In do_domain_soft_reset(), a `libxl__domain_suspend_state' is used
without been properly initialised and disposed of. This lead do a
abort() in libxl due to the `dsps.qmp' state been used before been
initialised:
libxl__ev_qmp_send: Assertion `ev->state == qmp_state_disconnected || ev->state == qmp_state_connected' failed.
Once initialised, `dsps' also needs to be disposed of as the `qmp'
state might still be in the `Connected' state in the callback for
libxl__domain_suspend_device_model(). So this patch adds
libxl__domain_suspend_dispose() which can be called from the two
places where we need to dispose of `dsps'.
This is XSA-368.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Tested-by: Olaf Hering <olaf@aepfle.de>
master commit: dae3c3e8b2
master date: 2021-03-18 14:56:33 +0100
In order to safely disable some features by default, without breaking
migration from 4.13 or older, the CPUID logic needs to distinguish the two
cases.
Plumb a restore boolean down from the two callers of libxl__cpuid_legacy() all
the way down into xc_cpuid_apply_policy().
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
Pre Xen-4.14 streams will not contain any CPUID/MSR information. There is
nothing libxc can do about this, and will have to rely on the higher level
toolstack to provide backwards compatibility.
To facilitate this, extend the static_data_done() callback, highlighting the
missing information, and modify libxl to use it. At the libxc level, this
requires an arch-specific hook which, for now, always reports CPUID and MSR as
missing. This will be adjusted in a later change.
No overall functional change - this is just plumbing.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
CPUID handling needs to be earlier in construction. Move it from its current
position in libxl__build_post() to libxl__build_pre() for fresh builds, and
libxl__srm_callout_callback_static_data_done() for the migration/resume case.
Later changes will make the migration/resume case conditional on whether CPUID
data was present in the migration stream, and the libxc layer took care of
restoring it.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This will be needed shortly to provide backwards compatiblity for migration
streams which do not have CPUID information contained within them.
No functional change yet.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch creates an appropriate command line for the QEMU instance
running in a Linux-based stubdomain.
NOTE: a number of items are not currently implemented for Linux-based
stubdomains, such as:
- save/restore
- QMP socket
- graphics output (e.g., VNC)
Signed-off-by: Eric Shelton <eshelton@pobox.com>
Simon:
* fix disk path
* fix cdrom path and "format"
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
[drop Qubes-specific parts]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Allow setting stubdomain_ramdisk independently from stubdomain_kernel
Add a qemu- prefix for qemu-stubdom-linux-{kernel,rootfs} since stubdom
doesn't convey device-model. Use qemu- since this code is qemu specific.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Do not prohibit anymore using stubdomain with qemu-xen.
To help distingushing MiniOS and Linux stubdomain, add helper inline
functions libxl__stubdomain_is_linux() and
libxl__stubdomain_is_linux_running(). Those should be used where really
the difference is about MiniOS/Linux, not qemu-xen/qemu-xen-traditional.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
To fix CPUID handling, libxl__build_pre() is going to have to distinguish
between a brand new VM vs one which is being migrated-in/resumed.
Transcribe dcs->restore_fd into dbs->restore in initiate_domain_create()
only (specifically avoiding the stubdom state in libxl__spawn_stub_dm()).
While tweaking initiate_domain_create(), make a new dbs alias and simplify
later code, and drop the local restore_fd alias as the new dbs->restore is
more intuitive in context.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
... and, if it is not created, make the top level 'device' node in
xenstore writable by the guest instead.
The purpose and semantics of the suspend event channel node are explained
in xenstore-paths.pandoc [1]. It was originally introduced in xend by
commit 17636f47a4 "Teach xc_save to use event-channel-based domain
suspend if available.". Note that, because, the top-level frontend
'device' node was created writable by the guest in xend, there was no
need to explicitly create the 'suspend-event-channel' node as a writable
node.
However, libxl creates the 'device' node as read-only by the guest and so
explicit creation of the 'suspend-event-channel' node is necessary to make
it usable. This unfortunately has the side-effect of making some old
Windows PV drivers [2] cease to function. This is because they scan the top
level 'device' node, find the 'suspend' node and expect it to contain the
usual sub-nodes describing a PV frontend. When this is found not to be the
case, enumeration ceases and (because the 'suspend' node is observed before
the 'vbd' node) no system disk is enumerated. Windows will then crash with
bugcheck code 0x7B (missing system disk).
This patch adds a boolean 'xend_suspend_evtchn_compat' field into
libxl_create_info and a similarly named option in xl.cfg to set it.
If the value is true then the xenstore node is not created. Instead the
old xend behaviour of making top level device node writable by the guest is
re-instated. If the value is false (the default) then the current libxl
behaviour persists.
xenstore-paths.pandoc is also modified to say that the suspend event
channel node may not exist and, if it does not exist, then the guest may
create it. A note is also added concerning the writability of the top
level device node.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/xenstore-paths.pandoc;hb=HEAD#l177
[2] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/5/html/para-virtualized_windows_drivers_guide/sect-para-virtualized_windows_drivers_guide-installing_and_configuring_the_para_virtualized_drivers-installing_the_para_virtualized_drivers
NOTE: While adding the new LIBXL_HAVE_CREATEINFO_... definition into
libxl.h, this patch corrects the previous stanza which erroneously
implies libxl_domain_create_info is a function.
Signed-off-by: Paul Durrant <paul@xen.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In case of errors, we immediately call domcreate_complete()
which cleans up the console_xswait object. Make sure it is initialized
before we start cleanup.
Signed-off-by: Paweł Marczewski <pawel@invisiblethingslab.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the path doesn't become available after LIBXL_INIT_TIMEOUT
seconds, fail the domain creation.
If we skip the bootloader, the TTY path will be set by xenconsoled.
However, there is no guarantee that this will happen by the time we
want to call the console_available callback, so we have to wait.
Signed-off-by: Paweł Marczewski <pawel@invisiblethingslab.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds a 'domid' field to libxl_domain_create_info and then
modifies libxl__domain_make() to have Xen use that value if it is valid.
If the domid value is invalid then Xen will choose the domid, as before,
unless the value is the new special RANDOM_DOMID value added to the API.
This value instructs libxl__domain_make() to choose a random domid value
for Xen to use.
If Xen determines that a domid specified to or chosen by
libxl__domain_make() co-incides with an existing domain then the create
operation will fail. In this case, if RANDOM_DOMID was specified to
libxl__domain_make() then a new random value will be chosen and the create
operation will be re-tried, otherwise libxl__domain_make() will fail.
After Xen has successfully created a new domain, libxl__domain_make() will
check whether its domid matches any recently used domid values. If it does
then the domain will be destroyed. If the domid used in creation was
specified to libxl__domain_make() then it will fail at this point,
otherwise the create operation will be re-tried with either a new random
or Xen-selected domid value.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This function implements a file-based lock with a file name generated
from a domid.
This patch splits it into two, generalising the core of the locking code
into a new libxl__lock_file() function which operates on a specified file,
leaving just the file name generation in libxl__domain_userdata_lock().
This patch also generalises libxl__unlock_domain_userdata() to
libxl__unlock_file() and modifies all call-sites.
Suggested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The 'soft reset' code path in libxl__domain_make() is currently taken if a
valid domid is passed into the function. A subsequent patch will enable
higher levels of the toolstack to determine the domid of newly created or
restored domains and therefore this criteria for choosing 'soft reset'
will no longer be usable.
This patch adds an extra boolean option to libxl__domain_make() to specify
whether it is being invoked in soft reset context and appropriately
modifies callers to choose the right value. To facilitate this, a new
'soft_reset' boolean field is added to struct libxl__domain_create_state
and the 'domid_soft_reset' field is renamed to 'domid' in anticipation of
its wider remit. For the moment do_domain_create() will always set
domid to INVALID_DOMID and hence we can add an assertion into
libxl__domain_create() that, if it is not called in soft reset context,
the passed in domid is exactly that value.
Whilst in the neighbourhood, some checks of 'restore_fd > -1' have been
replaced by 'restore_fd >= 0' to be more conventional and consistent with
checks of 'restore_fd < 0'.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently both xl and libxl have internal definitions of INVALID_DOMID
which happen to be identical. However, for the purposes of describing the
behaviour of libxl_domain_create_new/restore() it is useful to have a
specified invalid value for a domain id.
This patch therefore moves the libxl definition from libxl_internal.h to
libxl.h and removes the internal definition from xl_utils.h. The hardcoded
'-1' passed back via domcreate_complete() is then updated to INVALID_DOMID
and comment above libxl_domain_create_new/restore() is accordingly
modified.
NOTE: The value of INVALID_DOMID (~0) is distinct from the hypervisor's
DOMID_INVALID. This patch preserves that value.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
To fix CPUID handling, libxl__build_pre() is going to have to distinguish
between a brand new VM vs one which is being migrated-in/resumed.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We are going to want to call this from a site which has a domid which
is good for logging but not the domid of the domain we are creating
(namely, the stub device domain).
Consequently, add the same comment to
libxl__arch_passthrough_mode_setdefault.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty. We actually need all of
the following to be specifiable:
* "default": enable PT iff we have devices to
pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.
Defaulting and error checking should be done in libxl. So, we make
several changes here.
We introduce "enabled", and rename "unknown" to "default".
We move all of the error checking and defaulting code from xl into
libxl. Now, libxl__domain_config_setdefault has all of the necessary
information to get this right. So we can do it all there. Choosing
the specific mode is arch-specific.
We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).
xl now only has to parse the enum in the same way as it parses all
other enums.
This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified. We restore this behaviour.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien@xen.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Andrew Cooper <Andrew.Cooper3@citrix.com>
CC: Paul Durrant <pdurrant@gmail.com>
CC: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
We need this before we start to figure out the passthrough mode.
I have checked that nothing in libxl__domain_create_info_setdefault
nor the two implementations of ..._arch_... accesses anything else,
other than (i) the domain type (which this function is responsible for
setting and nothing before it looks at) (ii) c_info->ssidref (which is
defaulted by flask code near the top of
libxl__domain_config_setdefault and not accessed afterwards).
So no functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
No functional change. This will let us refer to it in code we are
about to add to this function.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
No functional change. This will let us make it into a pointer without
textual change other than to the definition.
While we are here, fix some style errors (missing { }).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
These are now redundant because shadow_memkb and iommu_memkb are now
defaulted automatically by libxl_domain_need_memory and
libxl_domain_create etc. Callers should not now call these; instead,
they should just let libxl take care of it.
libxl_get_required_shadow_memory was introduced in f89f555827
"remove late (on-demand) construction of IOMMU page tables"
We can freely remove it because it was never in any release.
libxl_get_required_shadow_memory has been in libxl approximately
forever. It should probably not have survived the creation of
libxl_domain_create, but it seems the API awkwardnesses we see in
recent commits prevented this. So we have to keep it. It remains
functional but we can deprecate it. Hopefully we can get rid of it
completely before we find the need to change the calculation to use
additional information which its arguments do not currently supply.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Defaulting is supposed to be done by libxl. So these calculations
should be here in libxl. libxl__domain_config_setdefault has all the
necessary information including the values of max_memkb and max_vcpus.
The overall functional effect depends on the caller:
For xl, no change. The code moves from xl to libxl.
For callers who set one or both shadow_memkb and iommu_memkb (whether
from libxl_get_required_shadow_memory or otherwise) before calling
libxl_domain_need_memory (any version): the new code will leave their
setting(s) unchanged.
For callers who do not call libxl_domain_need_memory at all, and who
fail to set one of these memory values: now they are both are properly
set. The shadow and iommu memory to be properly accounted for as
intended.
For callers which call libxl_domain_need_memory and request the
current API (4.13) or which track libxl, the default values are also
now right and everything works as intended.
For callers which call libxl_domain_need_memory, and request an old
pre-4.13 libxl API, and which leave one of these memkb settings unset,
we take special measures to preserve the old behaviour.
This means that they don't get the additional iommu memory and are at
risk of the domain running out of memory as a result of f89f555827
"remove late (on-demand) construction of IOMMU page tables". But this
is no worse than the state just after f89f555827, which already
broke such callers in that way. This is perhaps justifiable because
of the API stability warning next to libxl_domain_need_memory.
An alternative would be to drop the special-casing of these callers.
That would cause a discrepancy between libxl_domain_need_memory and
libxl_domain_create: the former would not include the iommu memory and
the latter would. That seems worse, but it's debateable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Break out this into a new function. We are going to want to call it
from a new call site.
Unfortunately not all of the defaults can be moved into the new
function without changing the order in which things are done. That
does not seem wise at this stage of the release. The effect is that
additional calls to libxl__domain_config_setdefault (which are going
to be introduced) do not quite set everything. But they will do what
is needed. After Xen 4.13 is done, we should move those settings into
the right order.
No functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
From CODING_STYLE:
Every indented statement is braced, but blocks that contain just one
statement may have the braces omitted. To avoid confusion, either all
the blocks in an if...else chain have braces, or none of them do.
CC: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
...if there is no IOMMU or it is globally disabled.
Without this patch, the following assertion may be hit:
xl: libxl_create.c:589: libxl__domain_make: Assertion `info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN' failed.
This is because libxl__domain_create_info_setdefault() currently only sets
an appropriate value for 'passthrough' in the case that 'cap_hvm_directio'
is true, which is not the case unless an IOMMU is present and enabled in
the system. This is normally masked by xl choosing a default value, but
that will not happen if xl is not used (e.g. when using libvirt) or when
a stub domain is being created.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is mostly a cosmetic patch to avoid the default enumeration value
being 'enabled'. The only non-cosmetic parts are in xl_parse.c where it now
becomes necessary to explicitly parse the 'enabled' value for xl.cfg
'passthrough' option, and error on the value 'unknown', because there is no
longer a direct mapping between valid xl.cfg values and the enumeration.
Suggested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
...and hence the ability to disable IOMMU mappings, and control EPT
sharing.
This patch introduces a new 'libxl_passthrough' enumeration into
libxl_domain_create_info. The value will be set by xl either when it parses
a new 'passthrough' option in xl.cfg, or implicitly if there is passthrough
hardware specified for the domain.
If the value of the passthrough configuration option is 'disabled' then
the XEN_DOMCTL_CDF_iommu flag will be clear in the xen_domctl_createdomain
flags, thus allowing the toolstack to control whether the domain gets
IOMMU mappings or not (where previously they were globally set).
If the value of the passthrough configuration option is 'sync_pt' then
a new 'iommu_opts' field in xen_domctl_createdomain will be set with the
value XEN_DOMCTL_IOMMU_no_sharept. This will override the global default
set in iommu_hap_pt_share, thus allowing the toolstack to control whether
EPT sharing is used for the domain.
If the value of passthrough is 'enabled' then xl will choose an appropriate
default according to the type of domain and hardware support.
NOTE: The 'iommu_memkb' overhead in libxl_domain_build_info will now only
be set if passthrough is 'sync_pt' (or xl has chosen this mode as
a default).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl__qmp_initializations is part of the device domain startup, it
queries information about the newly spawned QEMU and do some
post-startup configuration. So the function call doesn't belong to the
general domain creation, but only to the device model part of the
process, thus the call belong to libxl_dm and libxl__dm_spawn_state's
machinery.
We move the call ahead of a follow-up patch which going to "inline"
libxl__qmp_initializations.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__device_type is internal to libxl, rename it to the internal
only prefix. And eliminate redundant 'struct' keyword, in accord with
the coding style.
No functional changes.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Report whether shadow paging is supported by the hypervisor, since it
can be disabled at build time.
Reuse and tweak LIBXL_HAVE_PHYSINFO_CAP_HAP as it hasn't appeared in a
released version of Xen yet.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Current libxl code will always enable Hardware Assisted Paging (HAP),
expecting that the hypervisor will fallback to shadow if HAP is not
available. With the changes to DOMCTL_createdomain that's not the case
any longer, and the hypervisor will raise an error if HAP is not
available instead of silently falling back to shadow.
In order to keep the previous functionality report whether HAP is
available or not in XEN_SYSCTL_physinfo, so that the toolstack can
select a sane default if there's no explicit user selection of whether
HAP should be used.
Note that on ARM hardware HAP capability is always reported since it's
a required feature in order to run Xen.
Fixes: d0c0ba7d3d ('x86/hvm/domain: remove the 'hap_enabled' flag')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Each HVM guest currently gets a vkbd frontend/backend pair (c/s ebbd2561b4).
This consumes host resources unnecessarily for guests that have no use for
vkbd. Make this behaviour tunable to allow an administrator to choose. The
commit retains the current behaviour -- HVM guests still get vkdb unless
specified otherwise.
Signed-off-by: Eslam Elnikety <elnikety@amazon.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If a domU has a qemu-xen instance attached, it is required to call qemus
"xen-save-devices-state" method. Without it, the receiving side of a PV or
PVH migration may be unable to lock the image:
xen be: qdisk-51712: xen be: qdisk-51712: error: Failed to get "write" lock
error: Failed to get "write" lock
xen be: qdisk-51712: xen be: qdisk-51712: initialise() failed
initialise() failed
To fix this bug, libxl__domain_suspend_device_model() and
libxl__domain_resume_device_model() have to be called not only for HVM,
but also if the active device_model is QEMU_XEN.
Unfortunately, libxl__domain_build_info_setdefault() used to hardcode
b_info->device_model_version to QEMU_XEN if it does not know it any
better. As a result libxl__device_model_version_running() will return
incorrect values. This breaks domUs without a device_model.
libxl__qmp_stop() would wait 10 seconds in qmp_open() for a qemu that
will never appear. During this long timeframe the domU remains in state
paused on the sending side. As a result network connections may be
dropped. Once this bug is fixed as well, by just removing the assumption
that every domU has a QEMU_XEN, there is no code to actually initialise
b_info->device_model_version.
There is a helper function libxl__need_xenpv_qemu(), which is used in
various places to decide if a device_model has to be spawned. This
function can not be used as is, just to fill device_model_version,
because store_libxl_entry() was already called earlier.
Introduce LIBXL_DEVICE_MODEL_VERSION_NONE for PV and PVH that have no
need for a device_model to make the state explicit. Indicate this new
state via LIBXL_HAVE macro in libxl.h.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
An upcoming change will set the value of device_model_version properly
also for the non-HVM case.
Move existing code to new function libxl__domain_set_device_model.
Move also initialization for device_model_stubdomain to that function.
Make sure libxl__domain_build_info_setdefault is called with
device_model_version set.
Update libxl__spawn_stub_dm() and initiate_domain_create() to call the
new function prior libxl__domain_build_info_setdefault() because
device_mode_version is expected to be initialzed.
libxl_domain_need_memory() needs no update because it does not have a
d_config available anyway, and the callers provide a populated b_info.
The upcoming change needs a full libxl_domain_config, and the existing
libxl__domain_build_info_setdefault has just a libxl_domain_build_info
to work with.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The function domcreate_bootloader_done may branch early to
domcreate_stream_done, in case some error occoured. Here srs->dcs will be
NULL, which leads to a crash.
It is unclear what the purpose of that backpointer is. Perhaps it can be
removed, and domcreate_stream_done could use CONTAINER_OF.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: fold in comment required by Ian ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
This create an extra step for the two call sites of the function.
libxl__domain_suspend_device_model() in this patch gets an extra error
variable (there is ret and rc), but ret goes away in the next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
libxl_domain_soft_reset() haven't been tested, as it doesn't appear to
possible to call the function from xl.
This patch moves the creation of the QMP unix socket from QEMU to libxl.
But libxl doesn't rely on this yet.
When starting QEMU with dm_restrict=1, pre-open the QMP socket before
exec QEMU. That socket will be useful to find out if QEMU is ready, and
pre-opening it means that libxl can connect to it without waiting for
QEMU to create it.
The pre-opening is conditional, based on the use of dm_restrict
because it is using a new command line option of QEMU, and dm_restrict
support in QEMU is newer.
-chardev socket,fd=X is available with QEMU 2.12, since commit:
> char: allow passing pre-opened socket file descriptor at startup
> 0935700f8544033ebbd41e1f13cd528f8a58d24d
dm_restrict is available in QEMU 3.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These two new functions libxl__domain_build_state_{init,dispose} should
be called every time a new libxl__domain_build_state comes to existance.
There seems to be two of them, one with the domain creation machinery,
and one in the stub_dm_spawn.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Callbacks should be in the order that there are going to be executed.
This patch fixes the initiate_domain_create callbacks, and also
reorders the callbacks prototypes. That way, it's easier to follow the
flow.
This patch:
- move libxl__colo_restore_setup_done after domcreate_bootloader_done.
- move domcreate_attach_devices after domcreate_devmodel_started.
No functional change.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 359970fd8b ("tools/libxl: Switch Arm guest type to PVH") missed
changing the type field in c_info. This issue didn't surface until
ef72c93df9 which made creating PV guest on Arm unusable.
Create libxl__arch_domain_create_info_setdefault and switch the type
there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit 3b4adba ("tools/libxl: include scheduler parameters in the
output of xl list -l") added scheduling parameters to the set of
information collected by libxl_retrieve_domain_configuration(), in
order to report that information in `xl list -l`.
Unfortunately, libxl_retrieve_domain_configuration() is also called by
the migration / save code, and the results passed to the restore /
receive code. This meant scheduler parameters were inadvertently
added to the migration stream, without proper consideration for how to
handle corner cases. The result was that if migrating from a host
running one scheduler to a host running a different scheduler, the
migration would fail with an error like the following:
libxl: error: libxl_sched.c:232:sched_credit_domain_set: Domain 1:Getting domain sched credit: Invalid argument
libxl: error: libxl_create.c:1275:domcreate_rebuild_done: Domain 1:cannot (re-)build domain: -3
Luckily there's a fairly straightforward way to set parameters in a
"best-effort" fashion. libxl provides a single struct containing the
parameters of all schedulers, as well as a parameter specifying which
scheduler. Parameters not used by a given scheduler are ignored.
Additionally, the struct contains a parameter to specify the
scheduler. If you specify a specific scheduler,
libxl_domain_sched_params_set() will fail if there's a different
scheduler. However, if you pass LIBXL_SCHEDULER_UNKNOWN, it will use
the value of the current scheduler for that domain.
In domcreate_stream_done(), before calling libxl__build_post(), set
the scheduler to LIBXL_SCHEDULER_UNKNOWN. This will propagate
scheduler parameters from the previous instantiation on a best-effort
basis.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently, the toolstack is considering Arm guest always PV. However,
they are very similar to PVH because HW virtualization extension are used
and QEMU is not started. So switch Arm guest type to PVH.
To keep compatibility with toolstack creating Arm guest with PV type
(e.g libvirt), libxl will now convert those guests to PVH.
Furthermore, the default type for Arm in xl will now be PVH to allow
smooth transition for user.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The PV fields kernel, ramdisk, cmdline are only there for compatibility
with old toolstack. Instead of manually copying them over to there new
field, use the deprecated_by attribute in the IDL.
Suggested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxl__arch_domain_build_info_setdefault
A follow-up will require to modify default of multiple fields of
build_info. So rename the function accordingly.
No functional change.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Anthony PERARD
Andrew Cooper
Eric Shelton
Marek Marczykowski-Górecki
Paul Durrant
Paweł Marczewski
Ian Jackson
Paul Durrant
Roger Pau Monne
Wei Liu
Eslam Elnikety
Olaf Hering
George Dunlap
Julien Grall