This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Libnl3 is required for controlling Remus network buffering.
This patch adds dependency on libnl3 (>= 3.2.8) to autoconf scripts.
It also provides the ability to configure tools without libnl3 support
i.e., without network buffering support.
When there is no network buffering support, libxl__netbuffer_enabled()
returns 0, otherwise returns 1. The callers of this api will be
introduced in the rest of the series.
NOTE: This patch changes tools/configure.ac, please rerun
autogen.sh while applying the patch.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This adds the systemd xen service / module files and integrates
support into the build system.
This goes in with AX_AVAILABLE_SYSTEMD() which will enable
systemd if development libraries have been found on your
build system. If you don't have systemd on target systems
for binaries built with systemd then the binary will not
work, you must explicitly disable systemd support if you
do not want to build systemd support.
When systemd libraries are present only systems that
have booted into systemd go through the systemd initialization,
otherwise the SysVinit is used.
These are originally based on the Fedora systemd files.
Changes made from Fedora's systemd files:
* split sockets into two files to claim different permissions
* Use /bin/sh -c exec to for a simple launcher implementation
* enables systemd socket activation for C xenstored and Ocaml
oxenstored
* use sd_notify(), so change the service to Type=notify, because of
this we remove the PIDFile specification as we don't care for it, and let
systemd do its magic for us, this also means we don't have to fork
so we use --no-fork with systemd
* defines a modules-load.d, its original source file will be shared
between systemd and old init systems
* simplify service files with ConditionVirtualization=xen which uses
the built in systemd virtualization backend detection, these
service files will not be available to start on systems that do not
boot with xen as a hypervisor
* use autoconf to replace @variable@ paths for us which piggy
backs on top of the latest autoconf changes to xen
* removes oxenstored service file in favor of a system variable which
controls which which xentored to use at run time, we avoid multiple
service files this way.
* simplifies startup to not require polling on the sockets
as initial socket management is handled by systemd, we just
take on the socket later once anything pokes at it, a simple nc -U
(as root) on any of the sockets files can activate the service for example.
Anything queued up will be sent to us once we start. Socket activation
should in theory also let us dynamically switch between xenstores but more
importantly we could upgrade xenstored while keeping all active
socket communication queued up, but in order to take advantage of
this we eventually would need to remove the requirement of not being
able to bring down the xenstored. Even though active sockets are
supported since most libxl communication doesn't triggger a check
on the unix socket first administrators are encouraged to enable
the xenstored.service to triggger an initialization of the xenstored
upon bring up. Some systems also never use unix sockets for
communication with the xenstored and as such active sockets will
not be used there.
* allow for xenstored configuration through *either* of these
configuration files:
- /etc/sysconfig/xenstored
- /etc/default/xenstored
The /etc/default/xenstored will let debian based systems do
the same, while SUSE/OpenSUSE/Fedora/RedHat can keep on chugging
with sysconfig. We leave these files all commented out by default
though given that for systemd we want to encourage not using them.
* ensures we create the run directory as most systems will likely
be using a tmpfs for run dirs for the pid files
* Some systems define the selinux context in the systemd Option for the
/var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify the
context on their system /etc/default/xenstored or /etc/sysconfig/xenstored
$XENSTORED_MOUNT_CTX variable, with a default to none.
* takes advantage of the shared xendomains helper for the xendomains
service
* Add the new dom0 that gets kicked off for disk backend access into
its own systemd service associated to xen
We end up with these systemd files:
General requirements:
* proc-xen.mount
* var-lib-xenstored.mount
xenstored:
* xenstored.service
* xenstored.socket
* xenstored_ro.socket
* xenconsoled.service
* xen-qemu-dom0-disk-backend.service.in
Optional:
* xendomains.service
* xen-watchdog.service
As for integration with xen, we house keep all the systemd files
under a new directory tools/hotplug/Linux/systemd/ and will be targeted
by default when building on Linux systems if systemd development
libraries are present at build time.
The systemd files will be sanitized for meta @VARIABLES@ upon
configuration and installed upon the install target. Systems that
do not use systemd can still get systemd service unit files installed
if the build system enabled systemd support, this however does not
mandate a requirement of having systemd libraries present. Old init
scripts are always installed.
If you don't specify a prefix you will end up with the services
files under /usr/local/lib/systemd/system/ by default, and systemd
modules-load.d conf files under /usr/local/lib/modules-load.d/ which
systemd does look for (although it seems this is not documented).
Distributions are expected to provide their /usr/ prefix to end up in
the more generic location upon distribution install at
/usr/lib/systemd/system/ and /usr/lib/modules-load.d/ respectively.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jan Rękorajski <baggins@pld-linux.org>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Jacek Konieczny <jajcus@jajcus.net>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
Support
./configure --host=x86_64-rumpxen-netbsd
./configure --host=i386-rumpxen-netbsd
Setting --host tells configure we are cross compiling and therefore
has various automatic effects.
But in this patch we make some deliberate changes as well:
* We disable a large number of configure tests for libraries
etc. which don't exist.
* We set CONFIG_RUMP in Tools.mk.
* Hence, we automatically set XEN_OS.
(I have only tested the 32-bit build but I think the 64-bit build
should work just as well.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v3: Add comment to `fi'
v2: Mention x86_64.
Drop an erroneous whitespace change.
blktap2 will be enabled by default on Linux systems only, also give
the oportunity to disable it from configure.
Remove the gate in the Makefile that only allows enabling blktap{1,2}
on Linux, since this is now done in a more flexible way on configure.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran autogen.sh ]
The manage-vtpmmgr.pl script is an example client for interacting with
the TPM Manager; it is intended to run in a management domain with a
vTPM (which may be dom0). It is used to create and manage vTPMs and
vTPM groups.
The calc.pl script is an example manager of a vTPM group. It signs
the configuration lists used by the TPM Manager with a locally held
private key.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This was a C interface to a very early version of the XenAPI, it has not kept
up with developments to the API e.g. in xapi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
I've retained xen.lowlevel.{xc,xs} since they seem more widely useful. I also
kept xen.lowlevel.xl even though it is disabled by default and IMHO useless in
its current form.
I've tried to clean up the various associated bits like example configs, init
scripts, udev rules etc but no doubt I have missed something, those can easily
be cleaned up later.
I've also removed xm-test since although it could in theory be reworked to
test xl it hasn't been touched for years. If someone wants to resurrect it
then they could do so via the git history.
This has been built but not runtime tested.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Clean out some .*ignore cruft
Remove some xm/xend docs.
Debian Jessie at least contains an ovmf package that includes
/usr/share/ovmf/OVMF.fd. It's also possible that user may want to supply
his/her own ovmf binary.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If this option is given don't bother building qemu-xen ourselves. Likely to be
handy for distros who have an existing qemu package which they want to reuse.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that we have upstream qemu people may want to avoid building this extra
code.
There is a little bit of trickery in stubdom/configure.ac to ensure that the
ioemu stubdom is only built if qemu-traditional is enabled.
libxl will return an error if a caller tries to build a domain using
qemu-xen-traditional when this support was disabled at build time. Since
qemu-xen-traditional has been historically tightly bound to the Xen releases I
don't see any value in supporting "3rd party" provision of
qemu-xen-traditional.
We also do not want/need this on ARM therefore default is on for x86 and off
otherwise.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- trivial conflicts in Tools.mk.in and tools/configure.ac.
Reran autogen.sh ]
I don't think there are any dom0's around whose kernels support only blktap1
and not something newer like blktap2 or qdisk. Certainly not that you would
want to run Xen 4.4 on.
libxl will never use blktap1.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We have defaulted to using the system libaio for a while now and I din't think
there are any relevant distros which don't have it that running Xen 4.4 would
be reasonable on.
Also it has caused confusion because it is not ever wanted on ARM, but the
build system doesn't express that (could be fixed, but deleting is the right
thing to do anyway).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend has been deprecated for 2 releases now. Lets make it possible to not even
build it.
For now I'm leaving the default of on but I would like to change that before
the 4.4 release.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
getconf is not cross-compile friendly since it reports the features of the host
and not the target. There doesn't appear to be a $triplet-getconf.
AC_SYS_LARGEFILE arranges for #defines to appear in config.h however Xen's
build system expects these to be part of C{PP}FLAGS. Since I'm not confident
that everything in Xen includes config.h I instead arrange for the result of
running AC_SYS_LARGERFILE to end up in CFLAGS.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch enables the compilation of the FLASK policy as part of the
tools build if the needed prerequisites are present.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Some OSes don't come with wget by default, so ftp should be choosen
on those. Add an autoconf check to check for wget and ftp, and
replace the usage of hardcoded wget in tools.
[ Stubdom builds still use wget unconditionally. -iwj ]
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
CentOS 5.x forked e2fs ext4 support into a different package called
e4fs, and so headers and library names changed from ext2fs to ext4fs.
Check if ext4fs/ext2fs.h and -lext4fs work, and use that instead of
ext2fs to build libfsimage. This patch assumes that if the ext4fs
library is present it should always be used instead of ext2fs.
This patch includes a rework of the ext2fs check, a new ext4fs check
and a minor modification in libfsimage to use the correct library.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This incorrectly removes the $(PYTHON) variable which is used at build
time as well as by the tools.
Remove and revisit for 4.3.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
LIB_PATH is no longer used, so the AX_DEFAULT_LIB macro is no longer
needed. Additionally lower case make variables are now used as
autoconf substitutions, which allows for more correct overrides at
build time.
I've checked the file layout in dist/install from the build made
before this change versus after with ./configure values of:
1) ./configure (no flags provided)
2) ./configure --libdir=/usr/lib/x86_64-linux-gnu (Debian style)
3) ./configure --libdir='${exec_prefix}/lib' (late variable expansion)
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc - reran autogen.sh ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Currently shared libraries are automatically installed into /usr/lib
or /usr/lib64, depending on the supplied --prefix value and
$(XEN_TARGET_ARCH). Some systems, like recent Debian and Ubuntu releases,
do not use /usr/lib64, but instead /usr/lib/x86_64-linux-gnu.
With this change, packagers can supply the desired location for shared
libraries on the ./configure command line. Packagers need to note that
the default behaviour on 64-bit Linux systems will be to install shared
libraries in /usr/lib, not /usr/lib64, unless a --libdir value is provided
to ./configure.
Additionally, the libfsimage plugins are now loaded explicitly from
$LIBDIR/fs, removing platform-based decision trees in code.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- resolve rejects in configure by rerunning autogen.sh. Dropped changes
to remove m4/default_lib.m4 and update m4/pkg.m4 since they cause LIBDIR=/lib
instead of /usr/lib. Reran ./autogen.sh after that too ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
We may need to #include <libutil.h>, and/or link with -lutil, to use
openpty, login_tty, and the like. Provide INCLUDE_LIBUTIL_H
(preprocessor constant, not always defined) and PTYFUNCS_LIBS
(makefile variable).
We link libxl against PTYFUNCS_LIBS (which comes from autoconf) rather
than UTIL_LIBS, and #include <libutil.h> where appropriate.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Changes since v7:
* Actually include the call to AX_CHECK_PTYFUNCS in this patch,
not the previous one, and regenerate configure accordingly.
Changes since v6:
* Put failure macro call in correct place so it might actually happen.
* Try both with -lutil and without.
* Patch now contains update for config.h.in.
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
It is not correct to say -lpthread. The correct option is -pthread,
which may have sundry other effects on code generation etc. It needs
to be passed both to compilation and linking.
Fix the configure test to test -pthread, and plumb the resulting flag
through to PTHREAD_{CFLAGS,LDFLAGS} in Tools.mk; also substitute
PTHREAD_LIBS (although this will currently always be empty).
Remove PTHREAD_LIBS setting from StdGNU.mk.
Fix the one user (libxc) to use PTHREAD_{CFLAGS,LDFLAGS} too.
There are still some other users in tree which pass -pthread or
-lpthread by adding it as a literal to their own compiler options.
These will be fixed in a later patch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Check for this tools, and set the proper paths on config/Tool.mk.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change disable/enable feature macros to have a more significative name
of what they actually do, to avoid confusions.
New macros have the following names:
AX_ARG_DEFAULT_ENABLE: feature is enabled by default, provides the
--disable-{feature} option to disable it.
AX_ARG_DEFAULT_DISABLE: feature is disabled by default, provides the
--enable-{feature] option to enable it.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Check for a curses compatible library (curses or ncurses basically).
One of those is needed to compile Xen tools (gtraceview and xentop).
Modify Makefiles/sources to use configure output (fetch CURSES_LIBS
from tools/Tools.mk and header to include from tools/config.h)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When adding autoconf support, the configuration options for XSM and
FLASK_ENABLE were incorrectly removed from Config.mk and added to the
tools configuration. Since these are hypervisor configuration options,
they should not depend on running tools configuration.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since the introduction of autoconf, builds with XSM enabled in .config
have been broken unless FLASK_ENABLE was explicitly set. Since the
setting in .config has apparently been deprecated in favor of an
autoconf --enable-xsm, add config/Xen.mk to export this to Xen. This
also makes --disable-debug and some paths to be pulled from the
configure process in the hypervisor build.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Olaf Hering
Yang Hongyang
Luis R. Rodriguez
Ian Jackson
Roger Pau Monne
Fabio Fantoni
Daniel De Graaf
Ian Campbell
Matthew Fioravante
Matt Wilson
Roger Pau Monne
Keir Fraser