Everything works fine with Debian 13. Provide two new build jobs, and update
both the randconfig the test jobs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
We have a mix of root and non-root containers, and are trying to become
rootless. This can cause the local CPIO fragements to end up being user:user
in the test environment.
Nothing seems to go wrong so far, but it's a trap waiting to happen.
Make everything consistently root for the initrds, irrespective of the
rootness of the container the test is running in.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The errors can happen in the middle of a console line which causes the message
to appear at the end of the current line.
Prepend a newline to clearly separate the error line.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
In the console expect script, "send_error" will send a message to standard
error. Current use of this script redirects only standard output into a
pipeline. This causes the error messages to sometimes appear hidden in the
middle of the test logs.
Redirect also standard error to clearly show when a test has timed out or hit
EOF.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce new CI job to run x86 XTF argo test under QEMU to smoke test argo
feature functionality in upstream CI.
The new job lead time is ~30s, limit max job duration to 60s.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The default terminal settings in Linux will enable echo which interferes with
these tests. Set the value in the script to avoid failure caused by a settings
reset.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Without "pipefail", $? have the exit value of `tee`, which should
always be 0. But instead of using "pipefail", do collect the value of
from the test with $PIPESTATUS.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This is easier than escaping individual characters, especially '&'
and '<' which are problematic if present.
We might still need to escape ']]>' if this string is present in the
test output, but hopefully not.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Package domU for dom0 and insert into the uncompressed part of dom0's rootfs,
rather than recompressing it as part of the overlay.
For Qubes, this avoids putting the domU kernel in dom0's rootfs for tests
which aren't going to boot a guest.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
For Qubes, this requires switching from sh to bash.
This reduces the number of times the target filename needs to be written to 1.
Expand the comment to explain the concatenation constraints.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Svpbmt extension is necessary for chaning the memory type for a page contains
a combination of attributes that indicate the cacheability, idempotency,
and ordering properties for access to that page.
As a part of the patch the following is introduced:
- Svpbmt memory type defintions: PTE_PBMT_{NOCACHE,IO}.
- PAGE_HYPERVISOR_{NOCACHE,WC}.
- RISCV_ISA_EXT_svpbmt and add a check in runtime that Svpbmt is
supported by platform.
- Update riscv/booting.txt with information about Svpbmt.
- Update logic of pt_update_entry() to take into account PBMT bits.
Use 'unsigned long' for pte_attr_t as PBMT bits are 61 and 62 and it doesn't
fit into 'unsigned int'. Also, update function prototypes which uses
'unsigned int' for flags/attibutes.
Enable Svpbmt for testing in QEMU as it is now mandatory for Xen work.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
... and use them from their installed location.
The full reclusive copy of tools/tests brings in all build and intermediate
artefacts. e.g. for test-tsx alone:
./tests/tsx
./tests/tsx/.test-tsx.o.d
./tests/tsx/test-tsx.o
./tests/tsx/.gitignore
./tests/tsx/test-tsx
./tests/tsx/Makefile
./tests/tsx/test-tsx.c
duplicating the test binary which is also in ./usr/lib/xen/tests
Rewrite run-tools-tests to run tests from their installed
location (/usr/lib/xen/tests in alpine), which effectively removes the outer
loop over $dir.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
This really is a legacy of not having parameters to start with. Give PV dom0
with a PVH domU a real name.
Reformat the table to fix alignment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
We should avoid changing files from the source tree if we don't intend
to commit the result.
We don't really need to check if $EXTRA_FIXED_RANDCONFIG is empty so
add it to the temporary file in all cases.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Hook arm64 QEMU configuration to qemu-xtf.sh and use new script in arm64 CI
jobs.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Use qemu-xtf.sh for qemu-smoke-x86-64-gcc-efi job.
Lead time is reduced a bit since not all XTF code base is built, just the
required test.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add test runner script qemu-xtf.sh which is allows any XTF x86 test to be
easily executed. Test runner is invoked from the qemu-smoke* jobs with the
hardcoded parameters.
Each x86 XTF job lead time is reduced a bit since only the test-related code
is built, not the entire XTF project.
Add .gitignore to avoid committing test artifacts by mistake.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This also moves executables too.
I'm not sure why xilinx-smoke-dom0-x86_64.sh was overriding PATH too, as
/usr/local is clearly in PATH given the other tests, but drop that too.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
All the x86 hardware runners are out of date, to varying degrees, in terms of
microcode.
Microcode must be uncompressed and prepended to the initrd in order for Xen to
be able to use it during early boot.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
The argo artefact is now a cpio archive and can be appended to dom?-rootfs
directly, rather than being part of of the overlay. Drop the
copy_dom?_files() functions.
xen-argo.ko has moved into the standard location, so update the insmod path.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Use the new test-artifacts which provide rootfs.cpio.gz rather than
initrd.tar.gz. rootfs.cpio.gz also has all the necessary top-level
directories, and includes the rc_verbose setting, so these modifications can
be dropped.
Having that, do not repack the whole initrd, but only pack modified
files and rely on Linux handling of concatenated archives.
This allows packing just test-related files (which includes the whole
toolstack), instead of the whole initrd.
For xilinx-smoke-dom0-x86_64.sh, this involves instructing grub not to unzip
the archive, as doing so corrupts it.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Right now, we have initrd.cpio.gz as domU, and initrd.tar.gz as the base for
dom0.
Rename initrd.cpio.gz to domU-rootfs.cpio.gz, and xen-rootfs.cpio.gz to
dom0-rootfs.cpio.gz to make it clearer which is which. Rename the VM from
test to domU.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
The previous attempt has correct diagnosis, but added -notransfer flag
in a wrong place - it should be used in the first (outer) match out of
two, not the second (inner) one.
Fixes: 1e12cbd6af ("CI: fix waiting for final test message")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Upcoming changes won't unpack original rootfs anymore, so sed on
existing file cannot be used. Override the whole file instead.
No functional change intended.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
It appears as sometimes it takes more time for Xen even start booting,
mostly due to firmware and fetching large boot files by grub. In some
jobs the current timeout is pretty close to the actual time needed, and
sometimes (rarely for now) test fails due to timeout expiring in the
middle of dom0 booting. This will be happening more often if the
initramfs will grow (and with more complex tests).
This has been observed on some dom0pvh-hvm jobs, at least on runners hw3
and hw11.
Switch to using expect (console.exp) for more robust test output
handling. This allows waiting separately for Xen starting to boot and
then for the test to complete. For now, set both of those to 120s, which
pessimistically bumps timeout for the whole test to 240s (from 120s).
Add S3 handling to console.exp via SUSPEND_MSG + WAKEUP_CMD.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Expect normally discards initial part of its buffer after matching the
patter, before looking for the next one. If both PASSED and LOG_MSG
happen to be in the buffer at the same time, depending on their order,
only one will be matched and the waiting for the other will timeout.
Example expect -d output of this happening (parts eclipsed for brevity):
expect: does "\r\r\r\nWelcome to Alpine Linux 3.18\r\r\r\n...\r\r\r\r\n(domU) + echo 'pci test passed'\r\r\r\r\n(domU) pci test passed\r\r\r\r..." (spawn_id exp4) match regular expression "pci test passed"? Gate "pci test passed"? gate=yes re=yes
...
Gate keeper glob pattern for '\nWelcome to Alpine Linux' is '
Welcome to Alpine Linux'. Activating booster.
expect: does "'\r\r\r\r\n(domU) pci test passed\r\r\r\r\n(domU) [ ok ]\r\r\r\r\n(domU) [ ok ]\r\r\r\r\n(domU) \r\r\r\r\r\n(domU) domU Welcome to Alpine Linux 3.18\r\r\r\r\n(domU) \rKernel 6.6.56 on an x86_64 (/dev/hvc0)\r\r\r\r\n(domU) \r\r\r\r\r\n" (spawn_id exp4) match regular expression "\nWelcome to Alpine Linux"? Gate "\nWelcome to Alpine Linux"? gate=no
Fix this by using -notransfer flag to keep matched part in the buffer.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citix.com>
Add additional stage in console output parsing - wait for first message
from Xen. The message is defined via BOOT_MSG variable. This has two
effects:
- distinguishes failing Xen to load at all from later test failures
- resets timeout when Xen starts loading
The latter is especially relevant for hardware tests where firmware +
network boot may take some time before Xen starts booting. The two-stage
timeout is more robust solution than increasing the overall timeout.
The issue has been observed on some dom0pvh-hvm jobs, at least on
runners hw3 and hw11. This patch is a first stage before qubes-x86-64.sh
is switched to use expect in the next stage.
While at it, consistently use 'expect -re' for all matches. This
especially allows matching newlines ("\n"), which will become relevant
in the next patch. And document variables used in console.exp.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Change how PCI device lookup is done to handle also USB devices, in
which case get the USB controller. Instead of taking basename of the
'device' symlink, resolve the full path (example:
/sys/devices/pci0000:00/0000:00:09.0/usb4/4-7/4-7:1.0) and take the
first part after pci0000:00. Theoretically it could be a bridge, but VM
has flat PCI topology.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The network driver initializes asynchronously, and it may not be ready
yet by the time the startup script is called. This is especially the
case for USB network adapter (where the PCI device is the USB
controller) in the upcoming runner.
Don't bother about separate timeout - test timeout will cover this part
too.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
And start collecting qemu log earlier, so it isn't lost in case of a
timeout during domain startup.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
It fails on larger initramfs (~250MB one) and sometimes even smaller
depending on memory size/memory map, let Linux do it.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Hardware runners that use legacy boot use iPXE instead of grub2. Create
boot.ipxe for those too - with exact same options.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
By default, the `aia` option is set to "none" which selects the SiFive PLIC for
handling wired interrupts. However, since PLIC is now considered obsolete and
will not be supported by Xen now, APLIC and IMSIC are selected instead to manage
both wired interrupts and MSIs.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead use env to find the location of expect.
Additionally do not use the -f flag, as it's only meaningful when passing
arguments on the command line, which we never do for console.exp. From the
expect 5.45.4 man page:
> The -f flag prefaces a file from which to read commands from. The flag
> itself is optional as it is only useful when using the #! notation (see
> above), so that other arguments may be supplied on the command line.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
There are two reasons for that:
1. In the README, GCC baseline is chosen to be 12.2, whereas Debian 11
uses GCC 10.2.1.
2. Xen requires mandatory some Z extensions, but GCC 10.2.1 does not
support Z extensions in -march, causing the compilation to fail.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
There are a bunch of tests in tools/tests/, let them run in CI.
For each subdirectory expect "make run" will run the test, and observe
its exit code. This way, adding new tests is easy, and they will be
automatically picked up.
For better visibility, log test output to junit xml format, and let
gitlab ingest it. Set SUT_ADDR variable with name/address of the system
under test, so a network can be used to extract the file. The actual
address is set using DHCP. And for the test internal network, still add
the 192.168.0.1 IP (but don't replace the DHCP-provided one).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@amd.com>
With the recent fixes, Dom0less direct mapped domains can use PV
drivers. Extend the existing static-mem test with a PV network ping
tests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Rework the container to be non-root, use heredocs for readability, and
use apt-get --no-install-recommends to keep the size down. Rename the
job to x86_32, to be consistent with XEN_TARGET_ARCH and the
naming scheme of all the other CI jobs:
${VERSION}-${ARCH}-${BUILD_NAME}
Remove build dependencies for building QEMU. The absence of ninja/meson means
that the container hasn't been able to build QEMU in years.
Remove build dependencies for the documentation as we don't have to
build it for every single arch.
This reduces the size of the container from 2.22GB to 1.32Gb.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Rework the container to use heredocs for readability, and use
apt-get --no-install-recommends to keep the size down.
This reduces the size of the (uncompressed) container from 3.44GB to
1.97GB.
The container is left running the builds and tests as root. A
subsequent patch will make the necessary changes to the test scripts
to allow test execution as a non-root user.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add x86_64 hardware test that creates a Xen Argo communication
connection between two PVH domains. In the test, dom0 creates a domU and
listens for messages sent by the domU through Argo.
To accomplish this, build Xen with CONFIG_ARGO=y and create a CI test job.
Update the xilinx x86_64 test script to support the new test, and add
"sync_console" to command line to avoid an issue with console messages
being lost.
Requested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Right now, various blocks rewrite domU_config= as a whole, even though it is
largely the same.
* dom0pvh-hvm does nothing but change the domain type to hvm
* *-pci sets the domain type, clears vif=[], appends earlyprintk=xen to the
cmdline, and adds some PCI config.
Refactor this to be domU_type (defaults to pvh), domU_vif (defaults to
xenbr0), and domU_extra_config (defaults to empty) and use these variables to
build domU_config= once.
Of note, the default domU_config= now sets cmdline=, and extra= is intended
for inclusion via domU_extra_config as necessary.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Andrew Cooper