Add --replace-escape option to xenconsoled, which replaces ESC with
'.' in console output written to log file. This makes it slightly safer
to do tail -f on a console output of untrusted guest.
The pty output is unaffected by this option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: move variables into a narrower scope ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Unilaterally making string.h a prerequisite for console.h is going to
break build for a lot of consumers of console.h.
Define a macro for the new flex ring. Consumers which want to use it
should define the macro.
Partially revert af8d935641.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch finally adds the support for vuart console. It adds
two new fields in the console initialization:
- optional
- use_gnttab
optional flag tells whether the console is optional.
use_gnttab tells whether the ring buffer should be allocated using
grant table.
The VUART console is enabled ony for ARM.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch adds the support for multiple consoles and introduces the
iterator functions to operate on multiple consoles.
The functions called by the iterators check that they are operating
on valid I/O parameters. This ensures that if a particular console is
not initialized then the functions will not do anything for that
console type.
This patch is in preparation to support a new vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new handle_console_ring function. This function
reads the data from the ring buffer on receiving an event.
The initialization of event channel poll fd to -1 is moved inside the
handle_console_ring function as they are related. There should be no
change in the behavior as there is no functional change.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_evtchn_unmask function. This function
unmasks the console event channel if it is masked for some timeout
period.
One optimization that has been done is to merge the two for loops.
One for loop was used to iterate through all domains and
unmask the domain event channels which had been rate limited for a
specified duration.
The other for loop was run to add the event channel fd and the tty fd to
the poll list.
These two for loops were merged so that the these operations can be done
in one iteration instead of two iterations.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_tty_fd function. This function
adds the tty fd to the list of polled fds.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new maybe_add_console_evtchn_fd function. This
function adds the console event channel FD to list of polled FDs.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces a new console_init function. This function
initializes the console structure.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole functions take domain structure as input. These functions shall be
modified to take console structure as input since these functions typically perform
console specific operations.
Also the console specific functions starting with prefix "domain_" shall be modified
to "console_" to indicate that these are console specific functions.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The console->conspath name is changed to console->xspath as it is
clear from the name that it is referring to xenstore path.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xenconsole uses a domain structure which contains console specific fields. This
patch defines a new console structure, which would be used by the xenconsole
functions to perform console specific operations like reading/writing data from/to
the console ring buffer or reading/writing data from/to console tty.
This patch is in preparation to support multiple consoles to support vuart console.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEFINE_XEN_FLEX_RING(xencons) defines common helper functions such as
xencons_queued() to tell the current size of the ring buffer,
xencons_mask() to mask off the index, which are useful helper functions.
pl011 emulation code will use these helper functions.
io/console.h includes io/ring.h which defines DEFINE_XEN_FLEX_RING.
In console/daemon/io.c, string.h had to be included before io/console.h
because ring.h uses string functions.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Place the PID file under XEN_RUN_DIR by default. Note this change the
default location from /var/run to /var/run/xen.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise the name clashes with the libxc evtchn_compat use of the
name (which is compat, so can't really change), and triggers an error
with older gcc relating to redefining typedefs (which are not allowed
per the spec, but which are tolerated by newer gcc)
None of qemu-trad, qemu-xen or mini-os actually use this type, so this
should be fine. Note that the library API is not actually stable until
4.7 is releases.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All other error paths in the infinite loop in handle_io use break, so
as to free resources.
CID: 1351226
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxengnttab will provide a stable API and ABI for accessing the
grant table devices.
The functions are moved into the xengnt{tab,shr} namespace to make a
clean break from libxc and avoid ambiguity regarding which interfaces
are stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_GNTTAB_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few grant table related functions which go via privcmd
(GNTTABOP) rather than ioctls on the /dev/xen/gnt* devices in
libxenctrl. Specifically:
- xc_gnttab_get_version
- xc_gnttab_map_table_v1
- xc_gnttab_map_table_v2
- xc_gnttab_op
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels.
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
After this change libxenvchan no longer needs to link against
libxenctrl. It still needs xenctrl.h in one file for xen_mb and
friends.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
libxenevtchn will provide a stable API and ABI for accessing the
evtchn device.
The functions are moved into the xenevtchn namespace to make a clean
break from libxc and avoid ambiguity regarding which interfaces are
stable.
All in-tree users are updated to use the new names.
Upon request (via #define XC_WANT_COMPAT_EVTCHN_API) libxenctrl will
provide a compat API for the old names. This is used by qemu-xen for
the time being. qemu-xen-traditional is updated in lockstep.
This leaves a few event channel related functions which go via privcmd
(EVTCHNOP) rather than ioctls on the /dev/xen/evtchn device in
libxenctrl. Specifically:
- xc_evtchn_alloc_unbound
- xc_evtchn_reset
- xc_evtchn_status
Note that xc_evtchn_alloc_unbound's functionality is also provided by
xenevtchn_bind_unbound_port() (née xc_evtchn_bind_unbound_port) and is
probably redundant.
These functions do not appear to be needed by qemu-dm, qemu-pv
(provision of device model to HVM guests and PV backends respectively)
or by libvchan suggesting they are not needed by non-toolstack uses of
event channels. QEMU does use these in hw/xenpv/xen_domainbuild.c but
that is a "toolstack use".
The new library uses a version script to ensure that only expected
symbols are exported and to version them such that ABI guarantees can
be kept in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
Previously, xenconsoled's daemonize function would do nothing if its
parent process is init (as it is under systemd but not sysv init).
This is confusing. Instead, always daemonize when asked to, but use the
"interactive" switch when running from the systemd service.
Because a pidfile is only written when daemonizing, drop the pidfile
parameters from the service file (systemd keeps track of the pids
anyway).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Linux may not use the same page granularity as Xen. This will result to
a domain crash because it will try to map more page than required.
As the console page size will always be equal to a Xen page size, use
XC_PAGE_SIZE.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XenServer's VM density testing uncovered a regression when moving from
sysvinit to systemd where the file descriptor limit dropped from 4096 to
1024. (XenServer had previously inserted a ulimit statement into its
initscripts.)
One solution is to use LimitNOFILE=4096 in xenconsoled.service to match the
lost ulimit, but that is only a stopgap solution.
As Xenconsoled genuinely needs a large number of file descriptors if a large
number of domains are running, attempt to increase the limit.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
When xenconsoled starts, there will be log lines in the Xen console ring from
boot, even though VIRQ_CON_RING is not yet pending.
Add a force option to handle_hv_logs() which bypasses the event channel check,
allowing xenconsoled to drain the Xen boot messages when it starts, rather
than at the first subsequent time that VIRQ_CON_RING becomes set.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The size of the Xen console ring is runtime configurable, so the statically
sized 16k buffer is not necessarily sufficient. Make repeated
xc_readconsolering() hypercalls while Xen managed to completely fill the
provided buffer.
Also, change the buffer to being static to save on stack space.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This is a regression introduced by
"Switch from select() to poll() in xenconsoled's IO loop."
hg c/s 26405:7359c3122c5d
git cc5434c933
which results in reliable segfaults during VM power operations.
Switch to calloc(3) in an effort to avoid similar problems with changes in the
future.
Signed-off-by: Marcus Granado <marcus.granado@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Grant references for the xenstore and xenconsole shared pages exist, but
currently only xenstore uses these references. Change the xenconsole
daemon to prefer using the grant reference over map_foreign_range when
mapping the shared console ring.
This allows xenconsoled to be run in a domain other than dom0 if set up
correctly - for libxl, the xenstore path /tool/xenconsoled/domid
specifies the domain containing xenconsoled.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In Linux select() typically supports up to 1024 file descriptors. This can be
a problem when user tries to boot up many guests. Switching to poll() has
minimum impact on existing code and has better scalibility.
pollfd array is dynamically allocated / reallocated. If the array fails to
expand, we just ignore the incoming fd.
Updated: reset *_pollfd after use.
This fixes regression 14869.
Also remove unused slave_pollfd in strcut domain.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In Linux select() typically supports up to 1024 file descriptors. This can be
a problem when user tries to boot up many guests. Switching to poll() has
minimum impact on existing code and has better scalibility.
pollfd array is dynamically allocated / reallocated. If the array fails to
expand, we just ignore the incoming fd.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xenconsoled expected domains that are being shutdown to end up in the
the DYING state and would only clean-up such domains. HVM domains
either didn't enter the DYING state or weren't in long enough for
xenconsoled to notice.
For every shutdown HVM domain, xenconsoled would leak memory, grow its
list of domains and (if guest console logging was enabled) leak the
log file descriptor. If the file descriptors were leaked and enough
HVM domains were shutdown, no more console connections would work as
the evtchn device could not be opened. Guests would then block
waiting to send console output.
Fix this by tagging domains that exist in enum_domains(). Afterwards,
all untagged domains are assumed to be dead and are shutdown and
cleaned up.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The double indirection has been unnecessary since 9867:ec61a8c25429,
there is no possibility of the buffer being reallocated now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch implements the new protocol for handling pv consoles and
emulated serials as described in the document docs/misc/console.txt.
The changes are:
- xenconsoled: do not write the pty under serial in xenstore if
xenconsoled is handling a consolepath;
- xenconsole: implement support for an explicit console type parameter;
the parameter can be "pv", to specify that the user wants to
connect to a pv console, or "serial", to specify that the user wants to
connect to an emulated serial. If the type parameter hasn't been
specified be the user, xenconsole tries to guess which type of console
it has to connect to, defaulting to pv console for pv guests and
emulated serial for hvm guests.
- xenconsole: use the new xenstore paths;
- libxl: rename libxl_console_constype to libxl_console_consback:
constype is used to to specify whether qemu or xenconsoled provides the
backend, so I renamed it to libxl_console_consback to make it more
obvious that we are talking about backends;
- libxl: add a new libxl_console_constype to specify if the console is
an emulated serial or a pv console;
- libxl: support the new xenconsole "type" command line parameter;
- libxl: use the "output" node under console in xenstore to tell qemu
where do we want the output of this pv console to go;
- remove the legacy "serialpath" from xenconsoled altogether
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also: update the QEMU_TAG to pull in the qemu part of these changes.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
It has been unused since 21732:eb34666befcc.
Removing the include of sys/ptrace.h and threaddb.h exposed a few
places which were using time(2) or gettimeofday(2) without including
time.h or sys/time.h respectively and were relying on an include.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
out of file descriptors meaning new the console of new domains are not
logged.
Seems to have been accidentally removed in 16638:28921e83000b.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
LOG_WARNING (or precisely LOG_DEBUG if -v) would be logged.
xenconsoled only actually logs using LOG_ERR and LOG_DEBUG so for the
most part we would have been logging absolutely nothing up until now.
Linux provides a LOG_UPTO macro but I'm not sure how portable that is
so I have opencoded the list of levels.
Do I get some sort of prize for fixing a bug introduced in 2005?
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Marek Marczykowski-Górecki
Wei Liu
Bhupinder Thakur
Andrew Cooper
Ian Campbell
Ross Lagerwall
Julien Grall
Roger Pau Monne
Daniel De Graaf
Ian Campbell
David Vrabel
Stefano Stabellini
Stefano Stabellini