Introduce a way to create different cpupools at boot time, this is
particularly useful on ARM big.LITTLE system where there might be the
need to have different cpupools for each type of core, but also
systems using NUMA can have different cpu pools for each node.
The feature on arm relies on a specification of the cpupools from the
device tree to build pools and assign cpus to them.
ACPI is not supported for this feature.
With this patch, cpupool0 can now have less cpus than the number of
online ones, so update the default case for opt_dom0_max_vcpus.
Documentation is created to explain the feature.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
This commit introduces a new arm-specific flag CDF_directmap to specify
that a domain should have its memory direct-map(guest physical address
== host physical address) at domain creation.
Also, add a directmap flag under struct arch_domain and use it to
reimplement is_domain_direct_mapped.
For now, direct-map is only available when statically allocated memory is
used for the domain, that is, "xen,static-mem" must be also defined in the
domain configuration.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Since the introduction of UEFI boot for Xen, the legacy
compatible strings were not supported and the stub code
was checking only the presence of “multiboot,module” to
require the Xen UEFI configuration file or not.
The documentation was not updated to specify that behavior.
Add a phrase to docs/misc/arm/device-tree/booting.txt
to clarify it.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add support to load Dom0 boot modules from
the device tree using the xen,uefi-binary property.
Update documentation about that.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch introduces the support for dom0less configuration
when using UEFI boot on ARM, it permits the EFI boot to
continue if no dom0 kernel is specified but at least one domU
is found.
Introduce the new property "xen,uefi-binary" for device tree boot
module nodes that are subnode of "xen,domain" compatible nodes.
The property holds a string containing the file name of the
binary that shall be loaded by the uefi loader from the filesystem.
Introduce a new call efi_check_dt_boot(...) called during EFI boot
that checks for module to be loaded using device tree.
Architectures that don't support device tree don't have to
provide this function.
Update efi documentation about how to start a dom0less
setup using UEFI
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
[stefano: drop inline from efi_check_dt_boot]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
This is a follow-up of
"b6fe410 xen/arm: Add handling of extended regions for Dom0"
Add various in-code comments, update Xen hypervisor device tree
bindings text, change the log level for some prints and clarify
format specifier, reuse dt_for_each_range() to avoid open-coding
in find_memory_holes().
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
[stefano: fix typos]
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce the xen,uefi-cfg-load DT property of /chosen
node for ARM whose presence decide whether to force
the load of the UEFI Xen configuration file.
The logic is that if any multiboot,module is found in
the DT, then the xen,uefi-cfg-load property is used to see
if the UEFI Xen configuration file is needed.
Modify a comment in efi_arch_use_config_file, removing
the part that states "dom0 required" because it's not
true anymore with this commit.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Static Allocation refers to system or sub-system(domains) for which memory
areas are pre-defined by configuration using physical address ranges.
Those pre-defined memory, -- Static Memory, as parts of RAM reserved in the
beginning, shall never go to heap allocator or boot allocator for any use.
Memory can be statically allocated to a domain using the property "xen,static-
mem" defined in the domain configuration. The number of cells for the address
and the size must be defined using respectively the properties
"#xen,static-mem-address-cells" and "#xen,static-mem-size-cells".
The property 'memory' is still needed and should match the amount of memory
given to the guest. Currently, it either comes from static memory or lets Xen
allocate from heap. *Mixing* is not supported.
The static memory will be mapped in the guest at the usual guest memory
addresses (GUEST_RAM0_BASE, GUEST_RAM1_BASE) defined by
xen/include/public/arch-arm.h.
This patch introduces this new `xen,static-mem` feature, and also documents
and parses this new attribute at boot time.
This patch also introduces a new field "bool xen_domain" in "struct membank"
to tell whether the memory bank is reserved as the whole hardware resource,
or bind to a xen domain node, through "xen,static-mem"
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The binding for the dom0less module does not match Xen implementation.
Any module should contain the compatible "multiboot,module" to be
recognized.
This was clearly an oversight as other examples with Xen code base
provide the compatible "multiboot,module".
So fix the binding and the example associated to it.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Extend the existing device tree based multiboot protocol to include
information regarding multiple domains to boot.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
This patch updates the documentation for allowing detection of an XSM
module that lacks a specific compatible string.
This mechanism has been added by the commit
ca32012341.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Create a DT for Dom0 for ACPI-case only. DT contains minimal required
information such as Dom0 bootargs, initrd, efi description table and
address of uefi memory table.
Also document this device tree bindings of "hypervisor" and
"hypervisor/uefi" node.
Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org>
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
When a device is marked for passthrough (via the new property
"xen,passthrough"), dom0 must not access to the device (i.e not
loading a driver), but should be able to manage the MMIO/interrupt
of the passthrough device.
The latter part will allow the toolstack to map MMIO/IRQ when a device
is pass through to a guest.
The property "xen,passthrough" will be translated as 'status="disabled"'
in the device tree to avoid DOM0 using the device. We assume that DOM0 is
able to cope with this property (already the case for Linux, and
required by ePAPR).
Rework the function map_device (renamed into handle_device) to:
* For a given device node:
- Give permission to manage IRQ/MMIO for this device
- Retrieve the IRQ configuration (i.e edge/level) from the device
tree
* When the device is not marked for guest passthrough:
- Assign the device to the guest if it's protected by an IOMMU
- Map the IRQs and MMIOs regions to the guest
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When using a multiboot capable bootloader this is exactly the field which
should be used.
Replace the deprecation wording with a reference to the information on the
priority of the bootargs fields.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
It is the compatible string which matters, not the absolute path, and in any
case /chosen/module@N is more often used than /chosen/modules/module@N.
Reported-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.gral@linaro.org>
The chosen node's bootargs property should be used for Xen if there is a dom0
kernel multiboot module with a command line, not just if xen,dom0-bootargs is
present.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.linaro.org>
Currently we use the chosen/bootargs property as the Xen commandline
and rely on xen,dom0-bootargs for Dom0. However this brings issues
with bootloaders, which usually build bootargs by bootscripts for a
Linux kernel - and not for the entirely different Xen hypervisor.
Introduce a new possible device tree property "xen,xen-bootargs"
explicitly for the Xen hypervisor and make the selection of which to
use more fine grained:
- If xen,xen-bootargs is present, it will be used for Xen.
- If xen,dom0-bootargs is present, it will be used for Dom0.
- If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is,
bootargs will be used for Xen. Like the current situation.
- If no Xen specific properties are present, bootargs is for Dom0.
- If xen,xen-bootargs is present, but xen,dom0-bootargs is missing,
bootargs will be used for Dom0.
The aim is to allow common bootscripts to boot both Xen and native
Linux with the same device tree blob. If needed, one could hard-code
the Xen commandline into the DTB, leaving bootargs for Dom0 to be set
by the (non Xen-aware) bootloader.
I will send out a appropriate u-boot patch, which writes the content
of the "xen_bootargs" environment variable into the xen,xen-bootargs
dtb property.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The bootloader should populate /chosen/modules/module@<N>/ for each
module it wishes to pass to the hypervisor. The content of these nodes
is described in docs/misc/arm/device-tree/booting.txt
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Luca Fancellu
Stefano Stabellini
Oleksandr Tyshchenko
Penny Zheng
Julien Grall
Shannon Zhao
Fu Wei
Julien Grall
Ian Campbell
Andre Przywara