bbed98e7ce "xenpmd.c: use dynamic allocation" had a hard tab.
I thought we had fixed that and I thought I had checked.
Remove it now.
Signed-off-by: Ian Jackson <iwj@xenproject.org>
On NetBSD, d_name is larger than 256, so file_name[284] may not be large
enough (and gcc emits a format-truncation error).
Use asprintf() instead of snprintf() on a static on-stack buffer.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Plus
define GNU_SOURCE for asprintf()
Harmless on NetBSD.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Add a check for snprintf return code and ignore the entry if we get an
error. This should in fact never happen and is more a trick to make gcc
happy and prevent compilation errors.
This is solving the following gcc warning when compiling for arm32 host
platforms with optimization activated:
xenpmd.c:92:37: error: '%s' directive output may be truncated writing
between 4 and 2147483645 bytes into a region of size 271
[-Werror=format-truncation=]
This is also solving the following Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=970802
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
Switch all usages of xs_daemon_open*() and xs_domain_open() to use
xs_open() instead. While at it switch xs_daemon_close() users to
xs_close().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
32 bit gcc 8.1 non-debug build yields:
xenpmd.c:354:23: error: '%02x' directive output may be truncated writing between 2 and 8 bytes into a region of size 3 [-Werror=format-truncation=]
snprintf(val, 3, "%02x",
^~~~
xenpmd.c:354:22: note: directive argument in the range [40, 2147483778]
snprintf(val, 3, "%02x",
^~~~~~
xenpmd.c:354:5: note: 'snprintf' output between 3 and 9 bytes into a destination of size 3
snprintf(val, 3, "%02x",
^~~~~~~~~~~~~~~~~~~~~~~~
(unsigned int)(9*4 +
~~~~~~~~~~~~~~~~~~~~
strlen(info->model_number) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->serial_number) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->battery_type) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->oem_info) + 4));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All info->* used in calculation are 32 bytes long, and the parsing
code makes sure they are null-terminated, so the end result of the
expression won't exceed 255, which should be able to be fit into 3
bytes in hexadecimal format.
Add an assertion to make gcc happy.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
GCC 7.1.1 complains that several buffers passed to snprintf() in xenpmd
and tools/ocmal/xc are too small to hold the largest possible resulting string,
which is calculated by adding up the maximum length of all the substrings.
The warnings are treated as errors by -Werror, and goes like this (abbreviated):
xenpmd.c:94:36: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_INFO_FILE_PATH "/proc/acpi/battery/%s/info"
^
xenpmd.c:113:13: note: ‘snprintf’ output between 25 and 280 bytes into a
destination of size 32
xenpmd.c:95:37: error: ‘%s’ directive output may be truncated writing up to
255 bytes into a region of size 13 [-Werror=format-truncation=]
#define BATTERY_STATE_FILE_PATH "/proc/acpi/battery/%s/state"
^
xenpmd.c:116:13: note: ‘snprintf’ output between 26 and 281 bytes into a
destination of size 32
xenctrl_stubs.c:65:15: error: ‘%s’ directive output may be truncated writing
up to 1023 bytes into a region of size 252 [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^~
xenctrl_stubs.c:64:4: note: ‘snprintf’ output 5 or more bytes (assuming 1028)
into a destination of size 256
Enlarge the size of these buffers as suggested by the complier
(and slightly rounded) to fix the warnings.
No functional changes.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The xenstore header xs.h is producing conflicts with other software[1].
xs is a too short identifier and does not matche the library. Renaming
the headers to xenstore.h and xenstore_lib.h is the easiest way to make
them easy recognizable and prevent furthe problems.
[1]: http://bugs.debian.org/668550
[ Also update QEMU_TAG, to bring in corresponding change to
qemu-xen-traditional. -iwj ]
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
--HG--
rename : tools/xenstore/xs.h => tools/xenstore/xenstore.h
rename : tools/xenstore/xs_lib.h => tools/xenstore/xenstore_lib.h
Create two new variables called APPEND_ and PREPEND_ to add compile
flags at the beginning or at the end of the search path.
Added a new semantic for user defined compile flags, here is the list
of possible options:
PREPEND_LIB: add libraries to the search path before xen
(before xen installation folders).
PREPEND_INCLUDES: add headers to the search path before xen
(before xen installation folders).
APPEND_LIB: add libraries to the search path at the end
(after all xen installation folders have been added).
APPEND_INCLUDES: add libraries to the search path at the end
(after all xen installation folders have been added).
EXTRA_INCLUDES and EXTRA_LIB can still be used, and they will have the
same effect as PREPEND_INCLUDES and PREPEND_LIB.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Linker command lines are order-sensitive.
Move linker options -Lfoo -lfoo from LDFLAGS to LDLIBS and place this new
variable after the objects to link. This resolves build errors in xenpagin
and blktap with recent toolchains.
rename SHLIB_CFLAGS to SHLIB_LDFLAGS
rename LDFLAGS_* to LDLIBS_*
move LDFLAGS usage after CFLAGS in CC calls
remove stale comments in xenpaging Makefile
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If you use -MMD -MF then the correct .o filename is written to the
.*.d file as the compiler driver arranges everything. This was done
in 19010:275abe1c5d24 for the hypervisor.
In this patch we do the same elsewhere in the xen-unstable tree,
particularly tools/. Specifically:
* Change tools/Rules.mk to add -MMD -MF ... to CFLAGS and set DEPS.
* Remove -Wp,-MD... from every other Makefile
* Remove setting of DEPS from every other Makefile
* Ensure that every Makefile says -include $(DEPS)
* Ensure that every Makefile's clean target removes $(DEPS)
Some Makefiles were already halfway there, but often for a different
variable name eg PROG_DEP. The variable name is now standardised in
Rules.mk as DEPS.
I have done a test build with this change, on Debian etch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Anthony PERARD