If hardware support the 1GB pages, expose the feature to guest by
default. Users don't have to use a 'cpuid= ' option in config fil
e to turn it on.
If guest use shadow mode, the 1GB pages feature will be hidden from
guest, this is done in the function hvm_cpuid(). So the change is
okay for shadow mode case.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The presence of the partition reference time enlightenment persuades newer
versions of Windows to prefer the TSC as their primary time source. Hence,
if rdtsc is not being emulated and is invariant then many vmexits (for
alternative time sources such as the HPET or reference counter MSR) can
be avoided.
The implementation is not yet complete as no attempt is made to prevent
emulation of rdtsc if the enlightenment is active and guest and host
TSC frequencies differ. To do that requires invasive changes in the core
x86 time code and hence a lot more testing.
This patch avoids the issue by disabling the enlightenment if rdtsc is
being emulated, causing Windows to choose another time source. This is
safe, but may cause a big variation in performance of guests migrated
between hosts of differing TSC frequency. Thus the enlightenment is not
enabled in the default set, but may be enabled to improve guest performance
where such migrations are not a concern.
See section 15.4 of the Microsoft Hypervisor Top Level Functional
Specification v4.0a for details.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Christoph Egger <chegger@amazon.de>
Various configure scripts have the Xen version built into them by
autoconf. Rereun autogen.sh (on Debian wheezy) so that they all say
4.6. There are no changes other than to doc comments, usage messages,
and so forth.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Using SELinux mount options per default breaks several systems.
Either the context= mount option is not known at all to the kernel,
as reported for ArchLinux. Or the default value "none" is unknown to
SELinux, as reported for Fedora. In both cases the unit will fail.
The proper place to specify mount options is /etc/fstab. Apparently
systemd is kind enough to use values from there even if Options= or
What= is specified in a .mount file.
Remove XENSTORED_MOUNT_CTX, the reference to a non-existent
EnvironmentFile and trim default Options= for the mount point.
The removed code was first mentioned in the patch referenced below,
with the following description:
...
* Some systems define the selinux context in the systemd Option for
the /var/lib/xenstored tmpfs:
Options=mode=755,context="system_u:object_r:xenstored_var_lib_t:s0"
For the upstream version we remove that and let systems specify
the context on their system /etc/default/xenstored or
/etc/sysconfig/xenstored $XENSTORED_MOUNT_CTX variable
...
It is nowhere stated (on xen-devel) what "Some systems" means, which
is unfortunately common practice in nearly all opensource projects.
http://lists.xenproject.org/archives/html/xen-devel/2014-03/msg02462.html
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- Use %lex-param instead of obsolete YYLEX_PARAM to override lex scanner
parameter
- Change deprecated %name-prefix= to %name-prefix
Tested against bison 2.4.1 and 3.0.2.
This is expected to sometimes (depending on timestamps and whether the
bison input files are edited) break building on systems with ancient
versions of bison. Bison 2.4.1 is known to work and was released in
December 2008.
Also, consquentially, regenerate bison output files with bison
1:2.5.dfsg-2.1 from Debian wheezy.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Regenerate libxl_*_l.* with flex 2.5.35-10.1 as in current Debian
wheezy. The differences are trivial: addition of declarations of
xlu__cfg_yyget_column and xlu__cfg_yyset_column, but no code body
changes.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
On do_pci_remove when QEMU returns error, we just bail out early without
resetting the device. On domain shutdown we are racing with QEMU exiting
and most often QEMU closes the QMP connection before executing the
requested command.
In these cases if force=1, it makes sense to go ahead with rest of the
PCI device removal, that includes resetting the device and calling
xc_deassign_device. Otherwise we risk not resetting the device properly
on domain shutdown.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
It uses libxl_defbool_set and must therefore be linked against the
right library.
Spotted by dpkg-shlibdeps and pointed out by Bastian Blank:
dpkg-shlibdeps: warning: symbol libxl_defbool_set used by debian/libxen-4.4/usr/lib/libxlutil-4.4.so found in none of the libraries
This required switching the make rule from $^ to an explicit
LIBXLU_OBJS since the former now includes libxenlight.so.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Bastian Blank <waldi@debian.org>
libxl_dominfo contains a ssid_label pointer which will have memory allocated
for it in libxl_domain_info() if the hypervisor has CONFIG_XSM compiled.
However, the lack of appropriate use of libxl_dominfo_{init,dispose}() will
cause the label string to be leaked, even in success cases.
This was discovered by XenServers Coverity scanning, and are issues not
identified by upstream Coverity Scan.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
do_pci_remove contained this:
if (type == LIBXL_DOMAIN_TYPE_HVM) {
[stuff]
} else if (type != LIBXL_DOMAIN_TYPE_PV)
abort();
{
This is bizarre, and not correct. The effect is that HVM guests end
up running both the proper code and that intended for PV guests. This
causes (amongst other things) trouble when PCI devices are
hot-unplugged from HVM guests.
This bug was introduced in abfb006f "tools/libxl: explicitly grant
access to needed I/O-memory ranges".
This is clear candidate for Xen 4.5, being a bugfix to an important
feature.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Robert Hu <robert.hu@intel.com>
Rlease-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
CC: Sander Eikelenboom <linux@eikelenboom.it>
CC: George Dunlap <George.Dunlap@eu.citrix.com>
When excuting xl migrate/Remus, the following error can occur:
[root@master xen]# xl migrate 5 slaver
migration target: Ready to receive domain.
Saving to migration stream new xl format (info 0x1/0x0/1225)
Loading new save file <incoming migration stream> (new xl fmt info 0x1/0x0/12\
)
Savefile contains xl domain config in JSON format
Parsing config from <saved>
Segmentation fault (core dumped)
This is because CTX->xce is used without been initialized.
The bug was introduced by commit 2ffeb5d7f5
libxl: events: Deregister evtchn fd when not needed
which removed the initialization of xce from libxl__ctx_alloc.
In this patch we initialise the CTX->xce before using it. Also, we
adjust the doc comment for libxl__ev_evtchn_* to mention the need to
do so.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
If differences are found during the verification phase of xl migrate
--debug then it is likely to crash with a segfault because the bogus
pagebuf->pfn_types[pfn] is used in a print statement instead of
pfn_type[pfn] .
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
At the moment libxl unconditinally passes the underlying file format
to qemu in the device string. However, when tapdisk is in use,
tapdisk handles the underlying format and presents qemu with
effectively a raw disk. When qemu looks at the tapdisk block device
and doesn't find the image format it was looking for, it will fail.
This effectively means that tapdisk cannot be used with HVM domains at
the moment except for raw files.
Instead, if we're using a tapdisk backend, tell qemu to use a raw file
format.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- nuked extra blank line ]
In commit d36a3734a ("xl: fix migration failure with xl migrate
--debug"), message is printed to stderr for both debug mode
and dryrun mode. That caused rdname() in xendomains fails to parse
domain name since it's expecting input from xl's stdout.
So this patch separates those two cases. If xl is running in debug mode,
then message is printed to stderr; if xl is running in dryrun mode and
debug is not enabled, message is printed to stdout. This will fix
xendomains and other scripts that use "xl create --dryrun", as well as
not re-introducing the old bug fixed in d36a3734a.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The error handling from a failed memory allocation should return
PyErr_SetFromErrno(xc_error_obj); rather than simply calling it and continuing
to the memcpy() below, with the dest pointer being NULL.
Coverity also complains about passing a non-NUL terminated string to
xc_flask_context_to_sid(). xc_flask_context_to_sid() doesn't actually take a
NUL terminated string, but it does take a char* which, in context, used to be
a string, which is why Coverity complains.
One solution would be to use strdup(ctx) which is simpler than a
strlen()/malloc()/memcpy() combo, which would result in a NUL-terminated
string being used with xc_flask_context_to_sid().
However, ctx is strictly an input to the hypercall and is not mutated along
the way. Both these issues can be fixed, and the error logic simplified, by
not duplicating ctx in the first place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1055305 1055721
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
libxl_event_register_callbacks cannot reasonably be called while libxl
is busy (has outstanding operations and/or enabled events).
This is because the previous spec implied (although not entirely
clearly) that event hooks would not be called for existing fd and
timeout interests. There is thus no way to reliably ensure that libxl
would get told about fds and timeouts which it became interested in
beforehand.
So there have to be no such fds or timeouts, which means that the
callbacks must only be registered or changed when the ctx is idle.
Document this restriction, and enforce it with a pair of asserts.
(It would be nicer, perhaps, to say that the application may not call
libxl_osevent_register_hooks other than right after creating the ctx.
But there are existing callers, including libvirt, who do it later -
even after doing major operations such as domain creation.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We want to have no fd events registered when we are idle.
In this patch, deal with the evtchn fd:
* Defer setup of the evtchn handle to the first use.
* Defer registration of the evtchn fd; register as needed on use.
* When cancelling an evtchn wait, or when wait setup fails, check
whether there are now no evtchn waits and if so deregister the fd.
* On libxl teardown, the evtchn fd should therefore be unregistered.
assert that this is the case.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Do not bother putting evtchn_fd in the ctx; instead, get it
from xc_evtchn_fd when we need it. (Cosmetic.)
Do not register the evtchn fd multiple times: check it's not
registered before we call libxl__ev_fd_register. (Bugfix.)
We want to have no fd events registered when we are idle.
Also, we should put back the default SIGCHLD handler. So:
* In libxl_ctx_free, use libxl_childproc_setmode to set the mode to
the default, which is libxl_sigchld_owner_libxl (ie `libxl owns
SIGCHLD only when it has active children').
But of course there are no active children at libxl teardown so
this results in libxl__sigchld_notneeded: the ctx loses its
interest in SIGCHLD (unsetting the SIGCHLD handler if we were the
last ctx) and deregisters the per-ctx selfpipe fd.
* assert that this is the case: ie that we are no longer interested
in the selfpipe.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We want to have no fd events registered when we are idle. This
implies that we must be able to deregister our interest in the sigchld
self-pipe fd, not just modify to request no events.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We want to have no fd events registered when we are idle.
In this patch, deal with the xenstore watch fd:
* Track the total number of active watches.
* When deregistering a watch, or when watch registration fails, check
whether there are now no watches and if so deregister the fd.
* On libxl teardown, the watch fd should therefore be unregistered.
assert that this is the case.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
c/s d1b93ea causes substantial functional regressions in pygrub's ability to
parse bootloader configuration files.
c/s d1b93ea itself changed an an interface which previously used exclusively
integers, to using strings in the case of a grub configuration with explicit
default set, along with changing the code calling the interface to require a
string. The default value for "default" remained as an integer.
As a result, any Extlinux or Lilo configuration (which drives this interface
exclusively with integers), or Grub configuration which doesn't explicitly
declare a default will die with an AttributeError when attempting to call
"self.cf.default.isdigit()" where "default" is an integer.
Sadly, this AttributeError gets swallowed by the blanket ignore in the loop
which searches partitions for valid bootloader configurations, causing the
issue to be reported as "Unable to find partition containing kernel"
We should explicitly check type of "default" in image_index() and process it
appropriately.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_getdomaininfo, which is being used by xc_domain_getinfo(), has
strange interface: it reports first domain which has domid >= requested domid
so all callers are supposed to check that the proper domain(s) was queried
by checking domid. xc_get_tot_pages() doesn't do that. In case the requested
domain was destroyed it will report first domain with domid > requested domid
which is apparently misleading as there is no way xc_get_tot_pages() callers
can figure out that they got tot_pages for some other domain.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Don't leak a 16k allocation if PyArg_ParseTupleAndKeywords() or the first
xc_readconsolering() fail. It is trivial to run throught the processes memory
by repeatedly passing junk parameters to this function.
In the case that the call to xc_readconsolering() in the while loop fails,
reinstate str before breaking out, and passing a spurious pointer to free().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-IDs: 1054984 1055906
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Xen Coverity Team <coverity@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since commit 4542ae340d ("tools/hotplug:
systemd xenstored dependencies") all service files use the .socket unit
as startup dependency. While this happens to work for boot it fails for
shutdown because a .socket does not seem to enforce ordering. When
xendomains.service runs during shutdown then systemd will stop
xenstored.service at the same time.
Change all "xenstored.socket" to "xenstored.service" to let systemd know
that xenstored has to be shutdown after everything else.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Free strings returned by libxl_basename after used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- s/basename/kernel_basename in parse_config_data to avoid
shadowing basename(3). ]
libxl__domain_rename() unconditionally dereferences its new_name
parameter, to check whether it is an empty string. Add a check to
avoid a segfault if new_name is null.
Signed-off-by: Euan Harris <euan.harris@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Added to the xs_open() comments in xenstore.h. The text has been
taken almost verbatim from a xen-devel email by Ian Campbell,
and confirmed as accurate by Ian Jackson.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Migrations with xl migrate --debug will fail because debugging
information from the receiving process is written to the stdout
channel. This channel is also used for status messages so the
migration will fail as the sending process receives an unexpected
message. This patch moves the debugging information to the stderr
channel.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Before this patch, pv guest video_memkb is -1, which is an invalid value.
And it will cause the xenstore 'memory/targe' calculation wrong:
memory/target = info->target_memkb - info->video_memkb
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl__domain_rename only updates /local/domain/<domid>/name,
/vm/<uuid>/name in xenstore are not updated. Add code in
libxl__domain_rename to update /vm/<uuid>/name too.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove the unusual 'domain' field under backend directory. The
affected are backend/console, backend/vfb, backend/vkbd.
The correct way to obtain a domain's name is via
libxl_domid_to_name(), or by reading from /local/domain/$DOMID/name
for toolstacks not using libxl.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- added second paragraph to commit message ]
When parsing bitmap objects JSON parser will create libxl_bitmap map of the
smallest size needed.
This can cause problems when saved image file specifies CPU affinity. For
example, if 'vcpu_hard_affinity' in the saved image has only the first CPU
specified, just a single byte will be allocated and libxl_bitmap->size will be
set to 1.
This will result in assertion in libxl_set_vcpuaffinity()->libxl_bitmap_copy()
since the destination bitmap is created for maximum number of CPUs.
We could allocate that bitmap of the same size as the source, however, it is
later passed to xc_vcpu_setaffinity() which expects it to be sized to the max
number of CPUs
To fix this issue, introduce an internal function to allowing copying between
bitmaps of different sizes. Note that this function is only used in
libxl_set_vcpuaffinity at the moment. Though NUMA placement logic invoke
libxl_bitmap_copy as well there's no need to replace those invocations. NUMA
placement logic comes into effect when no vcpu / node pinning is provided, so
it always operates on bitmap of the same sizes (that is, size of maximum
number of cpus /nodes).
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Wei Liu
Andrew Cooper
Liang Li
Paul Durrant
Ian Jackson
Olaf Hering
Ed Swierk
Stefano Stabellini
Ian Campbell
Ian Jackson
M A Young
George Dunlap
Daniel De Graaf
Boris Ostrovsky
Vitaly Kuznetsov
Euan Harris
Chunyan Liu
Razvan Cojocaru
Zhigang Wang