With the introduction of boot time cpupools, Xen can create many
different cpupools at boot time other than cpupool with id 0.
Since these newly created cpupools can't have an
entry in Xenstore, create the entry using xen-init-dom0
helper with the usual convention: Pool-<cpupool id>.
Given the change, remove the check for poolid == 0 from
libxl_cpupoolid_to_name(...).
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
When firing special watches (e.g. "@releaseDomain"), they will be
regarded to be valid children of the "/" node. So a domain having
registered a watch for "/" and having the privilege to receive
the special watches will receive those special watch events for the
registered "/" watch.
Fix that by calling the related fire_watches() with the "exact"
parameter set to true, causing a mismatch for the "/" node.
Reported-by: Raphael Ning <raphning@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Raphael Ning <raphning@amazon.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The reference "to shadow the resident processes" is applicable to
domains (potentially) running in shadow mode only. Adjust the
calculations accordingly. This, however, requires further parameters.
Since the original function is deprecated anyway, and since it can't be
changed (for being part of a stable ABI), introduce a new (internal
only) function, with the deprecated one simply becoming a wrapper.
In dom0_paging_pages() also take the opportunity and stop open-coding
DIV_ROUND_UP().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
PCI device assignment to an HVM with stubdom is potentially racy. First
the PCI device is assigned to the stubdom via the PV PCI protocol. Then
QEMU is sent a QMP command to attach the PCI device to QEMU running
within the stubdom. However, the sysfs entries within the stubdom may
not have appeared by the time QEMU receives the device_add command
resulting in errors like:
libxl_qmp.c:1838:qmp_ev_parse_error_messages:Domain 10:Could not open '/sys/bus/pci/devices/0000:00:1f.3/config': No such file or directory
This patch retries the device assignment up to 10 times with a 1 second
delay between. That roughly matches the overall hotplug timeout for
pci_add_timeout. pci_add_timeout's initialization is moved to
do_pci_add since retries call into pci_add_qmp_device_add again.
The qmp_ev_parse_error_messages error is still printed since it happens
at a lower level than the pci code controlling the retries. With that,
the "Retrying PCI add %d" message is also printed at ERROR level to
clarify what is happening.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Setting errno to a negative value makes no sense.
Fixes: e78e8b9bb6 ("libxl: Add interface for querying hypervisor about PCI topology")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Setting errno to a negative error value makes no sense.
Fixes: cb99a64029 ("libxc: arm: allow passing a device tree blob to the guest")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The claimed reason for setting errno to -1 is wrong. On x86
xc_domain_pod_target() will set errno to a sane value in the error
case.
Fixes: ff1745d588 ("tools: libxl: do not set the PoD target on ARM")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Setting errno to a negative value makes no sense.
Fixes: 6b6500b3cb ("tools/libs/evtchn: Add support for restricting a handle")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current vif and vcpupin parse tests are out of sync. First of all, xl
returns 1 on failure, so replace the expected error code.
Secondly fix the expected output from some vif tests, as xl will no
longer print the unpopulated fields.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prevent the assembler from creating a .note.gnu.property section on
the output objects, as it's not useful for firmware related binaries,
and breaks the resulting rombios image.
This requires modifying the cc-option Makefile macro so it can test
assembler options (by replacing the usage of the -S flag with -c) and
also stripping the -Wa, prefix if present when checking for the test
output.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Setting the fcf-protection=none option in EMBEDDED_EXTRA_CFLAGS in the
Makefile doesn't get it propagated to the subdirectories, so instead
set the flag in firmware/Rules.mk, like it's done for other compiler
flags.
Fixes: 3667f7f8f7 ('x86: Introduce support for CET-IBT')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
I've observed this failed assertion:
libxl_event.c:2057: libxl__ao_inprogress_gc: Assertion `ao' failed.
AFAICT, this is happening in qmp_proxy_spawn_outcome where
sdss->qmp_proxy_spawn.ao is NULL.
The out label of spawn_stub_launch_dm() calls qmp_proxy_spawn_outcome(),
but it is only in the success path that sdss->qmp_proxy_spawn.ao gets
set to the current ao.
qmp_proxy_spawn_outcome() should instead use sdss->dm.spawn.ao, which is
the already in-use ao when spawn_stub_launch_dm() is called. The same
is true for spawn_qmp_proxy().
With this, move sdss->qmp_proxy_spawn.ao initialization to
spawn_qmp_proxy() since its use is for libxl__spawn_spawn() and it can
be initialized along with the rest of sdss->qmp_proxy_spawn.
Fixes: 83c845033d ("libxl: use vchan for QMP access with Linux stubdomain")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
If domain_soft_reset_cb can't rename the save file, it doesn't call
initiate_domain_create() and calls domcreate_complete().
Skipping initiate_domain_create() means dcs->console_wait is
uninitialized and all 0s.
We have:
domcreate_complete()
libxl__xswait_stop()
libxl__ev_xswatch_deregister().
The uninitialized slotnum 0 is considered valid (-1 is the invalid
sentinel), so the NULL pointer path to passed to xs_unwatch() which
segfaults.
libxl__ev_xswatch_deregister:watch w=0x12bc250 wpath=(null) token=0/0: deregister slotnum=0
Move dcs->console_xswait initialization into the callers of
initiate_domain_create, do_domain_create() and do_domain_soft_reset(),
so it is initialized along with the other dcs state.
Fixes: c57e6ebd8c ("(lib)xl: soft reset support")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl__stubdomain_is_linux can take a const pointer, so make the change.
This isn't an issue in-tree, but was found with an OpenXT patch where it
was called with only const libxl_domain_build_info available.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
commit babde47a3f "introduce a 'passthrough' configuration option to
xl.cfg..." moved the pci list parsing ahead of the global pci option
parsing. This broke the global pci configuration options since they
need to be set first so that looping over the pci devices assigns their
values.
Move the global pci options ahead of the pci list to restore their
function.
Fixes: babde47a3f ("introduce a 'passthrough' configuration option to xl.cfg...")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
I can't see why these would want / need to suppress testing of the
register forms of the insns. Quite likely a copy-and-paste oversight
when originally creating the table.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While benign (because only the decoder is exercised here, whereas a
wrong EVEX.W would cause an exception only during actual emulation),
let's still have correct information in the table entries.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use both ZLIB_CFLAGS and ZLIB_LIBS instead of cherry-picking flags
from a single "ZLIB" variable.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CET Indirect Branch Tracking is a hardware feature designed to provide
forward-edge control flow integrity, protecting against jump/call oriented
programming.
IBT requires the placement of endbr{32,64} instructions at the target of every
indirect call/jmp, and every entrypoint.
However, the default -fcf-protection=branch places an endbr{32,64} on every
function which far more than necessary, and reduces the quantity of protection
afforded. Therefore, we use manual placement using the cf_check attribute.
It is necessary to check for both compiler and assembler support, as the
notrack prefix can be emitted in certain cases.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
It's the 'addr' input to mmap(), and currently consuming stack rubble.
Coverity-ID: 1500115
Fixes: c7a7f14b92 ("tests/resource: Extend to check that the grant frames are mapped correctly")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Prevent libxl from creating guests that attempts to use PoD together
with an IOMMU, even if no devices are actually assigned.
While the hypervisor could support using PoD together with an IOMMU as
long as no devices are assigned, such usage seems doubtful. There's no
guarantee the guest has PoD no longer be active, and thus a later
assignment of a PCI device to such domain could fail.
Preventing the usage of PoD together with an IOMMU at guest creation
avoids having to add checks for active PoD entries in the device
assignment paths.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
In case Xenstore is detecting a malicious ring page modification (e.g.
an invalid producer or consumer index set by a guest) it will ignore
the connection of that guest in future.
Add a new error field to the ring page indicating that case. Add a new
feature bit in order to signal the presence of that error field.
Move the ignore_connection() function to xenstored_domain.c in order
to be able to access the ring page for setting the error indicator.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Despite their suffixes these aren't scalar instructions, and hence the
128- and 256-bit EVEX forms may not be used without AVX512VL. Gcc11 ends
up generating such instances for simd-sg.c.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The Feb 2022 microcode from Intel retrofits AMD's MSR_SPEC_CTRL.PSFD interface
to Sunny Cove (IceLake) and later cores.
Update the MSR_SPEC_CTRL emulation, and expose it to guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
While in principle it would be nice to keep leaf 7 in order, that would
involve having an extra 5 words of zeros in a featureset.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This MSR needs to be identical across the system for TSX to have identical
behaviour everywhere. Furthermore, its CPUID bit (SRBDS_CTRL) shouldn't be
visible to guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
... with AS_HELP_STRING as the former is obsolete according
to GNU autoconf 2.67 documentation.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Some libs' Makefile aren't loading the dependencies files *.d2.
We can load them from "libs.mk" as none of the Makefile here are
changing $(DEPS) or $(DEPS_INCLUDE) so it is fine to move the
"include" to "libs.mk".
As a little improvement, don't load the dependencies files (and thus
avoid regenerating the *.d2 files) during `make clean`.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no user of tools/include/xen-external/* left. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Instead of including xen-external/bsd-sys-queue.h use the header
_xen_list.h in minios.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _xentoolcore_list.h and use the common _xen_list.h
instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Remove generating _libxl_list.h and use the common _xen_list.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Today tools/include contains two basically identical header files
generated from the same source. They just differ by the used name space
and they are being generated from different Makefiles via a perl
script.
Prepare to have only one such header by using a more generic namespace
"XEN" for _xen_list.h.
As the original header hasn't been updated in the Xen tree since its
introduction about 10 years ago, and the updates of FreeBSD side have
mostly covered BSD internal debugging aids, just don't generate the
new header during build, especially as using the current FreeBSD
version of the file would require some updates of the perl script,
which are potentially more work than just doing the needed editing by
hand. Additionally this enables to remove the not needed debugging
extensions of FreeBSD.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It was Xen 4.14 where CPUID data was added to the migration stream, and 4.13
that we need to worry about with regards to compatibility. Xen 4.12 isn't
relevant.
Expand and correct the commentary.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
If we are in libxl_list_vcpu() and we are returning NULL, let's avoid
touching the output parameter *nr_vcpus_out, which the caller should
have initialized to 0.
The current behavior could be problematic if are creating a domain and,
in the meantime, an existing one is destroyed when we have already done
some steps of the loop. At which point, we'd return a NULL list of vcpus
but with something different than 0 as the number of vcpus in that list.
And this can cause troubles in the callers (e.g., nr_vcpus_on_nodes()),
when they do a libxl_vcpuinfo_list_free().
Crashes due to this are rare and difficult to reproduce, but have been
observed, with stack traces looking like this one:
#0 libxl_bitmap_dispose (map=map@entry=0x50) at libxl_utils.c:626
#1 0x00007fe72c993a32 in libxl_vcpuinfo_dispose (p=p@entry=0x38) at _libxl_types.c:692
#2 0x00007fe72c94e3c4 in libxl_vcpuinfo_list_free (list=0x0, nr=<optimized out>) at libxl_utils.c:1059
#3 0x00007fe72c9528bf in nr_vcpus_on_nodes (vcpus_on_node=0x7fe71000eb60, suitable_cpumap=0x7fe721df0d38, tinfo_elements=48, tinfo=0x7fe7101b3900, gc=0x7fe7101bbfa0) at libxl_numa.c:258
#4 libxl__get_numa_candidate (gc=gc@entry=0x7fe7100033a0, min_free_memkb=4233216, min_cpus=4, min_nodes=min_nodes@entry=0, max_nodes=max_nodes@entry=0, suitable_cpumap=suitable_cpumap@entry=0x7fe721df0d38, numa_cmpf=0x7fe72c940110 <numa_cmpf>, cndt_out=0x7fe721df0cf0, cndt_found=0x7fe721df0cb4) at libxl_numa.c:394
#5 0x00007fe72c94152b in numa_place_domain (d_config=0x7fe721df11b0, domid=975, gc=0x7fe7100033a0) at libxl_dom.c:209
#6 libxl__build_pre (gc=gc@entry=0x7fe7100033a0, domid=domid@entry=975, d_config=d_config@entry=0x7fe721df11b0, state=state@entry=0x7fe710077700) at libxl_dom.c:436
#7 0x00007fe72c92c4a5 in libxl__domain_build (gc=0x7fe7100033a0, d_config=d_config@entry=0x7fe721df11b0, domid=975, state=0x7fe710077700) at libxl_create.c:444
#8 0x00007fe72c92de8b in domcreate_bootloader_done (egc=0x7fe721df0f60, bl=0x7fe7100778c0, rc=<optimized out>) at libxl_create.c:1222
#9 0x00007fe72c980425 in libxl__bootloader_run (egc=egc@entry=0x7fe721df0f60, bl=bl@entry=0x7fe7100778c0) at libxl_bootloader.c:403
#10 0x00007fe72c92f281 in initiate_domain_create (egc=egc@entry=0x7fe721df0f60, dcs=dcs@entry=0x7fe7100771b0) at libxl_create.c:1159
#11 0x00007fe72c92f456 in do_domain_create (ctx=ctx@entry=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, restore_fd=restore_fd@entry=-1, send_back_fd=send_back_fd@entry=-1, params=params@entry=0x0, ao_how=0x0, aop_console_how=0x7fe721df10f0) at libxl_create.c:1856
#12 0x00007fe72c92f776 in libxl_domain_create_new (ctx=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, ao_how=ao_how@entry=0x0, aop_console_how=aop_console_how@entry=0x7fe721df10f0) at libxl_create.c:2075
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Tested-by: James Fehlig <jfehlig@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
As of SDM revision 076 there is a CPUID bit for this functionality. Use
it to amend the existing model-based logic.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
By writing an empty "hotplug-status" xenstore node in the backend path
libxl can force Linux netback to wait for hotplug script execution
before proceeding to the 'connected' state.
This is required so that netback doesn't skip state 2 (InitWait) and
thus blocks libxl waiting for such state in order to launch the
hotplug script (see libxl__wait_device_connection).
Reported-by: James Dingwall <james-xen@dingwall.me.uk>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: James Dingwall <james-xen@dingwall.me.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
check_store() has an incomplete error handling: it doesn't check
whether "root" allocation succeeded, and it is leaking the memory of
"root" in case create_hashtable() fails.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The DEFINE_HASHTABLE_* macros are used nowhere, so drop them.
The usage intro isn't really needed either.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
When realloc()ing the hashtable for expanding it, zero out all the new
bytes at the end of the table, not only one byte for each new element.
Fixes: 186f0e02a1 ("Added hashtable implementation")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Instead of calculating the length of all help output and then
allocating the space for it, just use talloc_asprintf_append() to
expand the text as needed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Do this before adding any more stuff to xg_cpuid_x86.c.
The placement in xenctrl.h is wrong, as they are implemented by the
xenguest library. Note that xg_cpuid_x86.c needs to include
xg_private.h, and in turn also fix xg_private.h to include
xc_bitops.h. The bitops definition of BITS_PER_LONG needs to be
changed to not be an expression, so that xxhash.h can use it in a
preprocessor if directive.
As a result also modify xen-cpuid to include xenguest.h.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
It is possible now to delete minios_evtchn_close_fd() and the extern
declaration of event_queue.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
libgnttab is using implementation details of Mini-OS. Change that by
letting libgnttab use the new alloc_file_type() and get_file_from_fd()
functions and the generic dev pointer of struct file from Mini-OS.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Luca Fancellu
Juergen Gross
Jan Beulich
Jason Andryuk
Roger Pau Monné
Anthony PERARD
Andrew Cooper
Michal Orzel
Dario Faggioli