In commit d36a3734a ("xl: fix migration failure with xl migrate
--debug"), message is printed to stderr for both debug mode
and dryrun mode. That caused rdname() in xendomains fails to parse
domain name since it's expecting input from xl's stdout.
So this patch separates those two cases. If xl is running in debug mode,
then message is printed to stderr; if xl is running in dryrun mode and
debug is not enabled, message is printed to stdout. This will fix
xendomains and other scripts that use "xl create --dryrun", as well as
not re-introducing the old bug fixed in d36a3734a.
Reported-by: Mark Pryor <tlviewer@yahoo.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: M A Young <m.a.young@durham.ac.uk>
Cc: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Free strings returned by libxl_basename after used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- s/basename/kernel_basename in parse_config_data to avoid
shadowing basename(3). ]
Migrations with xl migrate --debug will fail because debugging
information from the receiving process is written to the stdout
channel. This channel is also used for status messages so the
migration will fail as the sending process receives an unexpected
message. This patch moves the debugging information to the stderr
channel.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Return proper error codes on failure so that scripts can tell whether
the command completed properly or not.
This is not a proper fix, since it fails to call
libxl_device_disk_dispose() on the error path. But a proper fix
requires some refactoring, so given where we are in the release
process, it's better to have a fix that is simple and obvious, and do
the refactoring once the next development window opens up.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If you add enough PCI devices then all mmio may not fit below 4G
which may not be the layout the user wanted. This allows you to
increase the below 4G address space that PCI devices can use and
therefore in more cases not have any mmio that is above 4G.
There are real PCI cards that do not support mmio over 4G, so if you
want to emulate them precisely, you may also need to increase the
space below 4G for them. There are drivers for these cards that also
do not work if they have their mmio space mapped above 4G.
This allows growing the MMIO hole to the size needed.
This may help with using pci passthru and HVM.
In the tools this is named mmio_hole_memkb.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- fixed build error in xl_cmdimpl.c with s/%PRIu64/%ld/.
Reworded title ]
On a system which looks like this:
[root@st04 ~]# xl list
Name ID Mem VCPUs State Time(s)
Domain-0 0 752 4 r----- 46699.3
(null) 1 0 0 --p--- 0.0
(null) 2 0 0 --p--- 0.0
(null) 3 0 0 --p--- 0.0
badger 25 0 1 --p--- 0.0
`xl vcpu-list` failes as so:
[root@st04 ~]# xl vcpu-list
Name ID VCPU CPU State Time(s) CPU Affinity
Domain-0 0 0 0 -b- 12171.0 all
Domain-0 0 1 1 -b- 11779.6 all
Domain-0 0 2 2 -b- 11599.0 all
Domain-0 0 3 3 r-- 11007.0 all
libxl: critical: libxl__calloc: libxl: FATAL ERROR: memory allocation failure (libxl__calloc, 4294935299 x 40)
: Cannot allocate memory
libxl: FATAL ERROR: memory allocation failure (libxl__calloc, 4294935299 x 40)
The root cause of this is in Xen. getdomaininfo() has no way of expressing
"this domain has no vcpus". Previously, info->max_vcpu_id would be returned
uninitialised in such a case.
Unfortunately, setting it to 0 as a default is not appropriate. A max_vcpu_id
of 0 and nr_online_cpus of 0 is the valid state for a single vcpu domain which
is in the process of being destroyed.
As all components are required to add 1 to max_vcpu_id to get the number of
vcpus, an id of ~0U is not valid to be used. Explicitly define this as an
invalid max vcpu value, and use it to express "no vcpus" in getdomaininfo()
In libxl, the issue is seen as libxl_list_vcpu() attempts to use the
uninitialised domaininfo.max_vcpu_id for memory allocation.
Check domaininfo.max_vcpu_id against the new sentinel value
XEN_INVALID_MAX_VCPU_ID, and return early. This means that it is now valid
for libxl_list_vcpu() to return NULL for a domain which lacks any vcpus.
As part of this change, remove the pointless call to libxl_get_max_cpus(),
whose returned value is unconditionally clobbered in the for() loop.
Reported-by: Euan Harris <euan.harris@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
This adds support for channel declarations of the form:
channel = [ "name=...,connection=...[,path=...][,backend=...]" ]
where 'name' is a label to identify the channel to the frontend.
If 'connection = pty' then the channel is connected to a pty in the
backend domain
If 'connection = socket' then the channel is connected to a Unix domain
socket given by 'path = ...' in the backend domain.
This patch also adds the command:
xl channel-list <domain>
which allows the state of channels to be queried. In particular if
'connection=pty' this will show the path of the pty slave device.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduced some new xl commands to enable/disable Cache Monitoring
Technology(CMT) feature.
The following two commands is to attach/detach the CMT feature
to/from a certain domain.
$ xl psr-cmt-attach domid
$ xl psr-cmt-detach domid
This command is to display the CMT information, such as L3 cache
occupancy.
$ xl psr-cmt-show cache_occupancy <domid>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Disk replication is enabled by default. This patch adds a cmdline
switch to 'xl remus' command to explicitly disable disk replication.
A new boolean field 'diskbuf' is added to the libxl_domain_remus_info
structure to represent this configuration option inside libxl.
Note: Disabling disk replication requires enabling unsafe mode.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add two members in libxl_domain_remus_info:
netbuf: whether netbuf is enabled
netbufscript: the path of the script which will be run to setup
and tear down the guest's interface.
Add cmdline switches to 'xl remus' command to enable or disable
network buffering and a domain-specific hotplug script to setup
network buffering.
Add a new config var 'remus.default.netbufscript' to xl.conf, that
allows the user to override the default global script used to
setup network buffering.
Note: Network buffering is enabled by default. Disabling network
buffering requires enabling unsafe mode.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
By default, network buffering and disk replication are enabled;
checkpoints are replicated to another standby VM.
This patch allows the user to disable any of these features by
explicitly specifying a 'run in unsafe mode' switch when invoking
the 'xl remus' command. While running Remus in an unsafe mode
makes little sense under normal circumstances, it is useful to be
able to disable one or more features mentioned above for
testing/debugging/profiling purposes.
Unless this option is enabled, it will not be possible to
replicate memory checkpoints to /dev/null (blackhole replication),
disable network buffering or disk replication.
As a starter, the use of blackhole replication now requires that
the unsafe mode be enabled. Subsequent patches will add support
for disabling network buffering and disk replication in a similar
manner.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The following commits introduced the time reference counter MSR and
TSC/APIC frequency MSRs into the viridian feature set respectively:
e36cd2cdc984657efd91
The time reference counter MSR feature was then reverted by commit
1cd4fab14c
because a flaw in the implementation meant the counter was reset on
migration.
All of these changes were made without any addtional options being
added to the VM configuration, or any compatibility checks being made
in the domain save/restore code. Hence setting the single boolean
'viridian' option in the VM configuration yields a different set of
features depending on which version of Xen the VM is started on, and the
feature set can change across migration (so new MSRs can magically appear).
This patch grandfathers in the current viridian features set and calls them
the 'base' and 'freq' feature sets. HVM_PARAM_VIRIDIAN is re-purposed as
a feature mask. The hypervisor has only ever allowed it ot be set to 0
or 1, so the presence of the base and freq sets are indicated by setting
bit 0. The freq set can then be turned off by setting bit 1, thus
restoring the pre-Xen-4.4 base set. Newly implemented viridian features
can be optionally enabled in future by setting further bits.
The viridian option in xl.cfg(5) has also been changed to a list so
that the sets can be individually enabled or disabled. For compatibility,
if the option is specified as a boolean, then a true (1) value will enable
the base and freq sets and a false (0) value will not enable any
enlightenments.
This patch also alters the allowed write accesses to HVM_PARAM_VIRIDIAN.
Currently there is nothing to stop the guest writing this value (which,
while harmless to anything else, should not happen) and nothing to
stop a toolstack from setting the value back to zero whilst the guest is
running, causing CPUID leaves to disappear and MSR accesses to start
causing GPFs in the guest. Both of these possibilities are now disallowed:
Once the parameter is set to a non-zero value it may not be modified (only
re-written with the same value), and guests no longer have any write
access.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As we've already generated a JSON config for Dom0, print that out when
requested.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Before this change, xl stores domain configuration in "xl" format, which
is in fact a verbatim copy of user supplied domain config.
Now libxl provides a new API to retrieve domain configuration, switch to
that new API, store configuration in JSON format.
Tests done so far (xl.{new,old} denotes xl with{,out} "libxl-json"
support):
1. xl.new create then xl.new save, hexdump saved file: domain config
saved in JSON format
2. xl.new create, xl.new save then xl.old restore: failed on
mandatory flag check
3. xl.new create, xl.new save then xl.new restore: succeeded
4. xl.old create, xl.old save then xl.new restore: succeeded
5. xl.new create then local migrate, receiving end xl.new: succeeded
6. xl.old create then local migrate, receiving end xl.new: succeeded
Note that "xl" config is still supported and handled when restarting a
domain. "xl" config file takes precedence over "libxl-json" in that
case, so that user who uses "config-update" to store new config file
won't have regression. All other scenarios (migration, domain listing
etc.) now use the new API.
Lastly, print out warning when users invoke "config-update" to
discourage them from using this command.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As it needs to be, considering that we assign -1 to it (and
that, later, we check for it to be -1), to signify 'all vcpus'.
While at it, fix a coding style nit and improve error reporting.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently in xl.cfg, use 'root' and 'extra' to generate the command
line. 'cmdline' could be a more generic equivalent. So, add 'cmdline'
in xl.cfg and let it be preferred. 'root' and 'extra' still works.
But when 'cmdline' is specified, 'root' and 'extra' will be ignored.
[HVM config example]
[snip]
builder="hvm"
device_model_override="/home/cyliu/git/qemu/x86_64-softmmu/qemu-system-x86_64"
kernel="/mnt/vmlinuz-3.0.13-0.27-default"
ramdisk="/mnt/initrd-3.0.13-0.27-default"
root="/dev/hda2"
extra="console=tty0 console=ttyS0"
[snip]
or:
[snip]
builder="hvm"
device_model_override="/home/cyliu/git/qemu/x86_64-softmmu/qemu-system-x86_64"
kernel="/mnt/vmlinuz-3.0.13-0.27-default"
ramdisk="/mnt/initrd-3.0.13-0.27-default"
cmdline="root=/dev/hda2 console=tty0 console=ttyS0"
[snip]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xen side patch to support xen HVM direct kernel boot:
support 'kernel', 'ramdisk', 'cmdline' (and 'root', 'extra' as well
which would be deprecated later) in HVM config file, parse config file,
pass -kernel, -initrd, -append parameters to qemu.
It's working with qemu-xen when using the default BIOS (seabios).
[HVM config example]
name="sles11_sp2"
description="None"
uuid="5c84adcc-bd59-788a-96d2-195f9b599cfe"
memory=512
maxmem=512
vcpus=4
on_poweroff="destroy"
on_reboot="restart"
on_crash="destroy"
localtime=0
keymap="en-us"
builder="hvm"
device_model_override="/home/cyliu/git/qemu/x86_64-softmmu/qemu-system-x86_64"
kernel="/mnt/vmlinuz-3.0.13-0.27-default"
ramdisk="/mnt/initrd-3.0.13-0.27-default"
root="/dev/hda2"
extra="console=tty0 console=ttyS0"
disk=[ 'file:/mnt/images/sles11_sp2/disk0.raw,hda,w', ]
vif=[ 'mac=00:16:3e:56:af:69,bridge=br0,type=netfront', ]
stdvga=0
vnc=1
vncunused=1
viridian=0
acpi=1
pae=1
serial="pty"
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Allow the "serial" key to accept a list of serial ports, and pass
them in using the new serial_list domain build element.
For backwards compatibility, still accept singleton values.
Also update the xl.cfg manpage.
This patch borrows substantially from the multiple USB device patch
c3a2148192.
Signed-off-by: Ed White <edmund.h.white@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To do so, we add the vcpu_soft_affinity array to build_info, and
treat it much like vcpu_hard_affinity. The new config option is
called "cpus_soft".
Note that the vcpu_hard_affinity array, introduced in a previous
patch, and the vcpu_soft_affinity array, introduced here, share
the same LIBXL_HAVE_xxx macro, in libxl.h. That is called
LIBXL_HAVE_BUILDINFO_VCPU_AFFINITY_ARRAYS, and was introduced
together with vcpu_hard_affinity, but only inside a comment.
In this change, we uncomment, and hence properly define it.
In order to avoid having to issue separate calls to
libxl_set_vcpuaffinity() (one for hard affinity and one for soft
affinity) in libxl__build_pre(), in case the caller uses
b_info->cpumap (for the former) and b_info->vcpu_soft_affinity (for
the latter), we also set (again!) a new default for b_info->cpumap.
This allows, from this change on, to always and only deal with
b_info->vcpu_hard_affinity all around libxl internals.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
so that such parsing code can be used for both hard and soft
affinity, the support for which is introduced in the next
change.
This is pure code motion, no functional change intended.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
and start using the vcpu_hard_affinity array instead. This is done
as when, in a subsequent patch ("libxl/xl: make it possible to
specify soft-affinity in domain config file") we will become able
to deal with soft affinity, code can be shared.
This change also enables more advanced VCPU to PCPU (hard, for now)
affinity specification, in case a list is used, like:
cpus = ["3-4", "2-6,^4"]
What it means is that VCPU 0 must be pinned to PCPU 3,4 and VCPU 1
to PCPUs 2,3,5,6 (before this change, cpus=[xx, yy] only supported
single values). Of course, the old (e.g., cpus=[2, 3]) syntax
continues to work.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Getting happens via `xl vcpu-list', which now looks like this:
# xl vcpu-list -s
Name ID VCPU CPU State Time(s) Affinity (Hard / Soft)
Domain-0 0 0 11 -b- 5.4 8-15 / all
Domain-0 0 1 11 -b- 1.0 8-15 / all
Domain-0 0 14 13 -b- 1.4 8-15 / all
Domain-0 0 15 8 -b- 1.6 8-15 / all
vm-test 3 0 4 -b- 2.5 0-12 / 0-7
vm-test 3 1 0 -b- 3.2 0-12 / 0-7
Setting happens by specifying two pCPU masks to the `xl vcpu-pin'
command, the first one will be hard affinity, the second soft
affinity. If only one mask is specified, it is only hard affinity
that is affected. To change only soft affinity, '-' can be used
as the hard affinity mask parameter, and it will be left alone.
xl manual page is updated accordingly.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If domain is created through virsh, then in xl, one could see it
with 'xl list', but with 'xl list --long domU', it reports:
"Domain name must be specified."
The reason is xl config data does not exist but it still tries
to parse_config_data in current code.
Improve list_domain_details:
If len of config data is 0, just pass, do not go forward to
parse_config_data, otherwise, it will meet error like
"Domain name not specified" and exit. This error is not expected,
since if code enters list_domain_details, domain name validness
is already checked and domain does exist.
Length of config data is 0 may means: config data does not exist due
to some reason, like: domain is created by libvirt, or in destroying
domain process config data is cleared but domain fails to clean up.
No matter in which case, list_domain_details could just show empty
info, but not error like "Domain name not specified".
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the "generation_id" option is set in the domain configuration,
generate and set a new random VM generation ID every time a domain is
created or restored.
xl lacks the infrastructure to fully track the lifecycle of VM images
as they are snapshotted and cloned (etc) so always using a new ID is
the safe option and ensures that a new one will be used where it matters.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch introduces an array of libxl_bitmap called "vcpu_hard_affinity"
in libxl IDL to preserve VCPU to PCPU mapping. This is necessary for libxl
to preserve all information to construct a domain.
The array accommodates at most max_vcpus elements, each containing the
affinity of the respective VCPU. If less than max_vcpus bitmaps are
present, the VCPUs associated to the missing elements will just stay with
their default affinity (they'll be free to execute on every PCPU).
In case both this new field, and the already existing cpumap field are
used, the content of the array will override what's set in cpumap. (In
xl, we make sure that this never happens in xl, by using only one of the
two at any given time.)
The proper macro to mark the API change (called
LIBXL_HAVE_BUILDINFO_VCPU_AFFINITY_ARRAYS) is added but it is commented.
It will be uncommented by the patch in the series that completes the
process, by adding the "vcpu_soft_affinity" array. This is because, after
all, these two fields are being added sort-of together, and are very
very similar, in both meaning and usage, so it makes sense for them to
share the same marker.
This patch was originally part of Wei's series about pushing as much
information as possible on domain configuration in libxl, rather than
xl. See here, for more details:
http://lists.xen.org/archives/html/xen-devel/2014-06/msg01026.htmlhttp://lists.xen.org/archives/html/xen-devel/2014-06/msg01031.html
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make space a new cpumap in vcpu_info, called cpumap_soft,
for retrieving soft affinity, and amend the relevant API
accordingly.
libxl_set_vcpuaffinity() now takes two cpumaps, one for hard
and one for soft affinity (LIBXL_API_VERSION is exploited to
retain source level backword compatibility). Either of the
two cpumap can be NULL, in which case, only the affinity
corresponding to the non-NULL cpumap will be affected.
Getting soft affinity happens indirectly (see, e.g.,
`xl vcpu-list'), as it is already for hard affinity).
This commit also introduces some logic to check whether the
affinity which will be used by Xen to schedule the vCPU(s)
does actually match with the cpumaps provided. In fact, we
want to allow every possible combination of hard and soft
affinity to be set, but we warn the user upon particularly
weird situations (e.g., hard and soft being disjoint sets
of pCPUs).
This very change also update the error handling for calls
to libxl_set_vcpuaffinity() in xl, as that can now be any
libxl error code, not just only -1.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch pushes parsing of "init_seclabel", "seclabel",
"device_model_stubdomain_seclabel" and "pool" down to libxl level.
Originally the parsing is done in xl level, which is not ideal because
libxl won't have the truely relevant information. With this patch libxl
holds important information by itself.
The libxl IDL is extended to hold the string of labels and pool name.
And if there those strings are present they take precedence over the
numeric representations.
As all relevant structures (libxl_dominfo etc) have a field called
X_name / X_label now, a string is also copied there so that callers
won't have to do ID to name / label translation.
In order to be compatible with users of older versions of libxl, this
patch also defines LIBXL_HAVE_SSID_LABEL and LIBXL_HAVE_CPUPOOL_NAME. If
they are defined, the respective strings are available. And if those
strings are not NULL, libxl will do the parsing and ignore the numeric
values.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Print out a warning and suggest user use "-V" option when invoking "xl
create". Also remove that option in manpage. This will introduce a
minor functional regression but it's very easy to work around.
The rationale behind this change is that, this option is actually not
part of domain configuration. It just affects whether a vncviewer
should be automatically spawn, but has nothing to do with how a domain
should be constructed. And this option is also bogus, considering if you
migrate a domain to a remote host and the receiver spawns a vncviewer on
the receiving side then it either dies silently or occupies resource.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When dom0 is not the hardware domain, it can be destroyed in the same
way as any other service domain. To avoid accidental use when a domain
is not resolved, destroying domain 0 requires passing -f to xl destroy.
Since the hypervisor already prevents a domain from destroying itself,
this patch is only useful in a disaggregated environment.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
do_daemonize had open-coded handling of the results from xl_waitpid.
Instead, break out the meat of console_child_report into a new
function child_report (which returns an error code), and use it.
No functional change other than a change to the message printed if
forking the daemonic child fails.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
vncviewer_child_report was very similar to console_child_report.
We can abolish vncviewer_child_report by adding an xlchildnum
parameter to console_child_report.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
We record the descriptive string for the child in the children[]
array, and use it when reporting the exit status.
The only functional change is that the message reported for the
migration child is changed from "migration target process" to
"migration transport process".
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Compute a -v option to pass to the migration receiver.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
---
v2: Use minmsglevel_default to initialise minmsglevel.
If we ourselves are using cr-based overwriting for logging to stderr,
pass -t to the migration receiver so that it knows to do the same
(since its stderr is normally the pipe from sshd).
This requires, of course, that the receiver support that option. This
is OK from a compatibility point of view because we support migration
to newer, but not necessarily to older, versions. (If unsupported
backwards migration is still desired the use of -s "" allows the
remote invocation rune to be overridden by a command of one's choice.)
This fixes a regression introduced in 2f80ac9c0e, where migration
messages from the receiver would not use of the overwriting protocol.
CC: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Wei Liu
M A Young
George Dunlap
Don Slutz
Andrew Cooper
David Scott
Chao Peng
Roger Pau Monne
Yang Hongyang
Paul Durrant
Meng Xu
Dario Faggioli
Arianna Avanzini
Chunyan Liu
White, Edmund H
David Vrabel
Olaf Hering
Daniel De Graaf
Ian Jackson
Fabio Fantoni