The final user was blktap2, removed in Xen 4.13.
Strip out the ./configure check for it, and stop explicitly installing it in
the FreeBSD testing.
Fixes: 2a556b63a2 ("Drop blktap2")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
set_cloexec() had a bit too much copy&pate from setnonblock(), and
insufficient testing on ancient versions of Linux...
As written (emulating ancient linux by undef'ing O_CLOEXEC), strace shows:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
fcntl(3, 0x8003 /* F_??? */, 0x7ffe4a771d90) = -1 EINVAL (Invalid argument)
close(3) = 0
which is obviously nonsense.
Switch F_GETFL -> F_GETFD, and fix the second invocation to use F_SETFD. With
this, strace is rather happer:
open("/dev/xen/xenbus", O_RDWR) = 3
fcntl(3, F_GETFD) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
Fixes: bf7c146470 ("tools/libxs: Fix CLOEXEC handling in get_dev()")
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
We previously upped the minimum python version to 2.7, but neglected to
reflect this in ./configure
Fixes: 2a353c048c ("tools: Don't use distutils in configure or Makefile")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
This was clearly written by a C programmer, rather than a python programmer.
Drop all the useless semi-colons.
The very final line of the script simply references f.close, rather than
calling the function. Switch to using a with: statement, as python does care
about unclosed files if you enable enough warnings.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Prior to the split, "the clients" used tools/xenstored/Makefile.common whose
clean rule includes *.o whereas after the split, the removal of *.o was lost
by virtule of not including Makefile.common any more.
This is the bug behind the following build error:
make[2]: Entering directory '/local/xen.git/tools/xs-clients'
gcc xenstore_client.o (snip)
/usr/bin/ld: xenstore_client.o: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:35: xenstore] Error 1
which was caused by `make clean` not properly cleaning the tree as I was
swapping between various build containers.
Switch to a plain single-colon clean rule.
Fixes: 5c293058b1 ("tools/xenstore: move xenstored sources into dedicated directory")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
xs_fileno() opens a pipe on first use to communicate between the watch thread
and the main thread. Nothing ever sets CLOEXEC on the file descriptors.
Check for the availability of the pipe2() function with configure. Despite
starting life as Linux-only, FreeBSD and NetBSD have gained it.
When pipe2() isn't available, try our best with pipe() and set_cloexec().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
get_socket() opens a socket, then uses fcntl() to set CLOEXEC. This is racy
with exec().
Open the socket with SOCK_CLOEXEC. Use the same compatibility strategy as
O_CLOEXEC on ancient versions of Linux.
Reported-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Move the O_CLOEXEC compatibility outside of an #ifdef USE_PTHREAD block.
Introduce set_cloexec() to wrap fcntl() setting FD_CLOEXEC. It will be reused
for other CLOEXEC fixes too.
Use set_cloexec() when O_CLOEXEC isn't available as a best-effort fallback.
Fixes: f4f2f3402b ("tools/libxs: Open /dev/xen/xenbus fds as O_CLOEXEC")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
xc_dom_alloc_segment() is passed a size in bytes, calculates a size in pages
from it, then fills in the new segment information with a bytes value
re-calculated from the number of pages.
This causes the module information given to the guest (MB, or PVH) to have
incorrect sizes; specifically, sizes rounded up to the next page.
This in turn is problematic for Xen. When Xen finds a gzipped module, it
peeks at the end metadata to judge the decompressed size, which is a -4
backreference from the reported end of the module.
Fill in seg->vend using the correct number of bytes.
Fixes: ea7c8a3d0e ("libxc: reorganize domain builder guest memory allocator")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
xenalyze sets argp_program_bug_address to my old Citrix address. This
was done before xenalyze was in the xen.git tree; and it's the only
program in the tree which does so.
Now that xenalyze is part of the normal Xen distribution, it should be
obvious where to report bugs.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
After the following commit:
3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
xl list -l aborts with a double free error if a domain has at least
one vif defined:
$ sudo xl list -l
free(): double free detected in tcache 2
Aborted
Orginally, the vlan field was called vid and was defined as an integer.
It was appropriate to call libxl__xs_read_checked() with gc passed as
the string data was copied to a different variable. However, the final
version uses a string data type and the call should have been changed
to use NOGC instead of gc to allow that data to live past the gc
controlled lifetime, in line with the other string fields.
This patch makes the change to pass NOGC instead of gc and moves the
new code to be next to the other string fields (fixing a couple of
errant tabs along the way), as recommended by Jason.
Fixes: 3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
backendtype=phy using the blktap kernel module needs to use write_dev,
but tapback can't support that. tapback should perform better, but make
the script compatible with the old kernel module again.
Fixes: 76a484193d ("hotplug: Update block-tap")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Michal reported that the gitlab CI is failing because of this series
[1].
This reverts commit 6f9d90ea94.
Signed-off-by: Julien Grall <jgrall@amazon.com>
There are use cases (for example using the PV driver) in Dom0less
setup that require Dom0less DomUs start immediately with Dom0, but
initialize XenStore later after Dom0's successful boot and call to
the init-dom0less application.
An error message can seen from the init-dom0less application on
1:1 direct-mapped domains:
```
Allocating magic pages
memory.c:238:d0v0 mfn 0x39000 doesn't belong to d1
Error on alloc magic pages
```
The "magic page" is a terminology used in the toolstack as reserved
pages for the VM to have access to virtual platform capabilities.
Currently the magic pages for Dom0less DomUs are populated by the
init-dom0less app through populate_physmap(), and populate_physmap()
automatically assumes gfn == mfn for 1:1 direct mapped domains. This
cannot be true for the magic pages that are allocated later from the
init-dom0less application executed in Dom0. For domain using statically
allocated memory but not 1:1 direct-mapped, similar error "failed to
retrieve a reserved page" can be seen as the reserved memory list is
empty at that time.
Since for init-dom0less, the magic page region is only for XenStore.
To solve above issue, this commit allocates the XenStore page for
Dom0less DomUs at the domain construction time. The PFN will be
noted and communicated to the init-dom0less application executed
from Dom0. To keep the XenStore late init protocol, set the connection
status to XENSTORE_RECONNECT.
Currently the GUEST_MAGIC_BASE in the init-dom0less application is
hardcoded, which will lead to failures for 1:1 direct-mapped Dom0less
DomUs.
Since the guest magic region allocation from init-dom0less is for
XenStore, and the XenStore page is now allocated from the hypervisor,
instead of hardcoding the guest magic pages region, use
xc_hvm_param_get() to get the XenStore page PFN. Rename alloc_xs_page()
to get_xs_page() to reflect the changes.
With this change, some existing code is not needed anymore, including:
(1) The definition of the XenStore page offset.
(2) Call to xc_domain_setmaxmem() and xc_clear_domain_page() as we
don't need to set the max mem and clear the page anymore.
(3) Foreign mapping of the XenStore page, setting of XenStore interface
status and HVM_PARAM_STORE_PFN from init-dom0less, as they are set
by the hypervisor.
Take the opportunity to do some coding style improvements when possible.
Reported-by: Alec Kwapis <alec.kwapis@medtronic.com>
Suggested-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
When reinstating some of systemd.m4 between v1 and v2, I reintroduced a little
too much. While {c,o}xenstored are indeed no longer linked against
libsystemd, ./configure still looks for it.
Drop this too.
Fixes: ae26101f6b ("tools: Drop libsystemd as a dependency")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Enabling it using an HVM param is fragile, and complicates the logic when
deciding whether options that interact with altp2m can also be enabled.
Leave the HVM param value for consumption by the guest, but prevent it from
being set. Enabling is now done using and additional altp2m specific field in
xen_domctl_createdomain.
Note that albeit only currently implemented in x86, altp2m could be implemented
in other architectures, hence why the field is added to xen_domctl_createdomain
instead of xen_arch_domainconfig.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> # hypervisor
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # tools/libs/
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
With the XEN_DOMCTL_dt_overlay DOMCTL added, users should be able to
attach (in the future also detach) devices from the provided DT overlay
to domains. Support this by introducing a new "xl dt-overlay" command
and related documentation, i.e. "xl dt-overlay attach. Slightly rework
the command option parsing logic.
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Currently, the number of SPIs allocated to the domain is only
configurable for Dom0less DomUs. Xen domains are supposed to be
platform agnostics and therefore the numbers of SPIs for libxl
guests should not be based on the hardware.
Introduce a new xl config entry for Arm to provide a method for
user to decide the number of SPIs. This would help to avoid
bumping the `config->arch.nr_spis` in libxl everytime there is a
new platform with increased SPI numbers.
Update the doc and the golang bindings accordingly.
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Fix the name mismatch in the xl dt-overlay command, the
command name should be "dt-overlay" instead of "dt_overlay".
Add the missing "," in the cmdtable.
Fix the exit code of the dt-overlay command, use EXIT_FAILURE
instead of ERROR_FAIL.
Fixes: 61765a07e3 ("tools/xl: Add new xl command overlay for device tree overlay support")
Suggested-by: Anthony PERARD <anthony@xenproject.org>
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
To unify certain common sanity checks, checks are done very early in
processing based only on the top-level type.
Unfortunately, when TRC_HVM_EMUL was introduced, it broke some of the
assumptions about how the top-level types worked. Namely, traces of
this type will show up outside of HVM contexts: in idle domains and in
PV domains.
Make an explicit exception for TRC_HVM_EMUL types in a number of places:
- Pass the record info pointer to toplevel_assert_check, so that it
can exclude TRC_HVM_EMUL records from idle and vcpu data_mode
checks
- Don't attempt to set the vcpu data_type in hvm_process for
TRC_HVM_EMUL records.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A long-standing usability sub-optimality with xenalyze is the
necessity to specify `--svm-mode` when analyzing AMD processors. This
fundamentally comes about because the same trace event ID is used for
both VMX and SVM, but the contents of the trace must be interpreted
differently.
Instead, allocate separate trace events for VMX and SVM vmexits in
Xen; this will allow all readers to properly interpret the meaning of
the vmexit reason.
In xenalyze, first remove the redundant call to init_hvm_data();
there's no way to get to hvm_vmexit_process() without it being already
initialized by the set_vcpu_type call in hvm_process().
Replace this with set_hvm_exit_reson_data(), and move setting of
hvm->exit_reason_* into that function.
Modify hvm_process and hvm_vmexit_process to handle all four potential
values appropriately.
If SVM entries are encountered, set opt.svm_mode so that other
SVM-specific functionality is triggered.
Remove the `--svm-mode` command-line option, since it's now redundant.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
xentrace_format was always of limited utility, since trace records
across pcpus were processed out of order; it was superseded by xenalyze
over a decade ago.
But for several releases, the `formats` file it has depended on for
proper operation has not even been included in `make install` (which
generally means it doesn't get picked up by distros either); yet
nobody has seemed to complain.
Simple remove xentrace_format, and point people to xenalyze instead.
NB that there is no man page for xenalyze, so the "see also" on the
xentrace man page is simply removed for now.
Signed-off-by: George Dunlap <george.dunlap@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
There are no more users, and we want to disuade people from introducing new
users just for sd_notify() and friends. Drop the dependency.
We still want the overall --with{,out}-systemd to gate the generation of the
service/unit/mount/etc files.
Rerun autogen.sh, and mark the dependency as removed in the build containers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
... in order to avoid linking against the whole of libsystemd.
Only minimal changes to the upstream copy, to function as a drop-in
replacement for sd_notify() and as a header-only library.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Have gen-cpuid.py write out INIT_FEATURE_VAL_TO_NAME, derived from the same
data source as INIT_FEATURE_NAME_TO_VAL, although both aliases of common_1d
are needed.
In xen-cpuid.c, sanity check at build time that leaf_info[] and
feature_names[] are of sensible length.
As dump_leaf() rendered missing names as numbers, always dump leaves even if
we don't have the leaf name. This conversion was argumably missed in commit
59afdb8a81 ("tools/misc: Tweak reserved bit handling for xen-cpuid").
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Rename INIT_FEATURE_NAMES to INIT_FEATURE_NAME_TO_VAL as we're about to gain a
inverse mapping of the same thing.
Use dict.items() unconditionally. iteritems() is a marginal perf optimsiation
for Python2 only, and simply not worth the effort on a script this small.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
It is noticed that commit:
3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
introduces a new "vlan" string field to libxl_device_nic. But the
golang bindings are missing. Add it in this patch.
Fixes: 3bc14e4fa4 ("tools/libs/light: Add vlan field to libxl_device_nic")
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Acked-by: George Dunlap <george.dunlap@cloud.com>
Update parse_nic_config() to support a new `vlan' keyword. This
keyword specifies the VLAN configuration to assign to the VIF when
attaching it to the bridge port, on operating systems that support
the capability (e.g. Linux). The vlan keyword will allow one or
more VLANs to be configured on the VIF when adding it to the bridge
port. This will be done by the vif-bridge script and functions.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Add `vlan' string field to libxl_device_nic, to allow a VLAN
configuration to be specified for the VIF when adding it to the
bridge device.
Update libxl_nic.c to read and write the vlan field from the
xenstore.
This provides the capability for supported operating systems (e.g.
Linux) to perform VLAN filtering on bridge ports. The Xen
hotplug scripts need to be updated to read this information from
the xenstore and perform the required configuration.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
In compare_cpu_pct(), there is a double -> unsigned long long converion when
calling compare(). In C, this discards the fractional part, resulting in an
out-of order sorting such as:
NAME STATE CPU(sec) CPU(%)
xendd --b--- 4020 5.7
icecream --b--- 2600 3.8
Domain-0 -----r 1060 1.5
neon --b--- 827 1.1
cheese --b--- 225 0.7
pizza --b--- 359 0.5
cassini --b--- 490 0.4
fusilli --b--- 159 0.2
bob --b--- 502 0.2
blender --b--- 121 0.2
bread --b--- 69 0.1
chickpea --b--- 67 0.1
lentil --b--- 67 0.1
Introduce compare_dbl() function and update compare_cpu_pct() to call it.
Fixes: 49839b535b ("Add xenstat framework.")
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Now that we're using hypercalls to start APs, we can replace the 'ap_cpuid'
global with a regular function parameter. This requires telling the compiler
that we'd like the parameter in a register rather than on the stack.
While adjusting, rename to cpu_setup(). It's always been used on the BSP,
making the name ap_start() specifically misleading.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
If xenstored runs out of memory it is possible for it to fail operations
that should succeed. libxl wasn't robust against this, and could fail
to ensure that the TTY path of a non-initial console was created and
read-only for guests. This doesn't qualify for an XSA because guests
should not be able to run xenstored out of memory, but it still needs to
be fixed.
Add the missing error checks to ensure that all errors are properly
handled and that at no point can a guest make the TTY path of its
frontend directory writable.
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
libxl passes some information to libacpi to create the ACPI table for a PVH
guest, and among that information it's a bitmap of which vCPUs are online
which can be less than the maximum number of vCPUs assigned to the domain.
While the population of the bitmap is done correctly for HVM based on the
number of online vCPUs, for PVH the population of the bitmap is done based on
the number of maximum vCPUs allowed. This leads to all local APIC entries in
the MADT being set as enabled, which contradicts the data in xenstore if vCPUs
is different than maximum vCPUs.
Fix by copying the internal libxl bitmap that's populated based on the vCPUs
parameter.
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Link: https://gitlab.com/libvirt/libvirt/-/issues/399
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Fixes: 14c0d328da ('libxl/acpi: Build ACPI tables for HVMlite guests')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
MISRA C Rule 20.7 states: "Expressions resulting from the expansion
of macro parameters shall be enclosed in parentheses". Therefore, some
macro definitions should gain additional parentheses to ensure that all
current and future users will be safe with respect to expansions that
can possibly alter the semantics of the passed-in macro parameter.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... in order to change how LAPIC_ID handling works. Importantly, this allows
us to start APs by vCPU ID in order to query the LAPIC_ID, rather than needing
to know the APIC_ID in order to wake them.
Other improvements avoid:
* The 16bit entry stub
* A LMSW insn, which has no decode assist on AMD and needs emulating fully
* 13 vLAPIC emulations when 3 hypercalls can do
* 4 pages of stack when 1 in plenty
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The IO port, MSR, IO-APIC and LAPIC accessors compile typically to single or
pairs of instructions, which is less overhead than even the stack manipulation
to call the helpers.
Move the implementations from util.c to being static inlines in util.h
In addition, turn ioapic_base_address into a constant as it is never modified
from 0xfec00000 (substantially shrinks the IO-APIC logic), and make use of the
"A" constraint for WRMSR/RDMSR like we already do for RDTSC.
Bloat-o-meter reports a net:
add/remove: 0/13 grow/shrink: 0/18 up/down: 0/-790 (-790)
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Right now, Xen returns -ENOENT for both "the provided blob isn't correct for
this CPU", and "the blob isn't newer than what's loaded".
This in turn causes xen-ucode to exit with an error, when "nothing to do" is
more commonly a success condition.
Handle EEXIST specially and exit cleanly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
In case a test is failing in test-xenstore, let the tool exit with an
exit status other than 0.
Fix a typo in an error message.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: 3afc5e4a5b ("tools/tests: add xenstore testing framework")
Signed-off-by: Juergen Gross <jgross@suse.com>
Today test-xenstore will write nodes with 3000 bytes node data. This
size is exceeding the default quota for the allowed node size. While
working in dom0 with C-xenstored, OCAML-xenstored does not like that.
Use a size of 2000 instead, which is lower than the allowed default
node size of 2048.
Fixes: 3afc5e4a5b ("tools/tests: add xenstore testing framework")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
An XSM hook for get_dom0_console is currently missing. Using XSM with
a PVH dom0 shows:
(XEN) FLASK: Denying unknown platform_op: 64.
Wire up the hook, and allow it for dom0.
Fixes: 4dd160583c ("x86/platform: introduce hypercall to get initial video console settings")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Fixes warnings such as:
File "config.ml", line 102, characters 12-27:
102 | | Failure "int_of_string" -> append (k, "expect int arg")
^^^^^^^^^^^^^^^
Warning 52: Code should not depend on the actual values of
this constructor's arguments. They are only for information
and may change in future versions. (See manual section 9.5)
Do not rely on the string values of the `Failure` exception, but use the
`_opt` functions instead.
Signed-off-by: Edwin Török <edwin.torok@cloud.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a xen-livepatch tool --force option, that's propagated into the
hyerpvisor for livepatch operations. The intention is for the option to be
used to bypass some checks that would otherwise prevent the patch from being
loaded.
Re purpose the pad field in xen_sysctl_livepatch_op to be a flags field that
applies to all livepatch operations. The flag is currently only set by the
hypercall wrappers for the XEN_SYSCTL_LIVEPATCH_UPLOAD operation, as that's so
far the only one where it will be used initially. Other uses can be added as
required.
Note that helpers would set the .pad field to 0, that's been removed since the
structure is already zero initialized at definition.
No functional usages of the new flag introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Andrew Cooper