An application which uses libxl_osevent_register_hooks, and doesn't
use libxl_sigchld_owner_mainloop, would never properly experience the
deaths of its (libxl) children.
This is because the SIGCHLD self pipe would be handled using ad-hoc
code in beforepoll_internal and afterpoll_internal. However, this is
no good if application is using the fd registration system instead; in
that case these functions would not be called and nothing would deal
with readability of the self pipe.
Fix this as follows:
The SIGCHLD self pipe now is now dealt with by a standard libxl__ev_fd
handler, which is registered and deregistered along with the SIGCHLD
handler itself. The handler function subsumes the ad-hoc response
code removed from beforepoll_internal, and the functionality of
libxl__fork_selfpipe_woken.
This is also tidier as the SIGCHLD self pipe is no longer touched
outside libxl_fork.c other than in ctx initialisation and teardown.
(The ad-hoc arrangements for poller->wakeup_pipe in
beforepoll_internal and afterpoll_internal are OK because the
libxl__poller mechanism exists to wake up threads which are sitting
inside libxl's poll loop, so is not applicable to the application's
event loop.)
Reported-by: Bamvor Jian Zhang <bjzhang@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Bamvor Jian Zhang <bjzhang@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Previously, libxl_sigchld_owner_libxl_always was mishandled. It would
result in libxl paying no attention to the sigchld self pipe.
Fix this by fixing chldmode_ours so that it returns true iff we are
supposed to be handling SIGCHLD.
Additionally, we arrange to use chldmode_ours everywhere where we are
installing/removing signal handlers and/or deciding whether to check
the self pipe, etc. This means it needs a new "creating" flag
argument for the benefit of libxl__ev_child_fork, which needs to
install the signal handler in libxl_sigchld_owner_libxl even if there
are not currently any children.
ctx->childproc_hooks->chldowner is now interpreted only by
chldmode_ours.
Reported-by: Bamvor Jian Zhang <bjzhang@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Bamvor Jian Zhang <bjzhang@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
---
v2: Get sense of chldmode test right in perhaps_removehandler (!)
We are going to want the gc for libxl__ev_fd_register.
No functional change in this patch. Simply change the argument types,
and the actual arguments from ctx to gc. Inside these functions, use
CTX (the macro which uses gc) rather than the old formal parameter
ctx.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Uses xc_dom_devicetree_mem which was just added. The call to this needs to be
carefully sequenced to be after xc_dom_parse_image (so we can tell which kind
of guest we are building, although we don't use this yet) and before
xc_dom_mem_init which tries to decide where to place the FDT in guest RAM.
Removes libxl_noarch which would only have been used by IA64 after this
change. Remove IA64 as part of this patch.
There is no attempt to expose this as a configuration setting for the user.
Includes a debug hook to dump the dtb to a file for inspection.
On v7 the CPU compat is currently hardcoded to cortex-a15. This likely wants
to change at some point.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
The new coding style uses the convenience macro CTX as declared in
libxl_internal.h. Substitute an invocation of this macro for its
body at the two places it occurs in libxl_utils.c.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To conform to the new coding style, replace the invocation of
LIBXL__LOG in the function libxl_pipe() in the file libxl_utils.c
with an invocation of LOG. Create a local libxl__gc gc* for LOG
to use by invoking GC_INIT(ctx) at the top of the function, and
clean it up by invoking GC_FREE at the exit. Create a variable,
ret, to consolidate exits in one place and avoid invoking GC_FREE
twice.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup - no functional changes
The convenience macros LOG and LOGE have been written to take the
place of the old macros in the LIBXL__LOG* family. Replace the
invocations of the old macros in the function libxl_read_file_contents()
with invocations of the corresponding new ones. Create a local
libxl__gc gc* for the new macros to use by invoking GC_INIT(ctx) at the
top of the function, and clean it up by invoking GC_FREE at the two
exit points.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup - no functional changes
The convenience macro LOGE has been written to take the place of
LIBXL__LOG_ERRNO. LOGE depends on the existence of a local libgl__gc
*gc. Replace two invocations of LIBXL__LOG_ERRNO, which are in
functions that already have a libxl__gc *gc present, to invocations
of the new macro.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Code cleanup - no functional changes
The convenience macro GCSPRINTF has been written to be used in place
of libxl__sprintf(). Replace all calls to libxl__sprintf() in
libxl_utils.c with invocations of the new macro.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
The convenience macro GCSPRINTF has been written to be used in place of
libxl_sprintf. Change all calls to libxl_sprintf() in libxl_qmp.c to
invocations of the new macro.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
Coding style has recently been changed for libxl. The convenience
macro LOGE() has been introduced, and invocations of the old macro
LIBXL__LOG_ERROR() are to be replaced with it. Change all occurences
of the old macro (in functions that have a local libxl_gc *gc) except
the one in register_serials_chardev_callback() to the new one. (This
function lacks a local libxl__gc *gc, which LOGE() requires.)
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coding style has recently been changed for libxl. The convenience
macro LOG() has been introduced, and invocations of the old macro
LIBXL__LOG() are to be replaced with it. Change occurences of the
old macro to the new one in the functions qmp_handle_response()
and qmp_handle_error_response(). The new macros need access to a
local libxl__gc *gc, so add it as a parameter to both these functions,
and pass the instance in qmp_next() down the call chain to
qmp_handle_response() and in turn to qmp_handle_error_response().
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[ijc -- reverted one unintential w/s change]
Add the necessary logic in libxl to allow it to act as a listener for
launching backends in a driver domain, replacing udev (like we already
do on Dom0). This new functionality is acomplished by watching the
domain backend path (/local/domain/<domid>/backend) and reacting to
device creation/destruction.
The way to launch this listener daemon is from xl, using the newly
introduced "devd" command. The command will daemonize by default,
using "xldevd.log" as it's logfile. Optionally the user can force the
execution of the listener in the foreground by passing the "-F"
option to the devd command.
Current backends handled by this daemon include Qdisk, vbd and vif
device types.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When running libxl from a driver domain there's no xenstore pid file
(because xenstore is not running on the driver domain). Also, at that
point in libxl initialization there's no way to know wether libxl is
running on a domain different than Dom0, so just revert the change in
order to allow libxl to work on driver domains.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move the daemonizer code from create_domain into it's own function
that can be called from other places different than create_domain.
This will be used to daemonize the driver domain backend handler.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current Qemu launch functions in libxl require the usage of data
structures only avaialbe on domain creation. All this information is
not need in order to launch a Qemu instance to serve Qdisk backends,
so introduce a new simplified helper that can be used to launch
Qemu/Qdisk, that will be used to launch Qdisk in driver domains.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In libxl__need_xenpv_qemu check that the backend domain of the Qdisk
device is Dom0 before launching a Qemu instance in the toolstack
domain.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When Qemu is launched from a driver domain to act as a PV disk
backend we can make sure that Qemu is running before detaching
devices, so there's no need for the bodge there.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Synchronize the clean up of the backend from the toolstack domain when
the driver domain has actually finished closing the backend for the
device.
This is accomplished by waiting for the driver domain to remove the
directory containing the backend keys, then the toolstack domain will
finish the cleanup by removing the empty folders on the backend path.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If libxl is executed inside a guest domain it needs write access to
the local libxl xenstore dir (/local/<domid>/libxl) to store internal
data. This also applies to Qemu which needs a
/local/<domid>/device-model xenstore directory.
This patch creates the mentioned directories for each guest launched
from libxl.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the named path is a leaf node, libxl__xs_directory can succeed,
returning non-null, but set *nb to 0.
In three places in libxl this may result in a zero size argument being
passed to malloc() or realloc(), which is not adviseable.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__wait_for_device_model blocks, with the ctx lock held, waiting
for a response from the device model. If the dm doesn't respond
quickly (for example, because it has crashed), this may block the
whole process. Explain this in a comment, rename the function to
libxl__wait_for_device_model_deprecated, and explain what to use
instead.
libxl__wait_for_offspring is the core implementation for the above.
Its name leads people to think it might be generally useful for
waiting for children, which is far from the case. It only waits for
xenstore. Also it has the problems described above. Explain this,
rename it to libxl__xenstore_child_wait_deprecated, and explain what
to use instead.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__datacopier_prefixdata would prepend a deliberately short block
(not just a half-full one, but one with a short buffer) to the
dc->bufs queue. However, this is wrong because datacopier_readable
will find it and try to continue to fill it up.
Instead, allocate a full-sized buffer.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Tested-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Without this, code interrupted by SIGCHLD may experience strange
values of errno. (As far as I know this is not the cause of any
reported bugs.)
This fix should be backported in due course.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This allows setting the namespace for values of an Enumeration to be different
from the namespace of the Enumeration itself.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A KeyedUnion consists of two fields in the containing struct. First an
enum field ("e") used as a descriminator and second a union ("u")
containing potentially anonymous structs associated with each enum
value.
We map the anonymous structs to structs named after the descriminator
field ("e") and the specific enum values. We then declare an ocaml
variant type name e__union mapping each enum value to its associated
struct.
So given IDL:
foo = Enumeration("foo", [
(0, "BAR"),
(1, "BAZ"),
])
s = Struct("s", [
("u", KeyedUnion(none, foo, "blargle", [
("bar", Struct(...xxx...)),
("baz", Struct(...yyy...)),
])),
])
We generate C:
enum foo { BAR, BAZ };
struct s {
enum foo blargle;
union {
struct { ...xxx... } bar;
struct { ...yyy... } baz;
} u;
}
and map this to ocaml
type foo = BAR | BAZ;
module S = struct
type blargle_bar = ...xxx...;
type blargle_baz = ...yyy...;
type blargle__union = Bar of blargle_bar | Baz of blargle_baz;
type t =
{
blargle : blargle__union;
}
end
These type names are OK because they are already within the namespace
associated with the struct "s".
If the struct associated with bar is empty then we don't bother with
blargle_bar of "of blargle_bar".
No actually change in the generated code since we don't generate any
KeyedUnions yet.
The actual implementation was inspired by
http://www.linux-nantes.org/~fmonnier/ocaml/ocaml-wrapping-c.php#ref_constvrnt
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: David Scott <dave.scott@eu.citrix.com>
The new coding style uses the convenience macro GCNEW as declared in
libxl_internal.h. Substitute an invocation of this macro for its
body at the one place it occurs in libxl_qmp.c.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The new coding style uses the convenience macro CTX as declared in
libxl_internal.h. Substitute an invocation of this macro for its body
at the one place it occurs in libxl_qmp.c.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update qmp_send() in libxl_qmp.c to use the new convenience macros
declared in libxl_internal.h. Uses GC_INIT at the top of the function,
and GC_FREE at the exit. Since GC_INIT returns a libxl__gc by reference
and not by value, remove the address operator from the left of the
variable gc where it is passed as a parameter.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Code cleanup -- no functional changes
Coding style has recently been changed for libxl. The convenience macro
LOG() has been introduced, and it is intended that it calls to the old
macro LIBXL__LOG() be replaced with it. Change 7 occurences of the old
macro (in functions that have a local libxl_gc *gc) to the new one.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace libxl__sprintf, LIBXL__LOG and LIBXL__LOG_ERRNO with new
"Convenience macros": GCSPRINTF, LOG, LOGE in tools/libxl/libxl_device.c
Signed-off-by: Alexandra Sava <alexandrasava18@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl currently refuses to execute hotplug scripts if the backend
domid of a device is different than LIBXL_TOOLSTACK_DOMID. This will
prevent libxl from executing hotplug scripts when running on a domain
different than LIBXL_TOOLSTACK_DOMID, we should instead check if
backend_domid is different than current domid.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch writes Dom0 domid on xenstore (like it's done for other
guests), and adds a libxl helper function to fetch that domid from
xenstore.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
[ ijc -- dropped xencommons hunk, same change was made independently
in 02ebea7768 ]
Change the qemu parameters for upstream qemu vgas to the
new ones (-device), introduced some years ago.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
VMs using Cirrus graphics have always had 4 MB of video RAM on XenServer, while
libxl currently does not allow values less than 8 MB.
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ian Jackson
Roger Pau Monne
Ian Campbell
Kelley Nielsen
George Dunlap
Matthew Daley
Rob Hoes
Alexandra Sava
Fabio Fantoni