The IDL requires a specific value for each enumerate, this make it
much easier to avoid (or at least track) ABI changes since they must
now be explicit.
I believe I have used the same values as would have been chosen
previoulsy but have not confirmed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In other words the values for an enum type libxl_foo always take the
form LIBXL_FOO_VALUE.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The FV/PV distinction is not particular to the device model, although
that remains the only user for now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
c/s 22275: "tools: cleanup domain save switch_qemu_logdirty callback"
introduced a whole bunch of error code fixups. In the process, it also
ended up treating the success return code (0) from
switch_qemu_logdirty as an error and vice versa.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
The new --null option allows one to test and play with just the
memory checkpointing and network buffering aspect of remus, without
the need for a second host. The disk is not replicated. All replication
data is sent to /dev/null. This option is pretty handy when a user
wants to see the page churn for his workload or observe the latency hit
though the latter will not be accurate.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
While running remus, when an error occurs during checkpointing
(e.g., timeouts on primary, failing to checkpoint network buffer
or disk or even communication failure) the domU is sometimes
left in suspended state on primary. Instead of blindly closing
the checkpoint file handle, attempt to resume the domain before
the close.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The only "translation" is to the C locale (e.g. the NUL
translation). I think it very unlikely we are going to see any new
translations of the XenAPI error messages at this point so the only
purpose of this code appears to be to periodically regenerate
xen-xm.pot with a new embedded timestamp, to the detriment of those of
us who use a version control system.
After much beating with sticks I mananged to enable XenAPI support in
xend and configure xm such that it returns "Permission denied." (AKA
the SESSION_AUTHENTICATION_FAILED message) which I take to be a sign
I've not broken things too badly.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This completely removes libxenstore from libxl users' view.
xl still needs libxenctrl directly due to the direct use of the
xentoollog functionality but it is not exposed to the indirect linkage
anymore.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
current check includes ingress and pfifo_fast.
Add mq to the list of allowed qdiscs already installed
on ifb. This patch fixes cases where remus fails to start,
due to an mq qdisc already present on the vif.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
All external users pass 0 anyway so make the version of
libxl_domain_rename which takes a transaction internal and provide an
external facing function which does not expose a transaction.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In particular if binary A uses libB and libB uses libC entirely
internally then A does not need to link against libC only libB.
However when linking binary A the linker does need to have visibility
of the libraries which libB links against (libC in this example). For
out of tree uses this is achieved without fuss due because the
libraries are installed in a standard path. However in the case of
in-tree users the linker needs a hint in the form of the -rpath-link
option. Therefore a new class of build variable, $(SHLIB_FOO), is
introduced which includes the linker options needed to link against a
library which uses libFOO. The intention is that $(LDLIBS_bar) will
include the $(SHLIB_foo)s which it uses where necessary rather
requiring that users are aware of this.
For the python extensions this change appears particularly large since
previously each of python bindings were linked against the union of
all possible libraries used by all bindings instead of just what they
individually needed.
This change removes a dependency on libdl.so from nearly everything
in the system, only libxenctrl actually uses it.
In the context of xl/libxl the intention of libxl is to remove any
need for a user of libxl to know about libxenstore or libxenctrl,
however in the current build it is xl which links against those
libraries rather than libxl (which only links against libc). After
this change libxl correctly depends on the libraries it uses and xl
does not depend on libraries which it is not support to be required to
know about. Note that xl does depend on libxenctrl.so since it uses
xtl_* directly.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Currently we pile all the backend and format information pertaining to
disk option in a single enum. This check-in separates the two and
uses two enums, one for disk format and another for disk backend.
This helps clearly differentiate between disk format and backend
within the implementation and also helps cleanup the code in this area
in preparation for the impending parser revamping to be done post 4.1.
Along with separating format and backend, this check-in also removes
unwanted types and renames variables in the disk interface and fixes
the code affected by the interface changes.
In specific, here are the disk interface changes made - In
libxl_device_disk structure physpath was renamed to pdev_path,
virtpath was renamed to vdev, phystype was removed and replaced with
backend and format enums. Also previously a single enum
libxl_disk_phystype held the values for qcow, qcow2, vhd, aio, file,
phy, empty and that got refactored into two enums, libxl_disk_format
to hold unknown, qcow, qcow2, vhd, raw, empty and libxl_disk_backend
to hold unknown, phy, tap and qdisk.
Signed-off-by: Kamala Narasimhan <kamala.narasimhan@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
By default, vscsi expects to be passed the final device name (eg
/dev/st3) instead of one of the various udev symlinks (eg
/dev/tape/by-path/pci-0000:01:08.0-scsi-0:0:2:0-st). The following patch
resolves the path to the real path if the name starts with /dev/
Signed-off-by: James Harper <james.harper@bendigoit.com.au>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Userspace tools support external block scripts (e.g. block-drbd
provided by drbd project). The psuedo-bootloader setup code in
xend has a few limitations wrt external block scripts, which this
patch addresses.
blkif.py: parse_uname() utility function should be able to parse a
disk specifier understood by the rest of the tools.
XendDomainInfo.py: Block devices using external block scripts must
be attached to dom0 before running the psuedo-bootloader.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
Tested-by: Shriram Rajagopalan <rshriram@gmail.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Allow setting a string field to None as a way to zero it out.
Implement setting/getting libx_file_references as strings.
Produce relevant Exceptions marshallers which remain unimplemented.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
this is the patch to check for device model (in XendConfig.py) when the
device_model had no path specified, i.e. XenD was trying to read the
file on the auxbin path. Without this patch applied the meaningless
python error "coercing to Unicode: need string or buffer, NoneType
found" occurred:
[2010-11-30 13:56:47 5255] ERROR (xmlrpclib2:181) Internal error
handling xend.domain.create
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/xen/util/xmlrpclib2.py",
line 134, in _marshaled_dispatch
response = self._dispatch(method, params)
File "/usr/lib64/python2.4/SimpleXMLRPCServer.py", line 406, in _dispatch
return func(*params)
File
"/usr/lib64/python2.4/site-packages/xen/xend/server/XMLRPCServer.py",
line 80, in domain_create
info = XendDomain.instance().domain_create(config)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py",
line 1001, in domain_create
dominfo = XendDomainInfo.create(config)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py",
line 97, in create
domconfig = XendConfig.XendConfig(sxp_obj = config)
File "/usr/lib64/python2.4/site-packages/xen/xend/XendConfig.py",
line 367, in __init__
self.validate()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendConfig.py",
line 558, in validate
self._platform_sanity_check()
File "/usr/lib64/python2.4/site-packages/xen/xend/XendConfig.py",
line 502, in _platform_sanity_check
if not os.path.exists(self['platform']['device_model']):
File "/usr/lib64/python2.4/posixpath.py", line 171, in exists
st = os.stat(path)
TypeError: coercing to Unicode: need string or buffer, NoneType found
This patch raises VmError with message that no valid device model was
specified if None type was found in the device_model specification.
It's been tested on non-existing device model where the message is being
printed. If an invalid (but existing) device_model is set in the
configuration file the domain was destroyed because it crashed. If there
is a path specified (i.e. it's not using auxbin path) it bails with
error that the device model was not found (which was already implemented
there).
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
drbd's block-drbd script handles all of the details that c/s 20158
introduces within xend :-(. This c/s should be reverted as it causes
a regression. Jim Fehlig tested drbd without 20158 and it works fine.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Jim Fehlig <jfehlig@novell.com>
Added new function libxl_get_topologyinfo() to obtain this information from
hypervisor.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Adds depends information for building python extensions.
The extensions depend on the library binaries they are using.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Simply taking stat()'s st_rdev doesn't work here, as the minor is
split into two parts, the major is present, and the "extended" bit
isn't set.
Rather than fixing this in a way that would likely be OS-dependent,
simply remove the access to the device file, and instead just parse
the provided string (as is done e.g. for block-attach).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Attempting to define or create a domain whose XML config contains a
passthru PCI device fails with libvirt
xen84: # cat win2k8r2.xml
...
<hostdev mode='subsystem' type='pci' managed='no'>
<source>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
</hostdev>
...
xen84: # virsh create ./win2k8r2.xml
error: Failed to create domain from ./win2k8r2.xml
error: POST operation failed: xend_post: error from xen daemon:
(xend.err "Error creating domain: 'key'")
The PCI device config maintained by xend includes a 'key' field, which is
initialized by xm client when using that tool and traditional xen config
file. libvirt, which uses xend's sexpr-over-http interface (is that the
proper name for that interface??), does not initialize this field - and
shouldn't be expected to do so IMO. Clients should not be bothered with
xend's internal representation of a PCI device.
This patch populates the 'key' field within xend if it is uninitialized,
similar to current initialization of 'uuid' field. The 'vdevfn' field
suffers a similar problem if not (optionally) specified by user.
AFAICT, the xm client initializes 'vdevfn' to 0x100 if not specified so
I've done the same here.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Correction/Extension of changeset 22000:4fc66044477d
"Values of cpu_weight and cpu_cap are lost after xend restart"
Values of cpu_weight and cpu_cap taken from managed SXP file have to
be converted from str to int.
Signed-off-by: Lutz Dube <lutz.dube@ts.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cpumap types in tools (libxc and libxl) are changed to be based on bytes like
in the interface to the hypervisor.
To make handling easier the size of used cpumaps is always based on the
number of physical cpus supported by the hypervisor. This eliminates the need
to keep track of the cpumap size in external interfaces.
In libxl a macro for cycling through a cpumap is added (libxl_for_each_cpu).
Interfaces changed:
libxl_set_vcpuaffinity()
libxl_cpumap_alloc()
xc_vcpu_setaffinity()
xc_vcpu_getaffinity()
xc_cpupool_freeinfo()
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When using cpupools don't pin vcpus to numa nodes as this might
conflict with the cpupool definition.
numa placement should be handled by cpupool configuration instead.
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When trying to live migrate guest with great memory (e.g. 20 GB),
there's delay caused by destroying source copy of domain. To speed up
this process we can close socket before starting guest destroy, as
source guest is not running anymore.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
I have a suspicion these routines should be using libxc rather than
reimplementing all the hypercalls again, but I don't have the
enthusiasm to fix it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Move the function into struct save_callbacks with the others and add
the void *closure to the callback arguments.
Add and propagate an error return code from the callback.
Use this in libxl to pass the save context to
libxl__domain_suspend_common_switch_qemu_logdirty allowing us to reuse
the parent's xenstore handle, gc context etc.
Also add an apparently missing libxl__free_all to
libxl__domain_suspend_common.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The xm commands pool-* are renamed to cpupool-*
The old pool-* commands are defined as aliases.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/python/xen/xm/pool-create.py => tools/python/xen/xm/cpupool-create.py
rename : tools/python/xen/xm/pool-new.py => tools/python/xen/xm/cpupool-new.py
rename : tools/python/xen/xm/pool.py => tools/python/xen/xm/cpupool.py
To be able to support arbitrary numbers of physical cpus it was necessary to
include the size of cpumaps in the xc-interfaces for cpu pools.
These were:
definition of xc_cpupoolinfo_t
xc_cpupool_getinfo()
xc_cpupool_freeinfo()
xc_cpupool_getinfo() and xc_cpupool_freeinfo() are changed to allocate the
needed buffer and return it.
Signed-off-by: juergen.gross@ts.fujitsu.com
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently the wrappers for these hypercalls swallow partial success
and return failure to the caller.
In order to use these functions more widely instead of open-coding
uses of XENMEM_* and xc_memory_op add variants which return the actual
hypercall result.
Therefore add the following functions:
xc_domain_increase_reservation
xc_domain_decrease_reservation
xc_domain_populate_physmap
and implement the existing semantics using these new functions as
xc_domain_increase_reservation_exact
xc_domain_decrease_reservation_exact
xc_domain_populate_physmap_exact
replacing the existing xc_domain_memory_* functions.
Use these new functions to replace all open coded uses of
XENMEM_increase_reservation, XENMEM_decrease_reservation and
XENMEM_populate_physmap.
Also rename xc_domain_memory_*_pod_target to xc_domain_*_pod_target
for consistency.
Temporarily add a compatibility macro for
xc_domain_memory_populate_physmap to allow time for qemu to catch up.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The double indirection has been unnecessary since 9867:ec61a8c25429,
there is no possibility of the buffer being reallocated now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Campbell
Shriram Rajagopalan
cegger
Keir Fraser
Kamala Narasimhan
James Harper
Stefano Stabellini
Kouya Shimura
Jim Fehlig
Gianni Tedesco
Michal Novotny
Ian Jackson
Juergen Gross
Jan Beulich
Lutz Dube
Miroslav Rezanina