Current libxl code will always enable Hardware Assisted Paging (HAP),
expecting that the hypervisor will fallback to shadow if HAP is not
available. With the changes to DOMCTL_createdomain that's not the case
any longer, and the hypervisor will raise an error if HAP is not
available instead of silently falling back to shadow.
In order to keep the previous functionality report whether HAP is
available or not in XEN_SYSCTL_physinfo, so that the toolstack can
select a sane default if there's no explicit user selection of whether
HAP should be used.
Note that on ARM hardware HAP capability is always reported since it's
a required feature in order to run Xen.
Fixes: d0c0ba7d3d ('x86/hvm/domain: remove the 'hap_enabled' flag')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-28) complains:
xenctrl_stubs.c: In function 'stub_xc_domain_create':
xenctrl_stubs.c:216:28: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.arch.emulation_flags = ocaml_list_to_c_bitmap
^
xenctrl_stubs.c:198:12: error: 'val' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
cfg.flags = ocaml_list_to_c_bitmap
^
cc1: all warnings being treated as errors
GCC doesn't point at the correct piece of code, but the diagnostic text is
correct, and can occur when the list is empty. Initialise val to 0.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Fix a broken regexp which would mention `$/' when it ought to have
mentioned `$'. The result would be that it would match lines like
type some_ocaml_type = Thing | Other_Thing
but ignore everything but the type name, giving wrong answers.
Check that we check mentioned types. Otherwise if we fail to spot
some suitable thing in the ocaml, we would just omit checking this
type !
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
In the generated C, add some comments saying where we found the ocaml
type. This helps with debugging. (I considered emitting #line
directives but decided this would be more confusing than helpful.)
Improve two dies.
Use better-named filehandles (perl prints thier names when it dies).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering
XEN_SYSCTL_PHYSCAP_directio without adjusting the Ocaml
physinfo_cap_flag enumeration.
Add build machinery which will check the ABI correspondence.
This will result in a compile time failure whenever constants get
renumbered/added without a compatible adjustment to the Ocaml ABI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering XEN_SYSCTL_PHYSCAP_directio
without adjusting the Ocaml physinfo_cap_flag enumeration. Fix this by
inserting CAP_PV between CAP_HVM and CAP_DirectIO.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This functionality is obsolete. It was introduced by c/s 41296317a3 into
Xend, but was never exposed in libxl.
Nothing limits this to PV guests, but it makes no sense for HVM guests.
Looking through the XenServer templates, this was used to work around bugs in
the 32bit RHEL/CentOS 4.7 and 4.8 kernels (fixed in 4.9) and RHEL/CentOS/OEL
5.2 and 5.3 kernels (fixed in 5.4). RHEL 4 as a major version went out of
support in 2017, whereas the 5.2/5.3 kernels went out of support when 5.4 was
released in 2009.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit 81946a73dc removed
Xenctrl.with_intf based on its undesirable behaviour of opening and
closing a Xenctrl connection with every invocation. This commit
re-introduces with_intf but with an updated behaviour: it maintains a
global Xenctrl connection which is opened upon first usage and kept
open. This handle can be obtained by clients using new functions
get_handle() and close_handle().
The main motivation of re-introducing with_intf is that otherwise
clients will have to implement this functionality individually.
Signed-off-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This wrapper hides an opening and closing of the xenctrl handle, which amongst
other things opens and closes multiple device files.
A process should create one handle at the start of day and reuse that; indeed
there is no guarentee that the process will retain sufficient permissions to
re-open /dev/xen/privcmd at a later point.
With the final user of Xenctrl.with_intf removed, drop the wrapper entirely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
XEN_DOMCTL_max_vcpus is a mandatory hypercall, but nothing actually prevents a
toolstack from unpausing a domain with no vcpus.
Originally, d->vcpus[] was an embedded array in struct domain, but c/s
fb442e217 "x86_64: allow more vCPU-s per guest" in Xen 4.0 altered it to being
dynamically allocated. A side effect of this is that d->vcpu[] is NULL until
XEN_DOMCTL_max_vcpus has completed, but a lot of hypercalls blindly
dereference it.
Even today, the behaviour of XEN_DOMCTL_max_vcpus is a mandatory singleton
call which can't change the number of vcpus once a value has been chosen.
In preparation to remote the hypercall, extend xen_domctl_createdomain with
the a max_vcpus field and arrange for all callers to pass the appropriate
value. There is no change in construction behaviour yet, but later patches
will rearrange the hypervisor internals.
For the python stubs, extend the domain_create keyword list to take a
max_vcpus parameter, in lieu of deleting the pyxc_domain_max_vcpus function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XEN_DOMCTL_set_gnttab_limits is a fairly new hypercall, and is strictly
mandatory. As it pertains to domain limits, it should be provided at
createdomain time.
In preparation to remove the hypercall, extend xen_domctl_createdomain with
the fields and arrange for all callers to pass appropriate details. There is
no change in construction behaviour yet, but later patches will rearrange the
hypervisor internals, then delete the hypercall.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In future patches, the structure will be extended with further information,
and this is far cleaner than adding extra parameters.
The python stubs are the only user which passes NULL for the existing config
option (which is actually the arch substructure). Therefore, the #ifdefary
moves to compensate.
For libxl, pass the full config object down into
libxl__arch_domain_{prepare,save}_config(), as there are in practice arch
specific settings in the common part of the structure (flags s3_integrity and
oos_off specifically).
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The underlying C function is about to make the same change, and the structure
is going to gain extra fields.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
This function is entirely internal to xenctrl stubs, and serves only to
convert the uuid string to an integer array (making 16 memory allocations as
it goes), while the C stubs turns the integer array back into a binary array.
Instead, pass the string all the way down into C, and have sscanf() unpack it
directly into a xen_domain_handle_t object.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
CC xenctrl_stubs.o
xenctrl_stubs.c: In function 'failwith_xc':
xenctrl_stubs.c:65:17: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^
xenctrl_stubs.c:64:4: note: 'snprintf' output 6 or more bytes (assuming 1029) into a destination of size 1028
snprintf(error_str, sizeof(error_str),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%d: %s: %s", error->code,
~~~~~~~~~~~~~~~~~~~~~~~~~~
xc_error_code_to_desc(error->code),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
error->message);
~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[8]: *** [/build/xen-git/src/xen/tools/ocaml/libs/xc/../../Makefile.rules:37: xenctrl_stubs.o] Error 1
m
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
c/s 4ddf474e2 "tools/xen-mceinj: Pass in GPA when injecting through
MSR_MCI_ADDR" removed the remaining user of hypercall.
It has been listed as broken, deprecated and wont-fix since XSA-74, so take
this opportunity to remove it completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There are no current users which I can locate. One piece of xend which didn't
move forwards into xl/libxl is this:
# Configure host CPUID consistency checks, which must be satisfied for this
# VM to be allowed to run on this host's processor type:
#cpuid_check=[ '1:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx' ]
# - Host must have VMX feature flag set
The implementation of xc_cpuid_check() is conceptually broken. Dom0's view of
CPUID is not the approprite view to check, and will be wrong in the presence
of CPUID masking/faulting, and for HVM-based toolstack domains.
If it turns out that the functionality is required, it should be implemented
in terms of XEN_SYSCTL_get_cpuid_policy to use the proper CPUID view.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
GCC 7.1.1 complains that several buffers passed to snprintf() in xenpmd
and tools/ocmal/xc are too small to hold the largest possible resulting string,
which is calculated by adding up the maximum length of all the substrings.
The warnings are treated as errors by -Werror, and goes like this (abbreviated):
xenpmd.c:94:36: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_INFO_FILE_PATH "/proc/acpi/battery/%s/info"
^
xenpmd.c:113:13: note: ‘snprintf’ output between 25 and 280 bytes into a
destination of size 32
xenpmd.c:95:37: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_STATE_FILE_PATH "/proc/acpi/battery/%s/state"
^
xenpmd.c:116:13: note: ‘snprintf’ output between 26 and 281 bytes into a
destination of size 32
xenctrl_stubs.c:65:15: error: ‘%s’ directive output may be truncated writing
up to 1023 bytes into a region of size 252 [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^~
xenctrl_stubs.c:64:4: note: ‘snprintf’ output 5 or more bytes (assuming 1028)
into a destination of size 256
Enlarge the size of these buffers as suggested by the complier
(and slightly rounded) to fix the warnings.
No functional changes.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Later changes (Patch titled "tools/libxc: Use featuresets rather than
guesswork") will cause the cpuid generation logic to seed their
information from a featureset. This patch adds the infrastructure to
specify a featureset, and will obtain the appropriate defaults from Xen
if omitted.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We change the xen_version libxc code to use the new hypercall.
Which of course means every user in the code base has to
be changed over.
It is important to note that the xc_version_op has a different
return semantic than the previous one. It returns negative
values on error (like the old one), but it also returns
an positive value on success (unlike the old one). The positive
value is the number of bytes copied in.
Note that both Ocaml and xenstat use tabs instead of four
spaces so they look quite odd.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> [for the Ocaml stubs]
Acked-by: George Dunlap <george.dunlap@eu.citrix.com> [xenctx bits]
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
This was the last component of the osdep infrastructure, so all the
dynamic loading etc stuff all falls away too.
As part of this I was forced to investigate the twisty
xc_map_foreign_* maze, which I have added to the
toolstack-library-apis doc in the hopes of doing something sensible.
NetBSD and Solaris now call xc_map_foreign_bulk_compat directly from
their xc_map_foreign_bulk, which could have been achieved by using
some ifdefs around a renamed function. This will fall out in the wash
when these functions move to their own library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With the addition of HVMlite the hypervisor now always requires a non-null
arch domain config, which is different between HVM and PV guests.
Add a new parameter to xc_domain_create that contains a pointer to an arch
domain config. If the pointer is null, create a default arch domain config
based on guest type.
Fix all the in-tree callers to provide a null arch domain config in order to
mimic previous behaviour.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
According to public/sched.h, there is a new shutdown_reason called
soft_reset. Propagate that value to ocaml.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
As defined by the Xen public header the fifth value of
shutdown_reason is watchdog.
Signed-off-by: Simon Rowe <simon.rowe@eu.citrix.com>
Acked-by: David Scott <dave@recoil.org>
The Ocaml stub to retrieve the hypervisor console ring had a few problems.
* A single 32k buffer would truncate a large console ring.
* The buffer was static and not under the protection of the Ocaml GC lock so
could be clobbered by concurrent accesses.
* Embedded NUL characters would cause caml_copy_string() (which is strlen()
based) to truncate the buffer.
The function is rewritten from scratch, using the same algorithm as the python
stubs, but uses the protection of the Ocaml GC lock to maintain a static
running total of the ring size, to avoid redundant realloc()ing in future
calls.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Dave Scott <dave.scott@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
by using the flag and the new cpumap arguments introduced in
the parameters of the DOMCTL_{get,set}_vcpuaffinity hypercalls.
Now, both xc_vcpu_setaffinity() and xc_vcpu_getaffinity() have
a new flag parameter, to specify whether the user wants to
set/get hard affinity, soft affinity or both. They also have
two cpumap parameters instead of only one. This way, it is
possible to set/get both hard and soft affinity at the same
time (and, in case of set, each one to its own value).
In xc_vcpu_setaffinity(), the cpumaps are IN/OUT parameters,
as it is for the corresponding arguments of the
DOMCTL_set_vcpuaffinity hypercall. What Xen puts there is the
hard and soft effective affinity, that is what Xen will actually
use for scheduling.
In-tree callers are also fixed to cope with the new interface.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The various cpuid functions are not available on ARM, so this
makes them raise an OCaml exception. Omitting the functions
completely results in a link failure in oxenstored due to the
missing symbols, so this is preferable to the much bigger patch
that would result from adding conditional compilation into the
OCaml interfaces.
With this patch, oxenstored can successfully start a domain on
Xen/ARM.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Roger Pau Monné
Ian Jackson
Andrew Cooper
Christian Lindig
John Thomson
Wei Liu
Jon Ludlam
Zhongze Liu
Konrad Rzeszutek Wilk
Ian Campbell
Simon Rowe
Tiejun Chen
Olaf Hering
Dario Faggioli
Anil Madhavapeddy