This adds an option to the xl domain configuration file syntax for specifying
a kernel command line for device-model stubdomains. It is intended for use with
Linux-based stubdomains.
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Bypass taking ownership of the TPM2 if an srk_handle is specified.
This srk_handle must be usable with Null auth for the time being.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The vtpmmgr TPM 2.0 support is incomplete. Add a warning about that to
the documentation so others don't have to work through discovering it is
broken.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Introduce an option to allow selecting a behavior similar to the pre
Xen 4.15 one for accesses to MSRs not explicitly handled. Since commit
84e848fd7a and 322ec7c89f accesses to MSRs not explicitly
handled by Xen result in the injection of a #GP to the guest. This
is a behavior change since previously a #GP was only injected if
accessing the MSR on the real hardware would also trigger a #GP, or if
the attempted to be set bits wouldn't match the hardware values (for
PV). The reasons for not leaking hardware MSR values and injecting a
#GP are fully valid, so the solution proposed here should be
considered a temporary workaround until all the required MSRs are
properly handled.
This seems to be problematic for some guests, so introduce an option
to fallback to this kind of legacy behavior without leaking the
underlying MSR values to the guest.
When the option is set, for both PV and HVM don't inject a #GP to the
guest on MSR read if reading the underlying MSR doesn't result in a
#GP, do the same for writes and simply discard the value to be written
on that case.
Note that for guests restored or migrated from previous Xen versions
the option is enabled by default, in order to keep a compatible
MSR behavior. Such compatibility is done at the libxl layer, to avoid
higher-level toolstacks from having to know the details about this flag.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Add a global option "-T" to xl to enable timestamps in the output from
libxl and libxc. This is most useful with long running commands such
as "migrate".
During 'xl -v.. migrate domU host' a large amount of debug is generated.
It is difficult to map each line to the sending and receiving side.
Also the time spent for migration is not reported.
With 'xl -T migrate domU host' both sides will print timestamps and
also the pid of the invoked xl process to make it more obvious which
side produced a given log line.
Note: depending on the command, xl itself also produces other output
which does not go through libxentoollog. As a result such output will
not have timestamps prepended.
This change adds also the missing "-t" flag to "xl help" output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Replace all hardcoded paths to use XEN_SCRIPT_DIR to expand the actual
location.
[ .gitignore change split out -iwj ]
[ dropped erroneous hunk for docs/misc/block-scripts.txt iwj ]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
xl(1) opens xl.conf in XEN_CONFIG_DIR.
Substitute this variable also in the man page.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Maybe xm create had a feature to create a domU based on a configuration
file. xl create requires the '-f' option to refer to a file.
There is no code to look into XEN_CONFIG_DIR, so remove the example.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Document that on NetBSD, the tap interface will be configured by the
qemu-ifup script.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
If Viridian extensions are enabled, Windows wouldn't currently allow
a hotplugged vCPU to be brought up dynamically. We need to expose a special
bit to let the guest know we allow it. Hide it behind an option to stay
on the safe side regarding compatibility with existing guests but
nevertheless set the option on by default.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
TLFS 7.8.1 stipulates that "a virtual processor index must be less than
the maximum number of virtual processors per partition" that "can be obtained
through CPUID leaf 0x40000005". Furthermore, "Requirements for Implementing
the Microsoft Hypervisor Interface" defines that starting from Windows Server
2012, which allowed more than 64 CPUs to be brought up, this leaf can now
contain a value -1 basically assuming the hypervisor has no restriction while
0 (that we currently expose) means the default restriction is still present.
Along with the previous changes exposing ExProcessorMasks this allows a recent
Windows VM with Viridian extension enabled to have more than 64 vCPUs without
going into BSOD in some cases.
Since we didn't expose the leaf before and to keep CPUID data consistent for
incoming streams from previous Xen versions - let's keep it behind an option.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Since assignable devices can be named, a subsequent patch will support use
of a PCI_SPEC_STRING containing a 'name' parameter instead of a 'bdf'. In
this case the name will be used to look up the 'bdf' in the list of assignable
(or assigned) devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
A subsequent patch will introduce code to allow a name to be specified to
'xl pci-assignable-add' such that the assignable device may be referred to
by than name in subsequent operations.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
Since assignable devices can be named, a subsequent patch will support use
of a PCI_SPEC_STRING containing a 'name' parameter instead of a 'bdf'. In
this case the name will be used to look up the 'bdf' in the list of assignable
(or assigned) devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
A subsequent patch will introduce code to allow a name to be specified to
'xl pci-assignable-add' such that the assignable device may be referred to
by than name in subsequent operations.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Currently the documentation completely fails to mention the existence of
PCI_SPEC_STRING. This patch tidies things up, specifically clarifying that
'pci-assignable-add/remove' take <BDF> arguments where as 'pci-attach/detach'
take <PCI_SPEC_STRING> arguments (which will be enforced in a subsequent
patch).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and prepare for adding support for non-positional parsing of 'bdf' and
'vslot' in a subsequent patch.
Also document 'BDF' as a first-class parameter type and fix the documentation
to state that the default value of 'rdm_policy' is actually 'strict', not
'relaxed', as can be seen in libxl__device_pci_setdefault().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and put it into a new xl-pci-configuration(5) manpage, akin to the
xl-network-configration(5) and xl-disk-configuration(5) manpages.
This patch moves the content of the section verbatim. A subsequent patch
will improve the documentation, once it is in its new location.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Adding the new value into the enumeration makes it immediately available
to xl, so this patch adjusts the xl.cfg(5) documentation accordingly.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Only spelling errors; no functional changes.
In docs/misc/dump-core-format.txt there are a few more instances of
'informations'. I'll leave that up to someone who can properly determine
how those sentences should be constructed.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The Xenstore access commands (xenstore-*) have the possibility to limit
connection to Xenstore to a local socket (option "-s"). This is an
option making no sense at all, as either there is only a socket, so
the option would be a nop, or there is no socket at all (in case
Xenstore is running in a stubdom or the client is called in a domU),
so specifying the option would just lead to failure.
So drop that option completely.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The manpage for 'xl' documents an option to force a block device to be
released even if the domain to which it is attached does not co-operate.
The documentation also states that, if the force flag is not specified, the
block-detach operation should fail.
Currently the force option is not implemented and a non-forced block-detach
will auto-force after a time-out of 10s. This patch implements the force
option and also stops auto-forcing a non-forced block-detach by calling
libxl_device_disk_safe_remove() rather than libxl_device_disk_remove(),
allowing the operation to fail cleanly as per the documented behaviour.
NOTE: The documentation is also adjusted since the normal positioning of
options is before compulsory parameters. It is also noted that use of
the --force option may lead to a guest crash.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch adds code to parse a value for MTU from the network configuration
if it is present. The documentation in xl-network-configuration.5.pod is
also modified accordingly.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
`xl shutdown -w` waits for the first of either domain shutdown or death.
Shutdown is the halting of the guest operating system, and death is the
freeing of domain resources.
Allow specifying -w multiple times to wait for only domain death. This
is useful in scripts so that all resources are free before the script
continues.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
This is partly to adjust the description of 'k' and 's' seeing as they have
changed, but mostly restructuring the information for clarity.
In particular, use indentation to clearly separate the areas discussing libxl
format from xend format. In addition, extend the xend format section to
discuss subleaf notation.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
... and, if it is not created, make the top level 'device' node in
xenstore writable by the guest instead.
The purpose and semantics of the suspend event channel node are explained
in xenstore-paths.pandoc [1]. It was originally introduced in xend by
commit 17636f47a4 "Teach xc_save to use event-channel-based domain
suspend if available.". Note that, because, the top-level frontend
'device' node was created writable by the guest in xend, there was no
need to explicitly create the 'suspend-event-channel' node as a writable
node.
However, libxl creates the 'device' node as read-only by the guest and so
explicit creation of the 'suspend-event-channel' node is necessary to make
it usable. This unfortunately has the side-effect of making some old
Windows PV drivers [2] cease to function. This is because they scan the top
level 'device' node, find the 'suspend' node and expect it to contain the
usual sub-nodes describing a PV frontend. When this is found not to be the
case, enumeration ceases and (because the 'suspend' node is observed before
the 'vbd' node) no system disk is enumerated. Windows will then crash with
bugcheck code 0x7B (missing system disk).
This patch adds a boolean 'xend_suspend_evtchn_compat' field into
libxl_create_info and a similarly named option in xl.cfg to set it.
If the value is true then the xenstore node is not created. Instead the
old xend behaviour of making top level device node writable by the guest is
re-instated. If the value is false (the default) then the current libxl
behaviour persists.
xenstore-paths.pandoc is also modified to say that the suspend event
channel node may not exist and, if it does not exist, then the guest may
create it. A note is also added concerning the writability of the top
level device node.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/xenstore-paths.pandoc;hb=HEAD#l177
[2] https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/5/html/para-virtualized_windows_drivers_guide/sect-para-virtualized_windows_drivers_guide-installing_and_configuring_the_para_virtualized_drivers-installing_the_para_virtualized_drivers
NOTE: While adding the new LIBXL_HAVE_CREATEINFO_... definition into
libxl.h, this patch corrects the previous stanza which erroneously
implies libxl_domain_create_info is a function.
Signed-off-by: Paul Durrant <paul@xen.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds a '-D' command line option to save and migrate to allow
the domain id to be incorporated into the saved domain configuration and
hence be preserved.
NOTE: Logically it may seem as though preservation of domid should be
dealt with by libxl, but the libxl migration stream has no record
in which to transfer domid and remote domain creation occurs before
the migration stream is parsed. Hence this patch modifies xl rather
then libxl.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch adds a new global 'domid_policy' configuration option to decide
how domain id values are allocated for new domains. It may be set to one of
two values:
"xen", the default value, will cause an invalid domid value to be passed
to do_domain_create() preserving the existing behaviour of having Xen
choose the domid value during domain_create().
"random" will cause the special RANDOM_DOMID value to be passed to
do_domain_create() such that libxl__domain_make() will select a random
domid value.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Xen used to have single, system-wide limits for the number of grant
frames and maptrack frames a guest was allowed to create. Increasing
or decreasing this single limit on the Xen command-line would change
the limit for all guests on the system.
Later, per-domain limits for these values was created. The system-wide
limits became strict limits: domains could not be created with higher
limits, but could be created with lower limits. However, that change
also introduced a range of different "default" values into various
places in the toolstack:
- The python libxc bindings hard-coded these values to 32 and 1024,
respectively
- The libxl default values are 32 and 1024 respectively.
- xl will use the libxl default for maptrack, but does its own default
calculation for grant frames: either 32 or 64, based on the max
possible mfn.
These defaults interact poorly with the hypervisor command-line limit:
- The hypervisor command-line limit cannot be used to raise the limit
for all guests anymore, as the default in the toolstack will
effectively override this.
- If you use the hypervisor command-line limit to *reduce* the limit,
then the "default" values generated by the toolstack are too high,
and all guest creations will fail.
In other words, the toolstack defaults require any change to be
effected by having the admin explicitly specify a new value in every
guest.
In order to address this, have grant_table_init treat negative values
for max_grant_frames and max_maptrack_frames as instructions to use the
system-wide default, and have all the above toolstacks default to passing
-1 unless a different value is explicitly configured.
This restores the old behavior in that changing the hypervisor command-line
option can change the behavior for all guests, while retaining the ability
to set per-guest values. It also removes the bug that reducing the
system-wide max will cause all domains without explicit limits to fail.
NOTE: - The Ocaml bindings require the caller to always specify a value,
and the code to start a xenstored stubdomain hard-codes these to 4
and 128 respectively; this behavour will not be modified.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Changesets 319f9a0ba9 ("passthrough: quarantine PCI devices") and
ba2ab00bbb ("IOMMU: default to always quarantining PCI devices")
introduced PCI device "quarantine" behavior, but did not document how
the pci-assignable-add and -remove functions act in regard to this.
Rectify this.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty. We actually need all of
the following to be specifiable:
* "default": enable PT iff we have devices to
pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.
Defaulting and error checking should be done in libxl. So, we make
several changes here.
We introduce "enabled", and rename "unknown" to "default".
We move all of the error checking and defaulting code from xl into
libxl. Now, libxl__domain_config_setdefault has all of the necessary
information to get this right. So we can do it all there. Choosing
the specific mode is arch-specific.
We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).
xl now only has to parse the enum in the same way as it parses all
other enums.
This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified. We restore this behaviour.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien@xen.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Andrew Cooper <Andrew.Cooper3@citrix.com>
CC: Paul Durrant <pdurrant@gmail.com>
CC: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Specifically
* xen.org to xenproject.org
* http to https
* Replaced pages where page has moved
(including on xen pages as well as external pages)
* Removed some URLs (e.g. downloads for Linux PV drivers)
Tested-by: Lars Kurth <lars.kurth@citrix.com>
Signed-off-by: Lars Kurth <lars.kurth@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
The "TO BE DOCUMENTED" section of the xl man page still references
tmem. So does the xl.conf man page. Remove the references.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
...and hence the ability to disable IOMMU mappings, and control EPT
sharing.
This patch introduces a new 'libxl_passthrough' enumeration into
libxl_domain_create_info. The value will be set by xl either when it parses
a new 'passthrough' option in xl.cfg, or implicitly if there is passthrough
hardware specified for the domain.
If the value of the passthrough configuration option is 'disabled' then
the XEN_DOMCTL_CDF_iommu flag will be clear in the xen_domctl_createdomain
flags, thus allowing the toolstack to control whether the domain gets
IOMMU mappings or not (where previously they were globally set).
If the value of the passthrough configuration option is 'sync_pt' then
a new 'iommu_opts' field in xen_domctl_createdomain will be set with the
value XEN_DOMCTL_IOMMU_no_sharept. This will override the global default
set in iommu_hap_pt_share, thus allowing the toolstack to control whether
EPT sharing is used for the domain.
If the value of passthrough is 'enabled' then xl will choose an appropriate
default according to the type of domain and hardware support.
NOTE: The 'iommu_memkb' overhead in libxl_domain_build_info will now only
be set if passthrough is 'sync_pt' (or xl has chosen this mode as
a default).
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This enumeration controls TEE type for a domain. Currently there is
two possible options: either 'none' or 'optee'.
'none' is the default value and it basically disables TEE support at
all.
'optee' enables access to the OP-TEE running on a host machine. This
requires special OP-TEE build with virtualization support enabled.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Blktap2 is effectively dead for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. libxl no longer supports TAP disk backend, with appropriate assertions
added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend
3. Remove blktap2 entry from MAINTAINERS
A patch to remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Each HVM guest currently gets a vkbd frontend/backend pair (c/s ebbd2561b4).
This consumes host resources unnecessarily for guests that have no use for
vkbd. Make this behaviour tunable to allow an administrator to choose. The
commit retains the current behaviour -- HVM guests still get vkdb unless
specified otherwise.
Signed-off-by: Eslam Elnikety <elnikety@amazon.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
mem-set is the primary command that users will need to use and
understand. Move it first, and clarify the wording; also specify that
you can't set the target higher than maxmem from the domain config.
mem-max is actually a pretty useless command at the moment. Clarify
that users are not expected to use it; and document all of its quirky
behavior.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Lars Kurth <lars.kurth@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch introduces an implementation of the STIMER0-15_CONFIG/COUNT MSRs
and hence a the first SynIC message source.
The new (and documented) 'stimer' viridian enlightenment group may be
specified to enable this feature.
While in the neighbourhood, this patch adds a missing check for an
attempt to write the time reference count MSR, which should result in an
exception (but not be reported as an unimplemented MSR).
NOTE: It is necessary for correct operation that timer expiration and
message delivery time-stamping use the same time source as the guest.
The specification is ambiguous but testing with a Windows 10 1803
guest has shown that using the partition reference counter as a
source whilst the guest is using RDTSC and the reference tsc page
does not work correctly. Therefore the time_now() function is used.
This implements the algorithm for acquiring partition reference time
that is documented in the specifiction.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove "chatty" and redundant information from the xl man page;
restrict it to functional descriptions only, and point instead to
qemu-depriv.pandoc and SUPPORT.md as locations for "canonical"
information.
Add a man page entry for device_model_user.
Update qemu-deprivilege.pandoc:
Changes in missing feature list:
- Migration is functional
- But qdisk backends are not
Add a missing restriction list.
The following statements from the man page are dropped:
- Mentioning PV; PV guests never have a device model.
- Drop the confusing statement about stdvga and cirrus vga options.
- Re-used domain IDs are now handled.
- Device models should no longer be able to create world-readable
files on dom0's filesystem.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Scott Davis