Instead of setting the PKG_CONFIG_DIR make variable in each library
Makefile do it in tools/Makefile and stubdom/Makefile globally.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
LDLIBS_* and SHLIB_* settings in tools/Rules.mk are sometimes missing
some SHDEPS_* added to them.
Add the missing flags, even if sometimes being empty.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 78fb69ad9 ("tools/Rules.mk: Properly handle libraries with
recursive dependencies.") introduced a copy and paste error in
tools/Rules.mk:
LDLIBS_libxenstore and SHLIB_libxenstore don't use SHDEPS_libxenstore
but SHDEPS_libxenguest. This will add a superfluous dependency of
libxenstore on libxenevtchn.
Correct this bug.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A typo was made in 7a6de259f.
Currently libxlutil lives in the same directory as libxl, fixing this
issue causes no functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
The mov to/from cr/dr behave as if they were encoded with Mod = 3. When
encoded with Mod != 3, no displacement or SIB bytes are fetched.
Add a test with a deliberately malformed ModRM byte. (Also add the
automatically-generated simd.h to .gitignore.)
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
Just like for SSE/SSE2, MMX insns aren't being covered at all, as
they're not easy to deal with: The compiler refuses to emit such for
other than uses of built-in functions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... and their AVX equivalents. Note that a few instructions aren't
covered (yet), but those all fall into common pattern groups, so I
would hope that for now we can do with what is there.
MMX insns aren't being covered at all, as they're not easy to deal
with: The compiler refuses to emit such for other than uses of built-in
functions.
The current way of testing AVX insns is meant to be temporary only:
Once we fully support that feature, the present tests should rather be
replaced than full ones simply added.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Previously supported insns are being converted to the new model, and
several new ones are being added.
To keep the stub handling reasonably simple, integrate SET_SSE_PREFIX()
into copy_REX_VEX(), at once switching the stubs to use an empty REX
prefix instead of a double DS: one (no byte registers are being
accessed, so an empty REX prefix has no effect), except (of course) for
the 32-bit test harness build.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This aims at covering most MMX/SSEn/AVX instructions in the 0x0f-escape
space with memory operands. Not covered here are irregular moves,
converts, and {,U}COMIS{S,D} (modifying EFLAGS).
Note that the distinction between simd_*_fp isn't strictly needed, but
I've kept them as separate entries since in an earlier version I needed
them to be separate, and we may well find it useful down the road to
have that distinction.
Also take the opportunity and adjust the vmovdqu test case the new
LDDQU one here has been cloned from: To zero a ymm register we don't
need to go through hoops, as 128-bit AVX insns zero the upper portion
of the destination register, and in the disabled AVX2 code there was a
wrong YMM register used.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Copy the one in libxl, remove the irrelevant bits about libxl. Replace
libxl with xl where appropriate.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When calling configure for qemu provide the local pkg-config directory
in order to let the configure process find the libxenctrl version.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of using the downloaded git tree as target directory for the
qemu build create a dedicated directory for that purpose.
This way it is possible to use the same source directory of qemu to
configure and build qemu upstream in a stubdom environment in future.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When configuring the build of qemu the configure script is building
various test programs to determine the exact version of libxencontrol.
Instead of a try and error approach needing updates for nearly each
new version of Xen just provide xencontrol.pc to be used via
pkg-config.
In the end we need two different variants of that file: one for the
target system where eventually someone wants to build qemu, and one
for the local system to be used for building qemu as part of the Xen
build process.
The local variant is created in a dedicated directory in order to be
able to collect more pkg-config files used for building tools there.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Some libc headers don't have O_CLOEXEC, we need to take care of it by
defining to 0 (on the ground that such glibc might barf on O_CLOEXEC).
Fixes e7745d8ef5 ("tools/libxendevicemodel: introduce a Linux-specific
implementation")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We record trace information about the next timeslice when
switching to a different vcpu, but not when continuing to
run the same cpu:
csched2:schedule cpu 9, rq# 1, idle, SMT idle, tickled
csched2:runq_candidate d0v3, 0 vcpus skipped, cpu 9 was tickled
sched_switch prev d32767v9, run for 991.186us
sched_switch next d0v3, was runnable for 2.515us, next slice 10000.0us
sched_switch prev d32767v9 next d0v3 ^^^^^^^^^^^^^^^^^^^^
runstate_change d32767v9 running->runnable
...
csched2:schedule cpu 2, rq# 0, busy, not tickled
csched2:burn_credits d1v5, credit = 9996950, delta = 502913
csched2:runq_candidate d1v5, 0 vcpus skipped, no cpu was tickled
runstate_continue d1v5 running->running
?????????????
This information is quite useful; so add a trace including
that information on the 'continue_running' path as well,
like this:
csched2:schedule cpu 1, rq# 0, busy, not tickled
csched2:burn_credits d0v8, credit = 9998645, delta = 12104
csched2:runq_candidate d0v8, credit = 9998645, 0 vcpus skipped, no cpu was tickled
sched_switch continue d0v8, run for 1125.820us, next slice 9998.645us
runstate_continue d0v8 running->running ^^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
When traversing a Credit2 runqueue to select the
best candidate vCPU to be run next, show in the
trace which vCPUs we consider.
A bit verbose, but quite useful, considering that
we may end up looking at, but then discarding, one
of more vCPU. This will help understand which ones
are skipped and why.
Also, add how much credits the chosen vCPU has
(in the TRC_CSCHED2_RUNQ_CANDIDATE record). And,
while there, fix a bug in tools/xentrace/formats
(still in the output of TRC_CSCHED2_RUNQ_CANDIDATE).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
As a memory report can now be triggered via XS_CONTROL support via
command line and signal handler is no longer needed. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a XS_CONTROL command to xenstored for doing a talloc report to a
file. Right now this is supported by specifying a command line option
when starting xenstored and sending a signal to the daemon to trigger
the report.
To dump the report to the standard log file call:
xenstore-control memreport
To dump the report to a new file call:
xenstore-control memreport <file>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Today Xenstore supports logging only if specified at start of the
Xenstore daemon. As it can't be disabled during runtime it is not
recommended to start xenstored with logging enabled.
Add support for switching logging on and off at runtime and to
specify a (new) logfile. This is done via the XS_CONTROL wire command
which can be sent with xenstore-control.
To switch logging on just use:
xenstore-control log on
To switch it off again:
xenstore-control log off
To specify a (new) logfile:
xenstore-control logfile <file>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The Xenstore protocol supports the XS_CONTROL command for triggering
various actions in the Xenstore daemon. Enhance that support by using
a command table and adding a help function.
Support multiple control commands in the associated xenstore-control
program used to issue XS_CONTROL commands.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Move the XS_CONTROL handling of xenstored to a new source file
xenstored_control.c.
In order to avoid making get_string() in xenstored_core.c globally
visible use strlen() instead, which is save in this context due to
xs_count_strings() before returned a value > 1.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
In preparation to support other than pure debug functionality via the
Xenstore XS_DEBUG wire command rename it to XS_CONTROL and make
XS_DEBUG an alias of it.
Add an alias xs_control_command for the associated xs_debug_command,
too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
After splitting out all the meaty bits, xl_cmdimpl.c doesn't contain
much. Merge the rest into xl.c and delete the file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Include COLO / Remus code because they are built on top of the existing
migration protocol.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add some function declarations to xl.h because they are now needed in
multiple files.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Including create, reboot, shutdown, pause, unpause and destroy.
Lift a bunch of core data structures and function declarations to xl.h
because they are needed in both xl_cmdimpl.c and xl_vmcontrol.c.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A collections of functions that don't warrant their own files.
Moving main_devd there requires lifting do_daemonize to xl_utils.c.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The new file also contains code for channel, which is just a console
in disguise.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We will need to move main_vncviewer to a different file where it has no
access to the helper vncviewer.
Call libxl_vncviewer_exec directly.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Juergen Gross
Wei Liu
Zhang Chen
Jan Beulich
Andrew Cooper
Olaf Hering
Anthony PERARD
Dario Faggioli
Roger Pau Monne