xs_daemon_tdb() in xs_lib.c is no longer used at all, so it can be
removed. xs_domain_dev() and xs_write_all() are not used by xenstored,
so they can be moved to tools/libs/store/xs.c.
xs_daemon_rootdir() is used by xenstored only and it only calls
xs_daemon_rundir(), so replace its use cases with xs_daemon_rundir()
and remove it from xs_lib.c.
xs_daemon_socket_ro() is needed in libxenstore only, so move it to
tools/libs/store/xs.c.
Move functions used by xenstore-client only to xenstore_client.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
MASK_EXTR() and MASK_INSR() are a matching pair. Keep them together.
Drop the pair from x86-emulate.h which includes common-macros.h.
Fixes: 56a7aaa16b ("tools: add physinfo arch_capabilities handling for Arm")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
On Arm, the SVE vector length is encoded in arch_capabilities field
of struct xen_sysctl_physinfo, make use of this field in the tools
when building for arm.
Create header arm-arch-capabilities.h to handle the arch_capabilities
field of physinfo for Arm.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
clang complains about the signed type:
implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Wsingle-bit-bitfield-constant-conversion]
The potential ABI change in libxenvchan is covered by the Xen version based SONAME.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It previously mimicked the getdomaininfo sysctl semantics by returning
the first domid higher than the requested domid that does exist. This
unintuitive behaviour causes quite a few mistakes and makes the call
needlessly slow in its error path.
This patch removes the fallback search, returning -ESRCH if the requested
domain doesn't exist. Domain discovery can still be done through the sysctl
interface as that performs a linear search on the list of domains.
With this modification the xc_domain_getinfo() function is deprecated and
removed to make sure it's not mistakenly used expecting the old behaviour.
The new xc wrapper is xc_domain_getinfo_single().
All previous callers of xc_domain_getinfo() have been updated to use
xc_domain_getinfo_single() or xc_domain_getinfolist() instead. This also
means xc_dominfo_t is no longer used by anything and can be purged.
Resolves: xen-project/xen#105
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Currently it's hard to get CPU's microcode revision from Xen after late
loading without looking into Xen logs, which is not always convenient.
Add a new platform op in order to get the required data from Xen and
provide a wrapper for libxenctrl.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
It's a stricter version of xc_domain_getinfo() where the returned domid
always matches the requested domid or the error code shows an error instead.
A few patches ahead usages of xc_domain_getinfo() are removed until only
xc_domain_getinfo_single() and xc_domain_getinfolist() remain.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
xc_domain_getinfo() is slow and prone to races because N hypercalls are
needed to find information about N domains. xc_domain_getinfolist() finds
the same information in a single hypercall as long as a big enough buffer
is provided. Plus, xc_domain_getinfo() is disappearing on a future patch
so migrate the callers interested in more than 1 domain to the the *list()
version.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead of having 3 identical copies of the definition of a
container_of() macro in different tools header files, add that macro
to xen-tools/common-macros.h and use that instead.
Delete the other copies of that macro.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Instead of duplicating libxl__device_console_add() work in
init-xenstore-domain.c, just use libxenlight.
This requires to add a small wrapper function to libxenlight, as
libxl__device_console_add() is an internal function.
This at once removes a theoretical race between starting xenconsoled
and xenstore-stubdom, as the old code wasn't using a single
transaction for writing all the entries, leading to the possibility
that xenconsoled would see only some of the entries being written.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
In order to better reflect the contents of the header and to make it
more appropriate to use it for different runtime environments like
programs, libraries, and firmware, rename the libs.h include file to
common-macros.h. Additionally add a comment pointing out the need to be
self-contained.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> # tools/python/xen/lowlevel/xc/xc.c
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
hvm_xs_strings.h specifies xenstore entries which can be used to set or
override smbios strings. hvmloader has support for reading them, but
xl/libxl support is not wired up.
Allow specifying the strings with the new xl.cfg option:
smbios=["bios_vendor=Xen Project","system_version=1.0"]
In terms of strings, the SMBIOS specification 3.5 says:
https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.5.0.pdf
"""
Strings must be encoded as UTF-8 with no byte order mark (BOM). For
compatibility with older SMBIOS parsers, US-ASCII characters should be
used. NOTE There is no limit on the length of each individual text
string. However, the length of the entire structure table (including all
strings) must be reported in the Structure Table Length field of the
32-bit Structure Table Entry Point (see 5.2.1) and/or the Structure
Table Maximum Size field of the 64-bit Structure Table Entry Point (see
5.2.2).
"""
The strings aren't checked for utf-8 or length. hvmloader has a sanity
check on the overall length.
The libxl_smbios_type enum starts at 1 since otherwise the 0th key is
not printed in the json output.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Use actual include directory used to install the public header in
COPYING file.
Also, move the input file out of "tools/include/xen/" because that
directory is removed on `make clean`.
We can't used ./configure because $includedir contain another
variable, so the change is done in Makefile.
Fixes: 4ea75e9a90 ("Rework COPYING installed in /usr/include/xen/, due to several licences")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The existing XEN_DOMCTL_SHADOW_OP_{GET,SET}_ALLOCATION have problems:
* All set_allocation() flavours have an overflow-before-widen bug when
calculating "sc->mb << (20 - PAGE_SHIFT)".
* All flavours have a granularity of 1M. This was tolerable when the size of
the pool could only be set at the same granularity, but is broken now that
ARM has a 16-page stopgap allocation in use.
* All get_allocation() flavours round up, and in particular turn 0 into 1,
meaning the get op returns junk before a successful set op.
* The x86 flavours reject the hypercalls before the VM has vCPUs allocated,
despite the pool size being a domain property.
* Even the hypercall names are long-obsolete.
Implement a better interface, which can be first used to unit test the
behaviour, and subsequently correct a broken implementation. The old
interface will be retired in due course.
The unit of bytes (as opposed pages) is a deliberate API/ABI improvement to
more easily support multiple page granularities.
This is part of XSA-409 / CVE-2022-33747.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
I was really hoping to avoid this, but its now too late in the 4.17 freeze and
we still don't have working fixes.
The in-Xen calculations for assistance capabilities are buggy. For the
avoidance of doubt, the original intention was to be able to control every
aspect of a APIC acceleration so we could comprehensively test Xen's support,
as it has proved to be buggy time and time again.
Even after a protracted discussion on what the new API ought to mean, attempts
to apply it to the existing logic have been unsuccessful, proving that the
API/ABI is too complicated for most people to reason about.
This reverts most of:
2ce11ce2496b2b9b3405
leaving in place the non-APIC specific changes (minimal as they are).
This takes us back to the behaviour of Xen 4.16 where APIC acceleration is
configured on a per system basis.
This work will be revisted in due course.
Fixes: 2ce11ce249 ("x86/HVM: allow per-domain usage of hardware virtualized APIC")
Fixes: 6b2b9b3405 ("x86: report Interrupt Controller Virtualization capabilities")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The notice in the COPYING file in "xen/include/public/COPYING" doesn't
really apply to the files that ultimately are been install at
"/usr/include/xen". The issue are headers in the "sys/" subdirectory
that comes from other projects such as Linux or FreeBSD.
The main issue is that there are two headers that have a different
licence than the MIT licence:
- xen-sys/Linux/gntalloc.h (installed as "sys/gntalloc.h") is public
domain.
- xen-sys/FreeBSD/gntdev.h (installed as "sys/gntdev.h") is BSD-2.
To clarify this, we'll install a COPYING file with a different notice.
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
The headers install in "/usr/include/xen/foreign/" are missing a
licence header. This patch adds a SPDX identifier to clarify that
the MIT licence is used.
The script now check that the licence of the input file is also MIT,
by checking for the presence of the SPDX identifier.
Also add information about which files are used to generate the
headers.
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Today a guest is free to access as many nodes in a single transaction
as it wants. This can lead to unbounded memory consumption in Xenstore
as there is the need to keep track of all nodes having been accessed
during a transaction.
In oxenstored the number of requests in a transaction is being limited
via a quota maxrequests (default is 1024). As multiple accesses of a
node are not problematic in C Xenstore, limit the number of accessed
nodes.
In order to let read_node() detect a quota error in case too many nodes
are being accessed, check the return value of access_node() and return
NULL in case an error has been seen. Introduce __must_check and add it
to the access_node() prototype.
This is part of XSA-326 / CVE-2022-42314.
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Rework "xen-xsm" rules to not have to change directory to run
mkflask.sh, and store mkflask.sh path in a var, and use a full path
for FLASK_H_DEPEND, and output directory is made relative.
Rename "all-y" target to a more descriptive "xen/lib/x86/all".
Removed the "dist" target which was the only one existing in tools/.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
vchan server creates XenStore entries to advertise its event channel and
ring, but those are not removed after the server quits.
Add additional cleanup step, so those are removed, so clients do not try
to connect to a non-existing server.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Dmytro Semenets <dmytro_semenets@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds basic support for configuring and assisting virtio-mmio
based virtio-disk backend (emulator) which is intended to run out of
Qemu and could be run in any domain.
Although the Virtio block device is quite different from traditional
Xen PV block device (vbd) from the toolstack's point of view:
- as the frontend is virtio-blk which is not a Xenbus driver, nothing
written to Xenstore are fetched by the frontend currently ("vdev"
is not passed to the frontend). But this might need to be revised
in future, so frontend data might be written to Xenstore in order to
support hotplugging virtio devices or passing the backend domain id
on arch where the device-tree is not available.
- the ring-ref/event-channel are not used for the backend<->frontend
communication, the proposed IPC for Virtio is IOREQ/DM
it is still a "block device" and ought to be integrated in existing
"disk" handling. So, re-use (and adapt) "disk" parsing/configuration
logic to deal with Virtio devices as well.
For the immediate purpose and an ability to extend that support for
other use-cases in future (Qemu, virtio-pci, etc) perform the following
actions:
- Add new disk backend type (LIBXL_DISK_BACKEND_STANDALONE) and reflect
that in the configuration
- Introduce new disk "specification" and "transport" fields to struct
libxl_device_disk. Both are written to the Xenstore. The transport
field is only used for the specification "virtio" and it assumes
only "mmio" value for now.
- Introduce new "specification" option with "xen" communication
protocol being default value.
- Add new device kind (LIBXL__DEVICE_KIND_VIRTIO_DISK) as current
one (LIBXL__DEVICE_KIND_VBD) doesn't fit into Virtio disk model
An example of domain configuration for Virtio disk:
disk = [ 'phy:/dev/mmcblk0p3, xvda1, backendtype=standalone, specification=virtio']
Nothing has changed for default Xen disk configuration.
Please note, this patch is not enough for virtio-disk to work
on Xen (Arm), as for every Virtio device (including disk) we need
to allocate Virtio MMIO params (IRQ and memory region) and pass
them to the backend, also update Guest device-tree. The subsequent
patch will add these missing bits. For the current patch,
the default "irq" and "base" are just written to the Xenstore.
This is not an ideal splitting, but this way we avoid breaking
the bisectability.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Tested-by: Jiamei Xie <jiamei.xie@arm.com>
Introduce a new per-domain creation x86 specific flag to
select whether hardware assisted virtualization should be used for
x{2}APIC.
A per-domain option is added to xl in order to select the usage of
x{2}APIC hardware assisted virtualization, as well as a global
configuration option.
Having all APIC interaction exit to Xen for emulation is slow and can
induce much overhead. Hardware can speed up x{2}APIC by decoding the
APIC access and providing a VM exit with a more specific exit reason
than a regular EPT fault or by altogether avoiding a VM exit.
On the other hand, being able to disable x{2}APIC hardware assisted
virtualization can be useful for testing and debugging purposes.
Note:
- vmx_install_vlapic_mapping doesn't require modifications regardless
of whether the guest has "Virtualize APIC accesses" enabled or not,
i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long as
virtualize_apic_accesses is supported by the CPU.
- Both per-domain and global assisted_x{2}apic options are not part of
the migration stream, unless explicitly set in the respective
configuration files. Default settings of assisted_x{2}apic done
internally by the toolstack, based on host capabilities at create
time, are not migrated.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.
HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.
HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().
For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.
Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
xc_psr.c:161:5: error: conflicting types for 'xc_psr_cmt_get_data'
due to enum/integer mismatch;
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Allow administrators to notify a frontend driver that it's backend
counterpart is not to be trusted, so the frontend can deploy whatever
mitigations required in order to secure itself.
Allow such option for disk and network frontends only, as those are
the only hardened ones currently supported.
This is part of XSA-403
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
A leading underscore is used to indicate auto generated headers, and
the clean use of 'rm -f _*.h' will remove those. _xen_list.h also
uses a leading underscore, but is checked in the repo and as such
cannot be removed as part of the clean rule.
Fix this by dropping the leading underscore, so that the header is not
removed.
Fixes: a03b3552d4 ('libs,tools/include: Clean "clean" targets')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "cleanlocal" target, we can use
double-colon rules instead.
Generated headers are now in tools/include/, so remove those file
there.
Remove -f flag as it's already in $(RM).
libs.mk:
- don't try to remove "*.rpm" anymore.
libs/light:
- "_paths.*.tmp" isn't created anymore.
- clean "libxenlight_test.so" and "libxl_test_*.opic".
libs/stat:
- don't remove $(DEPS_RM) from here as it is already done in
"libs.mk".
libs/util:
- fix clean of version-script file.
include/xen-foreign:
- remove __pycache__
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Make the do_memory_op function accessible to tools linking with libxc.
Similar functions are already available for both domctl and sysctl. As part
of this patch we also change the input 'cmd' to be unsigned int to accurately
reflect what the hypervisor expects.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add monitor event that hooks the vmexit handler allowing for both sync and
async monitoring of events. With async monitoring an event is placed on the
monitor ring for each exit and the rest of the vmexit handler resumes normally.
If there are additional monitor events configured those will also place their
respective events on the monitor ring.
With the sync version an event is placed on the monitor ring but the handler
does not get resumed, thus the sync version is only useful when the VM is not
expected to resume normally after the vmexit. Our use-case is primarily with
the sync version with VM forks where the fork gets reset after sync vmexit
event, thus the rest of the vmexit handler can be safely skipped. This is
very useful when we want to avoid Xen crashing the VM under any circumstance,
for example during fuzzing. Collecting all vmexit information regardless of
the root cause makes it easier to reason about the state of the VM on the
monitor side, hence we opt to receive all events, even for external interrupt
and NMI exits and let the monitor agent decide how to proceed.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Need to separately specify if the reset is for the memory or for the VM state,
or both.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
There is no user of tools/include/xen-external/* left. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _xentoolcore_list.h and use the common _xen_list.h
instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _libxl_list.h and use the common _xen_list.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Today tools/include contains two basically identical header files
generated from the same source. They just differ by the used name space
and they are being generated from different Makefiles via a perl
script.
Prepare to have only one such header by using a more generic namespace
"XEN" for _xen_list.h.
As the original header hasn't been updated in the Xen tree since its
introduction about 10 years ago, and the updates of FreeBSD side have
mostly covered BSD internal debugging aids, just don't generate the
new header during build, especially as using the current FreeBSD
version of the file would require some updates of the perl script,
which are potentially more work than just doing the needed editing by
hand. Additionally this enables to remove the not needed debugging
extensions of FreeBSD.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Do this before adding any more stuff to xg_cpuid_x86.c.
The placement in xenctrl.h is wrong, as they are implemented by the
xenguest library. Note that xg_cpuid_x86.c needs to include
xg_private.h, and in turn also fix xg_private.h to include
xc_bitops.h. The bitops definition of BITS_PER_LONG needs to be
changed to not be an expression, so that xxhash.h can use it in a
preprocessor if directive.
As a result also modify xen-cpuid to include xenguest.h.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
When a rule isn't a pattern rule, and thus don't have a %, the
value of the automatic variable stem $* depends on .SUFFIXES. GNU make
manual explain that it is better to avoid this "bizarre" behavior
which exist for compatibility.
Use $(basename ) instead. So we can one day avoid make's build-in
rules and variables.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This avoid the need to create the symbolic link "include/asm".
Whenever a comment refer to an "asm" headers, this patch avoid
spelling the arch when not needed to avoid some code churn.
One unrelated change is to sort entries in MAINTAINERS for "INTEL(R)
VT FOR X86 (VT-X)"
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce flag XEN_SYSCTL_PHYSCAP_vpmu which
indicates whether the platform supports vPMU
functionality. Modify Xen and tools accordingly.
Take the opportunity and fix XEN_SYSCTL_PHYSCAP_vmtrace
definition in sysctl.h which wrongly use (1 << 6)
instead of (1u << 6).
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <iwj@xenproject.org>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
_hcbuf_buf1 has been there only for a pointer comparison to validate
type compatibility. The same can be achieved by not using typeof() on
the definition of what so far was _hcbuf_buf2, as the initializer has
to also be type-compatible. Drop _hcbuf_buf1 and the comaprison;
rename _hcbuf_buf2.
Since we're already using compiler extensions here, don't be shy and
also omit the middle operand of the involved ?: operator.
Bring line continuation character placement in line with that of
related macros.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Current unit8_t for pirq argument in this interface is too restrictive
causing failures on modern hardware with lots of GSIs. That extends down to
XEN_DOMCTL_irq_permission ABI structure where it needs to be fixed up
as well.
Internal Xen structures appear to be fine. Existing users of the interface
in tree (libxl, ocaml and python bindings) are currently using signed int
for pirq representation which should be wide enough. Converting them to
uint32_t now is desirable to avoid accidental passing of a negative
number (probably denoting an error code) by caller as pirq, but left for
the future clean up.
Domctl interface version is needed to be bumped with this change but that
was already done by 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1
to uint64_t") in this release cycle.
Additionally, take a change and convert allow_access argument to bool.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Commit 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to
uint64_t") updated the size of the structure vcpu_guest_core_regs and
indirectly vcpu_guest_context.
On Arm, the two structures are only accessible to the tools and the
hypervisor (and therefore stable). However, they are still checked
by the scripts in tools/include/xen-foreign are not able to understand
that.
Ideally we should rework the scripts so we don't have to update
the size for non-stable structure. But I don't have limited time
to spend on the issue. So chose the simple solution and update
the size accordingly.
Note that we need to keep vcpu_guest_core_regs around because
the structure is used by vcpu_guest_context and therefore the
scripts expects the generated header to contain it.
Fixes: 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to uint64_t")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Tested-by: Michal Orzel <michal.orzel@arm.com>
Juergen Gross