervisor console ring had a few problems.
* A single 32k buffer would truncate a large console ring.
* The buffer was static and not under the protection of the Ocaml GC lock so
could be clobbered by concurrent accesses.
* Embedded NUL characters would cause caml_copy_string() (which is strlen()
based) to truncate the buffer.
The function is rewritten from scratch, using the same algorithm as the python
stubs, but uses the protection of the Ocaml GC lock to maintain a static
running total of the ring size, to avoid redundant realloc()ing in future
calls.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Dave Scott <dave.scott@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Hvmloader uses the xenstore ring and then tries to reset it back
to its initial state before booting the guest. Occasionally xenstored
will read the ring while it is being zeroed and conclude it has
been corrupted. This prevents PV drivers from loading in the guest.
This patch updates the xenstore ring protocol definition, enabling
a server to advertise additional features to the guest. One such feature
is defined: the ability to cleanly reset the ring including the
higher-level protocol, like an enhanced RESET_WATCHES for rings.
This patch implements the ring reconnection features in oxenstored
and hvmloader, fixing the bug.
This patch also defines an 'invalid' xenstore packet type and uses this
to poison the ring over a reconnect. This will make diagnosing this
bug much easier in future.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Also moves xc_dom.h to include as it is used often by other xen tools.
Use the new include subdirectories to build Xen tools, qemu-xen and
stubdoms.
Add the old libxc include path to the programs that need it to build,
on a case by case basis and commeting that they shouldn't require
internal libxc headers to build.
[ And: update QEMU_TRADITIONAL_REVISION to corresponding qemu patch
- Ian jackson ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
OCaml is replacing its own uint32 type with the ISO C99 uint32_t type
in 4.03.0+dev. Ths patch replaces the remaining uses of uint32 with
uint32_t in the ocaml C code for xen.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: David Scott <dave.scott@citrix.com>
Toolstacks may specify a VM generation ID using the u.hvm.ms_vm_genid
field in the libxl_domain_build_info structure, when creating a
domain.
The toolstack is responsible for providing the correct generation ID
according to the Microsoft specification (e.g., generating new random
ones with libxl_ms_vm_genid_generate() as appropriate when restoring).
Although the specification requires that a ACPI Notify event is raised
if the generation ID is changed, the generation ID is never changed
when the domain is in a state to receive such an event (it's either
newly created or suspended).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
by using the flag and the new cpumap arguments introduced in
the parameters of the DOMCTL_{get,set}_vcpuaffinity hypercalls.
Now, both xc_vcpu_setaffinity() and xc_vcpu_getaffinity() have
a new flag parameter, to specify whether the user wants to
set/get hard affinity, soft affinity or both. They also have
two cpumap parameters instead of only one. This way, it is
possible to set/get both hard and soft affinity at the same
time (and, in case of set, each one to its own value).
In xc_vcpu_setaffinity(), the cpumaps are IN/OUT parameters,
as it is for the corresponding arguments of the
DOMCTL_set_vcpuaffinity hypercall. What Xen puts there is the
hard and soft effective affinity, that is what Xen will actually
use for scheduling.
In-tree callers are also fixed to cope with the new interface.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The various cpuid functions are not available on ARM, so this
makes them raise an OCaml exception. Omitting the functions
completely results in a link failure in oxenstored due to the
missing symbols, so this is preferable to the much bigger patch
that would result from adding conditional compilation into the
OCaml interfaces.
With this patch, oxenstored can successfully start a domain on
Xen/ARM.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This allows the application to pass a token to libxl in the fd/timeout
registration callbacks, which it receives back in modification or
deregistration callbacks.
It turns out that this is essential for timeout handling, in order to
identify which timeout to change on a modify event.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The original code works fine on 64-bit, but on 32-bit, the OCaml int (which is
1 bit smaller than the C int) is likely to overflow.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ocaml has a heap lock which must be held whenever ocaml code is running. Ocaml
usually drops this lock when it enters a potentially blocking low-level
function, such as writing to a file. Libxl has its own lock, which it may
acquire when being called.
Things get interesting when libxl calls back into ocaml code. There is a risk
of ending up in a deadlock when a thread holds both locks at the same time,
then temporarily drop the ocaml lock, while another thread calls another libxl
function.
To avoid deadlocks, we drop the ocaml heap lock before entering libxl, and
reacquire it in callbacks to ocaml. This way, the ocaml heap lock is never held
together with the libxl lock, except in osevent registration callbacks, and
xentoollog callbacks. If we guarantee to not call any libxl functions inside
those callbacks, we can avoid deadlocks.
This patch handle the dropping and reacquiring of the ocaml heap lock by the
caml_enter_blocking_section and caml_leave_blocking_section functions, and
related macros. We are also careful to not call any functions that access the
ocaml heap while the ocaml heap lock is dropped. This often involves copying
ocaml values to C before dropping the ocaml lock.
The ao_how in aohow_val is now malloc'ed, just to make this function a little
easier to use.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Also:
* Reorganise toplevel OCaml functions into modules of Xenlight.
* Factor out the management of ao_how into the function aohow_val. The ao_how
is now malloc'ed, just to make this function a little easier to use.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Having bindings to the low-level functions libxl_osevent_register_hooks and
related, allows to run an event loop in OCaml; either one we write ourselves,
or one that is available elsewhere.
The Lwt cooperative threads library (http://ocsigen.org/lwt/), which is quite
popular these days, has an event loop that can be easily extended to poll any
additional fds that we get from libxl. Lwt provides a "lightweight" threading
model, which does not let you run any other (POSIX) threads in your
application, and therefore excludes an event loop implemented in the C
bindings.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Libxl functions such as libxl_domain_create_new take large structs
of configuration parameters. Often, we would like to use the default
values for many of these parameters.
The struct and keyed-union types in libxl have init functions, which
fill in the defaults for a given type. This commit provides an OCaml
interface to obtain records of defaults by calling the relevant init
function.
These default records can be used as a base to construct your own
records, and to selectively override parameters where needed.
For example, a Domain_create_info record can now be created as follows:
Xenlight.Domain_create_info.({ default ctx () with
ty = Xenlight.DOMAIN_TYPE_PV;
name = Some vm_name;
uuid = vm_uuid;
})
For types with KeyedUnion fields, such as Domain_build_info, a record
with defaults is obtained by specifying the type key:
Xenlight.Domain_build_info.default ctx ~ty:Xenlight.DOMAIN_TYPE_HVM ()
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The libxl IDL is based on C type "char *", and therefore "strings" can
by NULL, or be an actual string. In ocaml, it is common to encode such
things as option types.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In order to avoid newly created OCaml values from being GC'ed, they must be
registered as roots with the GC, before an iteration of the GC may happen. The
Val_* functions potentially allocate new values on the OCaml heap, and may
trigger an iteration of the OCaml GC.
The way to register a value with the GC is to assign it to a variable declared
with a CAMLparam or CAMLlocal macro, which put the value into a struct that
can be reached from a GC root.
This leads to slightly weird looking C code, but avoids hard to find segfaults.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since the context has a logger we can get rid of the logger built into these
bindings and use the xentoollog bindings instead.
The gc is of limited use when most things are freed with libxl_FOO_dispose,
so get rid of that too.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Rather than allocating a new context for every libxl call begin to
switch to a model where a context is allocated by the caller and may
then be used for multiple calls down into the library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
These bindings allow ocaml code to receive log message via xentoollog
but do not support injecting messages into xentoollog from ocaml.
Receiving log messages from libx{c,l} and forwarding them to ocaml is
the use case which is needed by the following patches.
Add a simple noddy test case (tools/ocaml/test).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
[ ijc -- dropped the xtl test harness, it failed to link ]
* bitmaps
* string_list
* key_value_list
* cpuid_policy_list (left "empty" for now)
None of these are used yet, so no change to the generated code.
Bitmap_val requires a ctx, so leave it as an abort for now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
A KeyedUnion consists of two fields in the containing struct. First an
enum field ("e") used as a descriminator and second a union ("u")
containing potentially anonymous structs associated with each enum
value.
We map the anonymous structs to structs named after the descriminator
field ("e") and the specific enum values. We then declare an ocaml
variant type name e__union mapping each enum value to its associated
struct.
So given IDL:
foo = Enumeration("foo", [
(0, "BAR"),
(1, "BAZ"),
])
s = Struct("s", [
("u", KeyedUnion(none, foo, "blargle", [
("bar", Struct(...xxx...)),
("baz", Struct(...yyy...)),
])),
])
We generate C:
enum foo { BAR, BAZ };
struct s {
enum foo blargle;
union {
struct { ...xxx... } bar;
struct { ...yyy... } baz;
} u;
}
and map this to ocaml
type foo = BAR | BAZ;
module S = struct
type blargle_bar = ...xxx...;
type blargle_baz = ...yyy...;
type blargle__union = Bar of blargle_bar | Baz of blargle_baz;
type t =
{
blargle : blargle__union;
}
end
These type names are OK because they are already within the namespace
associated with the struct "s".
If the struct associated with bar is empty then we don't bother with
blargle_bar of "of blargle_bar".
No actually change in the generated code since we don't generate any
KeyedUnions yet.
The actual implementation was inspired by
http://www.linux-nantes.org/~fmonnier/ocaml/ocaml-wrapping-c.php#ref_constvrnt
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Not sure how it got there...
Coverity-ID: 1056196
This is CVE-2013-4370 / XSA-69
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
add check logic when read from IO ring, and if error happens,
then mark the reading connection as "bad", Unless vm reboot,
oxenstored will not handle message from this connection any more.
xs_ring_stubs.c: add a more strict check on ring reading
connection.ml, domain.ml: add getter and setter for bad flag
process.ml: if exception raised when reading from domain's ring,
mark this domain as "bad"
xenstored.ml: if a domain is marked as "bad", do not handle it.
Signed-off-by: John Liu <john.liuqiming@huawei.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Also add a reference to tools/libxc/xenctrl.h, which is where
the underlying C functions are defined.
Signed-off-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Remove the mention of the C function names from the .mli -- this is only
needed in the implementation .ml
Signed-off-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Michael Young
Andrew Cooper
Wei Liu
David Scott
Olaf Hering
Stefano Stabellini
David Vrabel
Dario Faggioli
Don Slutz
Anil Madhavapeddy
Rob Hoes
Matthew Daley
=John Liu
David Scott