Do not expose the ACPI power management "_PS0/3" Method to guest
firmware. According to section 3.4 of the APCI specification 4.0, PCI
device control the device power through its own specification but not
through APCI.
Qemu pushes "_PS0/3" to guest will cause a mess between ACPI PM and
PCI PM as a result of incorrect ACPI table shipped with the guest
BIOS, it may cause a failure of PCI device PM state transition(from
PCI_UNKNOWN to PCI_D0).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Haitao Shan <haitao.shan@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
Unfortunately a HID of PNP0A06 will not work for an existing client
driver so this patch aims to choose something that's pretty certain
not to class with anything else.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
and populate it at boot time with a value read from
"platform/generation_id". Also add code to libxl to populate this
xenstore key with the value of a new 'generation_id' parameter in the
VM config file. Populate the ADDR package of VM_Gen_Counter ACPI
device such that the first integer evaluates to the low order 32 bits
of the buffer address and the second integer evaluates to the high
order 32 bits of the buffer address.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
evaluating to two integers, and with _CID and _DDN set to
"VM_Gen_Counter".
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Introduce acpi_s3 and acpi_s4 configuration options (default=1). The
S3 and S4 packages are moved into separate SSDTs and their inclusion
is controlled by the new configuration options.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This avoids a conflict with SeaBIOS's memory management. Moreover
there is no reason that acp_info must live below 1MB, and moving it
out actually simplifies our code.
Signed-off-by: Keir Fraser <keir@xen.org>
In order to have two different DSDT tables for rombios and SeaBIOS,
this patch introduce a new parameter to acpi_build_tables() which
contain the DSDT table to load.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The ACPI PIIX4 device in QEMU upstream as not the same behavior to
handle PCI hotplug. This patch introduce the necessary change to the
DSDT ACPI table to behave as expceted by the new QEMU.
To switch to this new DSDT table version, there is a new option
--dm-version to mk_dsdt.
Change are inspired by SeaBIOS DSDT source code.
There is few things missing with the new QEMU:
- QEMU provide the plugged/unplugged status only per slot (and not
per func like qemu-xen-traditionnal.
- I did not include the _STA ACPI method that give the status of a
device (present, functionning properly) because qemu-xen does not
handle it.
- I did not include the _RMV method that say if the device can be
removed,
because the IO port of QEMU that give this status always return
true. In
SeaBIOS table, they have a specific _RMV method for VGA, ISA that
return
false. But I'm not sure that we can do the same in Xen.
So, the only way to remove a device is from outside of the guest (like
with xl pci-detatch), and can not be initiated from inside.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Use __attribute__((format(printf,..))) for the function _stmt to
prevent any mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch move the IO port range reservation from the dsdt.asl to
mk_dsdt. This IO port range need to be generated by mk_dsdt, because
qemu-xen use different port. The IO port for qemu-xen will be added in
a later patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
With this new option, there is no need to compile mk_dsdt for each
DSDT table that we want. The Makefile is a bit reorganize to handle
this new option and to prepare more change in a coming patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
In particular the madt_lapic0_addr and madt_csum_addr fields are
filled in while building the tables.
This fixes a bluescreen on shutdown with certain versions of Windows.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christoph Egger <Christoph.Egger@amd.com>
Tested-and-acked-by: Christoph Egger <Christoph.Egger@amd.com>
When booting a Windows guest, the OS report an issue with the ACPI (in
a BSOD). The exact issue is "SCI_EN never becomes set in PM1 Control
Register." (quoted from WinDbg help).
So this patch enables the flags SCI_EN if it is not yet enabled.
Reported-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
I mistakenly thought that the "struct bios_info" was a ROMBIOS
specific data structure and so caused it to be populated only in the
ROMBIOS case.
However it turns out that the majority of the struct's fields are
actually referenced from the ACPI DSDT and hence are needed for
SeaBIOS too.
While in principal it might have been possible to continue to mix
ROMBIOS and ACPI bits in this datastructure this is, evidently,
confusing but also leads to header file dependencies from
ROMBIOS->hvmloader which I had been hoping to avoid so as to head-off
future accidental re-entanglement of ROMBIOS and hvmloader.
So instead I have split the ACPI parts into a new "struct acpi_info"
which is defined entirely within the acpi building code in hvmloader
and which comes with a big comment pointing to the DSDT interaction.
This new ACPI info is placed at 0x9F000 which is available under both
ROMBIOS and SeaBIOS. This address is in a reserved region of the E820
and is just above the ROMBIOS stack.
The resulting "struct rombios_info" is hardly worthy of its own
structure but keep it anyway.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Rather than building the tables twice, once purely to figure out the
size, just allocate each individual table as we go.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Windows SVVP tests require an HPET table even if the HPET is disabled.
This makes sense since the HPET _is_ in the DSDT and, while the OS
does not know that, in principle it's status may change.
(For what it's worth SeaBIOS, in addition to doing this, totally
ignores QEMU's -no-hpet flag and always reports 0x0f for the HPET's
_STA method).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Instead of hardcoding in a header.
Reduces the cross talk between ROMBIOS and hvmloader.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
It's not needed unless you are including headers in the current
directory _and_ you can't use "" instead of <> because the headers are
to be installed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
This change some fadt values -- the address of the acpi ioports -- and
the pm1a_evt_address value wrote for the pci bus.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
As part of the QEMU/Xen merge, this patch comes to change the value of
sleep states and add some information in the PCI registers to match the
implementation of the BIOS of QEMU.
It also does a hypercall (HVM_PARAM_ACPI_IOPORTS_LOCATION) that tell the
Xen to use the new Port I/O instead of the old one.
[ Also, in this patch, update QEMU_TAG to the qemu-xen revision
with the corresponding qemu change. -iwj ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
...because the default timesource (TSC) drifts under load.
The flag is only defined in ACPI 3.0, and we provide ACPI 2.0 tables,
but Windows seems happy enough to obey it anyway.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Fix an ACPI asl bug by explicitly convert PRS to buffer, otherwise PRS
would be parsed as integer if less than 32/64 bits (according to ACPI
1.0 or 2.0).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Move processor from \_PR to \_SB. ACPI processor can be defined
under \_PR or \_SB. However, recently os like linux 2.6.30/32 support
cpu hotplug better for \_SB processor object.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Make build.c dependency on ssdt_{pm,tpm}.h explicit, else they can be
built in the wrong order.
Also, improve naming of target DSDT structures, and specify -p option
to iasl so that all generated files for a given target have
target-unique names, hence build can proceed safely in parallel.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Deploy this smaller DSDT where possible: this is required to boot
Windows 2000, which only supports up to 15 processors and will blue
screen if it sees more processor objects than that (even inactive
ones).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
It's big and small changes generate huge diffs. People building the
firmware will have to ensure they have iasl installed.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
By merging PRSC and NTFY methods we simplify the code, improve
efficiency, and fix a bug where PRSC iterated 0-255 but NTDY could
only handle CPU numbers 0-127.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Fix it by telling OSPM don't power down vga card on entering S3
state. The trick works for XP and Windows2003, but Vista still refuse
to allow S3.
It is picked from kvm-userdapce.git commit 60e85d, author "Gleb
Natapov".
Signed-off-by: Yu Ke <ke.yu@intel.com>
accordingly
-- currently firmware has got 'vcpus' from xend, this patch add parse
'vcpu_avail' to firmware;
-- setup madt 'lapic' subitems of processors accoring to vcpus and
vcpu_avail which finally come from config;
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In order to support HVM vcpu add/remove, we need set dsdt
infrastructure.
-- By using mk_dsdt.c, it auto-produce related asl code when
compiling.
-- It define processor related objects and control methods (_MAT,
_EJ0, _STA, etc).
-- It also define GPE _L02 and Notify control method for SCI
interrupt, which will trigger HVM acpi driver to add/remove cpu.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
At the same time, replace a lengthy linear GPE notification method,
with a logarithmic binary chop. Based on a patch by Simon Horman.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch adds the ACPI fixed hardware power button for HVM.
It enables a graceful shutdown of a guest OS by direction of Dom0.
(if a proper action for the power button is set inside the guest)
usage:
xm trigger <Domain> power
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Now there are two control registers plus one register for
each of the 32 PHP slots. A total of 34 registers. Accordingly the
ioport space required has expanded by from 3 to 34 bytes.
Signed-off-by: Simon Horman <horms@verge.net.au>
hvmloader acpi: Use If and Else instead of Switch
Signed-off-by: Simon Horman <horms@verge.net.au>
Xudong Hao
Paul Durrant
Keir Fraser
Anthony PERARD
Andrew Cooper
Ian Campbell
Paolo Bonzini
Keir Fraser