Right now only docker is supported, when using the containerize script
for building inside containers. Enable podman as well.
Note that podman can be use in rootless mode too, but for that to work
the files /etc/subuid and /etc/subgid must be properly configured.
For instance:
dario@localhost> cat /etc/subuid
dario:100000:65536
dario@localhost:> cat /etc/subgid
dario:100000:65536
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Paul Durrant <paul@xen.org>
Recent version of QEMU will not build anymore if Python < 3.5.
That is, QEMU 4.3 not released yet.
That check would also prevent the GitLab CI from building QEMU if
python3 binary isn't present.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
10s is too low for the clang tests, this is the output from a clang
test:
(XEN) [ 6.512748] ***************************************************
(XEN) [ 6.513323] SELFTEST FAILURE: CORRECT BEHAVIOR CANNOT BE GUARANTEED
(XEN) [ 6.513891] ***************************************************
(XEN) [ 6.514469] 3... 2... 1...
(XEN) [ 9.520011] *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) [ 9.544319] Freed 488kB init memory
--- Xen Test Framework ---
Environment: HVM 32bit (PAE 3 levels)
Hello World
Test result: SUCCESS
(XEN) [ 9.610977] Hardware Dom0 halted: halting machine
As can be seen from the output above booting Xen and the XTF test
takes ~10s, without accounting for the time it takes for QEMU to
initialize.
Increase the timeout to 30s to be on the safe side.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
Enable Xen timestamps in the automated Xen tests, this is helpful in
order to figure out if Xen is stuck or just slow in the automated
tests.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
A recent rebuild of the CI contaniers switched from Fedora 29 to 30 because
the dockerfile is targetting latest.
Unfortunately, the version of iPXE in master doesn't build with the default
GCC in Fedora 30, which is blocking all CI activity.
Switch from latest to an explicit version, to avoid future breakage.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
Using clang and lld 8 requires installing the packages from the
official llvm apt repositories, so modify the Debian Docker files for
stretch and unstable to add the llvm repo and install clang and lld
from it.
Also add some jobs to test building Xen with clang 8 and lld.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
`git rev-list` can fail if the base..tip range contains invalid
commit(s). If that happens ret never gets a chance to be set.
Set ret before hand to fix the issue.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
CentOS 6 is probably the most frequently broken build, so adding it to CI
would be a very good move.
One problem is that CentOS 6 comes with Python 2.6, and Qemu requires 2.7.
There appear to be no sensible ways to get Python 2.7 into a CentOS 6
environments, so modify the build script to skip the Qemu upstream build
instead. Additionally, SeaBIOS requires GCC 4.6 or later, so skip it as well.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The script is mostly indented with spaces, but there are three tabs. Fix them
up to be consistent.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Previously it is disabled because the embedded ipxe can't be built
with clang. Now that ipxe is split out we can use --with-system-ipxe
to work around the issue.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Make qemu-smoke-x86-64.sh take a variant argument. Make two new tests
in test.yaml.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Currently randconfig tests are more likely to fail than to succeed
because of a bug in xen's build system: symbols-dummy.o's dependency
is wrong, which causes it to not get rebuild between runs, which
eventually causes linking to fail. There may also be other corner
cases we haven't discovered.
The fix is not straightforward. For now, make sure the tree is cleaned
properly between builds so we don't see random failures in Gitlab CI.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
This patch introduces a new test stage into the pipeline and provides
a simple QEMU based smoke test.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
... so that it can be passed on to test stage.
Note that xen is only extracted for x86_64 build since others may not
have that. Use a directory to account for possibly different file
names on Arm.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
This aids troubleshooting when we notice a failure in the default
configuration.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
The restrictions are mostly from Travis CI days when cross-compilation
was not feasible. Now we will be building natively on Arm, remove
those lines.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
Introduce a new directory to put in configs we care about. Modify
build script to build with those configs.
While we only introduce x86 configs initially, provision for non-x86
configs.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
Sometimes it is handy to create a container and play with its setup
manually as root.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Doug Goldstein <cardoe@cardoe.com>
By default the container runs as the root user and since the source tree
is bind mounted into the container, any file is created and owned by the
root user which harms ergonomics when working outside of the container
environment. This maps the root user within the container to the uid of
the user outside of the container so files are not owned by root.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This was something that existed for some scripting support for a totally
unrelated project and when I copied this script I failed to remove it so
this removes it. Build containers for Xen are best as ephemeral
environments and should just utilizes Docker's default container naming
behavior.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Standardized all the environment variable names that the containerize
script uses to start with CONTAINER_
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This image will always track the latest CentOS 7.x release. Add this
container to containerize for easy access.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This adds a script that can be used to do builds easily within the
defined containers under the automation directory. These containers live
in the public GitLab registry under the xen-project namespace. The
script can be executed a number of ways but the default is to drop you
at a bash shell within a Debian Stretch container at the top level of
the source tree.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
a75703b2f0 unconditionally enabled
building of rombios and stubdoms but unfortunately these two pieces do
not build successfully with clang. rombios unconditionally depends on
the build of iPXE and upstream iPXE does not support building with
clang. Similiarly the build of the stubdoms depends on the build of
newlib which does not support being built with clang.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Added a GitLab CI config which has a lot more flexibility to allow us to
test a lot more distro configurations than Travis can and even build
test on FreeBSD. This includes a modified copy of scripts/travis-build
that is expected to diverge future over time as we build more than what
Travis is currently building.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Dario Faggioli
George Dunlap
Anthony PERARD
Roger Pau Monne
Andrew Cooper
Wei Liu
Doug Goldstein