Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Preserve existing behaviour: if the option was not given, set existing
defaults for FreeBSD, Solaris and everything else.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Xen is currently installed into /boot, which is a hardcoded path. This
makes it impossible to install two xen.rpm packages from 'make rpmball'
in parallel because rpm complains about conflicting files.
Use BOOT_DIR to define the install path to make it possible to install
xen.gz below --prefix=.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
26470:acaf29203cf9 "tools+stubdom: install under /usr/local by
default" moved more stuff under /usr/local than was desirable.
In particular SYSCONFIG_DIR (configuration for initscripts) moved to
/usr/local/etc/{sysconfig,defaults} while the initscripts themselves
(correctly) remained in /etc/init.d. Moving /etc/xen/scripts breaks
the udev bakcned rules file. Lastly stuff under /var was moved to
/usr/local/var.
Move these back to /etc/ and /var. Moving /etc wholesale rather thsn
just the problematic bits is preferable for consistency.
Although there seems to be some disagreement about /usr/local/var vs
/var using /var is compatible with the FHS and what we think most
people will expect.
Most of this impacts Linux only but NetBSD appears to have been using
/usr/local/var/lib which I have also reset to /var/lib.
Note that we already paid no attention to autoconf --sysconfdir or
--localstatedir ('etc' and 'var' respectively) so there is no change
from that PoV.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Some OSes don't come with wget by default, so ftp should be choosen
on those. Add an autoconf check to check for wget and ftp, and
replace the usage of hardcoded wget in tools.
[ Stubdom builds still use wget unconditionally. -iwj ]
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently shared libraries are automatically installed into /usr/lib
or /usr/lib64, depending on the supplied --prefix value and
$(XEN_TARGET_ARCH). Some systems, like recent Debian and Ubuntu releases,
do not use /usr/lib64, but instead /usr/lib/x86_64-linux-gnu.
With this change, packagers can supply the desired location for shared
libraries on the ./configure command line. Packagers need to note that
the default behaviour on 64-bit Linux systems will be to install shared
libraries in /usr/lib, not /usr/lib64, unless a --libdir value is provided
to ./configure.
Additionally, the libfsimage plugins are now loaded explicitly from
$LIBDIR/fs, removing platform-based decision trees in code.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- resolve rejects in configure by rerunning autogen.sh. Dropped changes
to remove m4/default_lib.m4 and update m4/pkg.m4 since they cause LIBDIR=/lib
instead of /usr/lib. Reran ./autogen.sh after that too ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It is not correct to say -lpthread. The correct option is -pthread,
which may have sundry other effects on code generation etc. It needs
to be passed both to compilation and linking.
Fix the configure test to test -pthread, and plumb the resulting flag
through to PTHREAD_{CFLAGS,LDFLAGS} in Tools.mk; also substitute
PTHREAD_LIBS (although this will currently always be empty).
Remove PTHREAD_LIBS setting from StdGNU.mk.
Fix the one user (libxc) to use PTHREAD_{CFLAGS,LDFLAGS} too.
There are still some other users in tree which pass -pthread or
-lpthread by adding it as a literal to their own compiler options.
These will be fixed in a later patch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Check for a curses compatible library (curses or ncurses basically).
One of those is needed to compile Xen tools (gtraceview and xentop).
Modify Makefiles/sources to use configure output (fetch CURSES_LIBS
from tools/Tools.mk and header to include from tools/config.h)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This involves gathering object files from .asm (which will be binary)
and object files from .c (which will be in LTO format) separately
until the final link.
Only tested for x86_64 Xen builds using Clang/LLVM bitcode; it should be
possible to do the same with newer GCCs and GIMPLE.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Tested with svn snapshot of clang and llvm from 17 February 2011.
Only x86_64 hypervisor builds (make dist-xen clang=y) are supported
and I haven't even begun to look at cross-compiling.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Attached patch makes libxc build again on NetBSD after the recent rework.
[ Modified by iwj:
I changed the name of the new make variable from LIBDL to DLOPEN_LIBS.
The latter conforms to the naming scheme for similar variables found
in config/*.mk - PTHREAD_LIBS et al.
Also I moved the setting of the variable to -dl from Linux to StdGNU
(which makes it apply more widely) and also added it to SunOS.mk
(based on pure guesswork). ]
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce a OS dependent global variable XEN_LOCK_DIR that points at the
system directory that contains lock files.
[fixed up for conflict in Config.mk -iwj]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce CONFIG_LEAF_DIR, SUBSYS_DIR, INITD_DIR variables to cope
better with variation between distributions.
See docs/misc/distro_mapping.txt for details.
Signed-off-by: Bruce Edge <bruce.edge@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Some GNU systems (including Debian) do not use /usr/lib64. This change
makes it easier to have the Xen build system on amd64 put its 64-bit
libraries files in /usr/lib.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
On SuSE the configuration files in /etc/sysconfig/ will be updated in
a smart way from templates found in /var/adm/fillup-templates/
Introduce new variable SYSCONFIG_DIR for Linux installations. Now
only one place needs patching, or it can be specified as option to
make(1).
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove *all* hardcoded "/etc/xen" strings in python code.
Additionally, it removes pygrub_path from osdep.py. Its use has been
replaced with auxbin.pathTo("pygrub").
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
This provides support for building the new merged qemu from
qemu-xen.git, or from a local checkout.
The default is still to use the in-tree version, because the patchman
infrastructure for testing, and propagation from staging to
xen-unstable, needs a small amount of work to cope with git.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In the current tree, setting PREFIX does not work very well. This is
because of confusion about the meaning of LIBDIR. In some places it
is the pathname tail of directories containing libraries (lib, lib64
or lib/amd64). But in other places it is a destination pathname
(implicitly, including any PREFIX). This can result in PREFIX or /usr
being added the wrong number of times.
This patch splits LIBDIR into two variables, LIBLEAFDIR and
LIBDIR. LIBDIR is the directory into which Xen libraries and other
similar code is to be placed, and includes any PREFIX. LIBLEAFDIR is
just the library tail and can be appended to various different
prefixes; for example, to construct the X11 library directory for -L.
Neither variable contains the value of DESTDIR, which is of course
used only to redirect the results of `make install' when desired.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
- Use openpty(), which does the same as the sequence
of open(), grantpt(), unlockpt(), ptsname(), tcgetattr()
simplifies code
- Check return code from tcsetattr()
- sprintf() -> snprintf()
- OpenBSD lacks POSIX grantpt() and unlockpt()
requires use of openpty()
- Solaris lacks POSIX openpty() via feedback from SUN (John Levon)
implement openpty() for Solaris, tested and ok'd by SUN (John
Levon)
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
- convert raw "install" command to use $(INSTALL)
- convert some $(INSTALL) to $(INSTALL_DATA) as appropriate
- modify the specific $(INSTALL) definitions to use -p.
Original patch by Ben Thomas <ben@virtualiron.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
Olaf Hering