xm migrate would do non-live migration (effectively, save, transfer
and restore) by default, unless you specified --live.
xl migrate always does live migration. Honour (by ignoring) --live
for compatibility with old callers. Document this.
(This patch should be backported as far as possible.)
Reported-by: Matthew Vernon <mcv21@cam.ac.uk>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Matthew Vernon <mcv21@cam.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Note that the example is done on Midway whose SMMU driver is not
supported on Xen upstream.
Currently, I don't have other platform where I can test Device Tree
passthrough.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The partial device tree may contains phandle. The Device Tree Compiler
tends to allocate the phandle from 1.
Reserve the ID 65000 for the GIC phandle. I think we can safely assume
that the partial device tree will never contain a such ID.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Allow the user to pass additional nodes to the guest device tree. For
this purpose, everything in the node /passthrough from the partial
device tree will be copied into the guest device tree.
The node /aliases will be also copied to allow the user to define
aliases which can be used by the guest kernel.
A simple partial device tree will look like:
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <2>;
passthrough {
compatible = "simple-bus";
ranges;
#address-cells = <2>;
#size-cells = <2>;
/* List of your nodes */
}
};
Note that:
* The interrupt-parent property will be added by the toolstack in
the root node
* The properties compatible, ranges, #address-cells and #size-cells
in /passthrough are mandatory.
The helpers provided by the libfdt don't perform all the necessary
security check on a given device tree. Therefore, only trusted device
tree should be used.
Note: The partial device tree code requires the presence of libfdt
functions which have been only correctly exported in libfdt 1.4.0 and
higher. All the major distributions but Debian Wheezy are using v1.4.0
or higher. It has been decided to disable partial device tree support on
OSes where libfdt doesn't meet the requirement.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Usage:
vga="qxl"
Qxl vga support many resolutions that not supported by stdvga,
mainly the 16:9 ones and other high up to 2560x1600.
With QXL you can get improved performance and smooth video also
with high resolutions and high quality.
Require their drivers installed in the domU and spice used
otherwise act as a simple stdvga.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Zhou Peng <zpengxen@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Add the specification for a new migration stream format. The document
includes all the details but to summarize:
The existing (legacy) format is dependant on the word size of the
toolstack. This prevents domains from migrating from hosts running
32-bit toolstacks to hosts running 64-bit toolstacks (and vice-versa).
The legacy format lacks any version information making it difficult to
extend in compatible way.
The new format has a header (the image header) with version information,
a domain header with basic information of the domain and a stream of
records for the image data.
The format will be used for future domain types (such as on ARM).
The specification is pandoc format (an extended markdown format) and the
documentation build system is extended to support pandoc format documents.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
A top level EPT parameter "ept=<options>" and a sub boolean "opt_pml_enabled"
are added to control PML. Other booleans can be further added for any other EPT
related features.
The document description for the new parameter is also added.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Kevin Tian <kevin.tian@intel.com>
For top-level targets which use more than a single program to produce content
(txt already, pdf once pandoc is supported), these current checks are
unsuitable.
By moving the the install checks to the rules which actually use the programs,
it is now possible to build a subset of a top-level target depending on the
installed programs.
As a bonus, it removes the need to recurse for txt, man-pages and pdf targets.
A side effect of this is that every individual source which cannot be
generated will have a specific message logged, giving the file and program.
As such, these message are updated to consistently report the target file
which was not generated.
Finally, update "ifdef foo" to "ifneq($(foo),)" to be more resilient to errors
caused by having foo defined as an empty string.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In this patch we mechanically rename mem_event to vm_event. This patch
introduces no logic changes to the code. Using the name vm_event better
describes the intended use of this subsystem, which is not limited to memory
events. It can be used for off-loading the decision making logic into helper
applications when encountering various events during a VM's execution.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When a device is marked for passthrough (via the new property
"xen,passthrough"), dom0 must not access to the device (i.e not
loading a driver), but should be able to manage the MMIO/interrupt
of the passthrough device.
The latter part will allow the toolstack to map MMIO/IRQ when a device
is pass through to a guest.
The property "xen,passthrough" will be translated as 'status="disabled"'
in the device tree to avoid DOM0 using the device. We assume that DOM0 is
able to cope with this property (already the case for Linux, and
required by ePAPR).
Rework the function map_device (renamed into handle_device) to:
* For a given device node:
- Give permission to manage IRQ/MMIO for this device
- Retrieve the IRQ configuration (i.e edge/level) from the device
tree
* When the device is not marked for guest passthrough:
- Assign the device to the guest if it's protected by an IOMMU
- Map the IRQs and MMIOs regions to the guest
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 2090f14c5c ("sysctl: make XEN_SYSCTL_topologyinfo sysctl a
little more efficient") renamed XEN_SYSCTL_topologyinfo to
XEN_SYSCTL_cputopoinfo.
It, however, neglected to update this macro for flask-related files.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This allows for early-printk to be specified (for existing UARTS at
least) without the need to edit Rules.mk.
The existing shortcuts are retained, but in a much more compact
fashion.
An unused EARLY_PRINTK_BAUD was removed from the zynqmq settings.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Several users have reported that their available free memory in the
guest when they used maxmem >> memory was much smaller than when
maxmem == memory. This is the unavoidable consequence of how
ballooning works, but it's not something users expect.
Warn them of this effect in the place we tell them how to make it
happen, so they aren't surprised.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since b642ed6775 making docs
fail with:
man/xl.cfg.pod.5 around line 273: Unterminated B<...> sequence
POD document had syntax errors at /usr/bin/pod2text line 84.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
instead of just list of single pCPUs or NUMA node IDs, as
it happens right now.
On the other hand, after this change, strings containing
pCPUs and NUMA node ranges is supported. The syntax is the
same one supported by the "cpus" and "cpus_soft" config
switch, i.e., "4-8" or "node:1,12-18,^14".
This make things more flexible, more consistent, and also
improves error handling, as the pCPU range parsing routine
already present in xl is more reliable than just a call
to atoi().
While there, remove a redundant error check in the legacy syntax
handling (libxl_bitmap_test() already checks the index being
within the size of the bitmap).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Juergen Gross <JGross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
in fact, right now, xl sub-commands 'cpupool-cpu-add' and
'cpupool-cpu-remove' only accept the specification of one
pCPU to be added or removed to/from a cpupool.
With this change, they can deal with ranges, like "4-8",
or "node:1,12-18,^14". The syntax is exactly the same one
that is supported by the 'vcpu-pin' subcommand, and
specifying just one pCPU still works, of course.
This make things more flexible, more consistent, and also
improves error handling, as the pCPU range parsing routine
already present in xl is more reliable than just a call
to atoi().
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Juergen Gross <JGross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The definitions of static device labels must be placed at the end of the
policy.conf before passing it to checkpolicy; the existing examples
(which are commented out) are in the wrong location. Create a new file
for device contexts which will place them in the proper location.
This also removes some directions about using the xen policy type in
checkpolicy which is no longer needed.
Reported-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The way this method works allows for honoring "warm" reboot requested
by the user and additionally has a way to power-cycle the machine.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
By default we will always use EFI reboot mechanism when
running under EFI platforms. However some EFI platforms
are buggy and need to use the ACPI mechanism to
reboot (such as Lenovo ThinkCentre M57). As such
respect the 'reboot=' override and DMI overrides
for EFI platforms.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- BOOT_INVALID is just zero
- also consider acpi_disabled in BOOT_INVALID resolution
- duplicate BOOT_INVALID resolution in machine_restart()
- don't fall back from BOOT_ACPI to BOOT_EFI (if it was overridden, it
surely was for a reason)
- adjust doc change formatting
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This unifies the flask_enforcing and flask_enabled boot parameters into
a single parameter with additional states. Defined options are:
enforcing - require policy to be loaded at boot time and enforce it
permissive - a missing or broken policy does not panic
disabled - revert to dummy (no XSM) policy. Was flask_enabled=0
late - bootloader policy is not used; later loadpolicy is enforcing
The default mode remains "permissive" and the flask_enforcing boot
parameter is retained for compatibility. If flask_enforcing=1 is
specified and flask= is not, the bootloader policy will be loaded in
enforcing mode if present, but errors will disable access controls until
a successful loadpolicy instead of causing a panic at boot.
Suggested-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... by introducing a "dom0_nodes" option augmenting the "dom0_mem" and
"dom0_max_vcpus" ones.
Note that this gives meaning to MEMF_exact_node specified alone (i.e.
implicitly combined with NUMA_NO_NODE): In such a case any node inside
the domain's node mask is acceptable, but no other node. This changed
behavior is (implicitly) being exposed through the memop hypercalls.
Note further that this change doesn't take care of moving the initrd
image into memory matching Dom0's affinity when the initrd doesn't get
copied (because of being part of the initial mapping) anyway.
And note finally that this doesn't get us meaningfully closer to
handing vNUMA information to Dom0 (which will require the current
striping of allocations to become node-specific in order for the passed
on information to be meaningful).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@cirix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... and make it tunable via the command line.
1/8 of RAM is 128M on a 1GB system and 256M on a 2GB system etc,
which is a lot. 1/32 of RAM seems more reasonable. Also drop the
minimum to 32M.
Leave the maximum at 1GB.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jan Beulich <JBeulich@suse.com>
NMI watchdog sets APIC_LVTPC register to generate an NMI when PMU counter
overflow occurs. This may be overwritten by VPMU code later, effectively
turning off the watchdog.
We should disable VPMU when NMI watchdog is running.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Usage:
spice_streaming_video=[filter|all|off]
Specifies what streaming video setting is to be used by spice (if
given),
otherwise the qemu default will be used.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Usage:
spice_image_compression=[auto_glz|auto_lz|quic|glz|lz|off]
Specifies what image compression is to be used by spice (if given),
otherwise the qemu default will be used.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Ian Jackson
Olaf Hering
Julien Grall
Andrew Cooper
Giuseppe Mazzotta
Fabio Fantoni
David Vrabel
Kai Huang
Ian Campbell
Tamas K Lengyel
Boris Ostrovsky
George Dunlap
Riku Voipio
Dario Faggioli
Daniel De Graaf
Wei Liu
Jan Beulich
Konrad Rzeszutek Wilk
Edgar E. Iglesias
Vijaya Kumar K
Chao Peng
Oleksandr Tyshchenko
Quan Xu