Add a check, like the existing check for non-ANSI C in the public
headers, that runs the public headers through a C++ compiler to
flag non-C++-friendly constructs.
Unlike the ANSI C check, we accept GCC-isms (gnu++98), and we also
check various tools-only headers.
Also tidy up the runes for these checks to be a bit more readable.
io/ring.h uses 'private' as a field name, which is a keyword in C++;
this patch doesn't change that. Instead the check works around it.
Reported-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Don Slutz <dslutz@verizon.com>
Some systems have python-config include -D_FORTIFY_SOURCE in the
CFLAGS. But -D_FORTIFY_SOURCE does not (currently) work with -O0, and
-O0 is enabled in debug builds (since 1166ecf781). As a result, on
those systems, debug builds fail.
Work around this problem as follows:
* In configure, detect -D_FORTIFY_SOURCE in $(python-config --cflags)
* If detected, set the new autoconf substitution and make variable
PY_NOOPT_CFLAGS to -O1.
* In tools/Rules.mk, where we add -O0, also add PY_NOOPT_CFLAGS
(which will override the -O0 with -O1 if required).
Overriding the -O0 is better than disabling Fortify because the
latter might have an adverse security impact. A user who wants to
disable optimisation completely even for Python and also disable
Fortify can set the environment variable
EXTRA_CFLAGS_XEN_TOOLS='-U_FORTIFY_SOURCE -O0'
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Euan Harris <euan.harris@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Don Slutz <dslutz@verizon.com>
A pkg-config file for libxl. It also contains two variables
(xenfirmwaredir and libexec_bin) so that tools that are very keen on
knowing the locations of Xen binaries (say, libvirt) can use them to
determine the location of the binaries.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This was disabled by default in Xen 4.4. Since xend has now been
removed from the tree I don't believe anything is using it.
We need to pass an explicit CONFIG_BLKTAP1=n to qemu-xen-traditional
otherwise it defaults to y and doesn't build.
This patch does all the ground work, the tools/blktap directory will
be removed in the next (*huge*) patch.
Note that this has no impact on blktap2, which is what libxl supports.
blktap1 was only usable via xend which has already been removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
This patch lays the groundwork to convert variables used in Makefiles
to the common automake style, i.e. PREFIX becomes prefix, MANDIR becomes
mandir and so on.
The reason is that configure variables such as mandir expand to
${datarootdir}/man, and datarootdir expands to ${prefix}/share. This
requires extra expansion in configure.ac before assigning to MANDIR.
Special care must be taken when variable substition is done in other
files, such as xencommons.in. All @VARIABLES@ used in these files have
to be the expanded version, or all other variables must be available at
runtime.
This patch by itself changes nothing, but upcoming changes will make use
of the lowercase variables.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The 'xen' binary for arm64 is both an Image file and a PE/COFF executable,
copy it to xen.efi so that the 'make install' processing is shared with
x86. Prior to this 'make install' was broken on arm64.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Libnl3 is required for controlling Remus network buffering.
This patch adds dependency on libnl3 (>= 3.2.8) to autoconf scripts.
It also provides the ability to configure tools without libnl3 support
i.e., without network buffering support.
When there is no network buffering support, libxl__netbuffer_enabled()
returns 0, otherwise returns 1. The callers of this api will be
introduced in the rest of the series.
NOTE: This patch changes tools/configure.ac, please rerun
autogen.sh while applying the patch.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In preparation to add support for ARM LPAE mem_event, relocate mem_access,
mem_event and auxiliary functions into common Xen code.
This patch makes no functional changes to the X86 side, for ARM mem_event
and mem_access functions are just defined as placeholder stubs, and are
actually enabled later in the series.
Edits that are only header path adjustments:
xen/arch/x86/domctl.c
xen/arch/x86/mm/hap/nested_ept.c
xen/arch/x86/mm/hap/nested_hap.c
xen/arch/x86/mm/mem_paging.c
xen/arch/x86/mm/mem_sharing.c
xen/arch/x86/mm/p2m-pod.c
xen/arch/x86/mm/p2m-pt.c
xen/arch/x86/mm/p2m.c
xen/arch/x86/x86_64/compat/mm.c
xen/arch/x86/x86_64/mm.c
Makefile adjustments for new/removed code:
xen/common/Makefile
xen/arch/x86/mm/Makefile
Relocated prepare_ring_for_helper and destroy_ring_for_helper functions:
xen/include/xen/mm.h
xen/common/memory.c
xen/include/asm-x86/hvm/hvm.h
xen/arch/x86/hvm/hvm.c
Code movement of mem_event and mem_access:
xen/arch/x86/mm/mem_access.c -> xen/common/mem_access.c
xen/arch/x86/mm/mem_event.c -> xen/common/mem_event.c
xen/include/asm-x86/mem_access.h -> xen/include/xen/mem_access.h
xen/include/asm-x86/mem_event.h -> xen/include/xen/mem_event.h
Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
Acked-by: Tim Deegan <tim@xen.org>
Preserve existing behaviour: if the option was not given, set existing
defaults for FreeBSD, Solaris and everything else.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Since it may not exist when doing e.g. "make clean". There is
existing logic in the makefiles which will raise an error if an
actual build target is invoked without having run configure.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This will allow us to share the same module list with
systemd, and lets us upkeep it in one place. Document this
while at it on the top level README and expand on the wiki:
http://wiki.xen.org/wiki/Category:Host_Configuration#Kernel_modules
In order to upkeep parallelism builds be explicit about the
requirement to complete all actions before any installation
targets.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This moves all generic path variables to a new the config/Paths.mk.in
input source file to be processed at configure time, tons of files use
these so this just share them. This also paves the way to let us
easily dynamically configure these with autoconf, for now we leave the
same presets as was present before.
This work was prompted by looking for an autoconf way to do
replacements for the hotplug global file, while at it I realized
that a few other files use the same variables and have in places
around the tree the same constructs for generating their own
files. This makes use of the old buildmakevars2file() but generalizes
the definition of the paths at configure time and spreads the
new definitions out throughout the build system.
This has no impact on building the hypervisor and extras/mini-os,
you do not need to, and are not expected to, run configure to build
those targets.
While at it lets add some documentation on the for the two files on
the source file, we can expand further details on the wiki [0].
[0] http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Tim Deegan <tim@xen.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
Support
./configure --host=x86_64-rumpxen-netbsd
./configure --host=i386-rumpxen-netbsd
Setting --host tells configure we are cross compiling and therefore
has various automatic effects.
But in this patch we make some deliberate changes as well:
* We disable a large number of configure tests for libraries
etc. which don't exist.
* We set CONFIG_RUMP in Tools.mk.
* Hence, we automatically set XEN_OS.
(I have only tested the 32-bit build but I think the 64-bit build
should work just as well.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v3: Add comment to `fi'
v2: Mention x86_64.
Drop an erroneous whitespace change.
Introduce a new build variable "nosharedlibs".
In tools/libxc use it instead of $(stubdom).
In tools/xenstore honour it, and build static clients.
If shared libs are disabled, do not try to install or symlink them.
Set nosharedlibs when building for MiniOS or NetBSDRump.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Clarify deliberate INSTALL_SHLIB and SYMLINK_SHLIB breakage.
In principle it would be possible to make a rumpuser-xen-based stub
xenstored, but all the necessary pieces do not yet exist.
So provide a facility to disable compilation of xenstored, and use it
to disable it on rump kernels.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
blktap2 will be enabled by default on Linux systems only, also give
the oportunity to disable it from configure.
Remove the gate in the Makefile that only allows enabling blktap{1,2}
on Linux, since this is now done in a more flexible way on configure.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
Xen is currently installed into /boot, which is a hardcoded path. This
makes it impossible to install two xen.rpm packages from 'make rpmball'
in parallel because rpm complains about conflicting files.
Use BOOT_DIR to define the install path to make it possible to install
xen.gz below --prefix=.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
The manage-vtpmmgr.pl script is an example client for interacting with
the TPM Manager; it is intended to run in a management domain with a
vTPM (which may be dom0). It is used to create and manage vTPMs and
vTPM groups.
The calc.pl script is an example manager of a vTPM group. It signs
the configuration lists used by the TPM Manager with a locally held
private key.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We haven't shipped a XenoLinux kernel for more releases than I can remember.
We held onto these because osstest was using them but this is no longer the
case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These were added by 7dbfc2f8b0 "docs: Honour --{en, dis}able-xend when
building docs" between v1 and the (eventually committed) v2 of 9e8672f1c3
"tools: remove xend and associated python modules" and were missed when
rebasing for v2.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This was a C interface to a very early version of the XenAPI, it has not kept
up with developments to the API e.g. in xapi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering
Tamas K Lengyel
Edgar E. Iglesias
Tim Deegan
Ian Jackson
Oleksandr Tyshchenko
Wei Liu
Ian Campbell
Roy Franz
Jan Beulich
Yang Hongyang
Stefano Stabellini
Luis R. Rodriguez
Roger Pau Monne
Andrew Cooper
Fabio Fantoni
Daniel De Graaf