Now that XEN_DOMCTL_createdomain handles the grant table limits, remove
XEN_DOMCTL_set_gnttab_limits (including XSM hooks and libxc wrappers).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
XEN_DOMCTL_set_gnttab_limits is a fairly new hypercall, and is strictly
mandatory. As it pertains to domain limits, it should be provided at
createdomain time.
In preparation to remove the hypercall, extend xen_domctl_createdomain with
the fields and arrange for all callers to pass appropriate details. There is
no change in construction behaviour yet, but later patches will rearrange the
hypervisor internals, then delete the hypercall.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The structure already has explicitly padding.
Removing the attribute silences a clang 6 warning:
tcgbios.c:1519:34: error: taking address of packed member 'u' of class or structure 'pushad_regs_t' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member]
®s->u.r32.edx);
^~~~~~~~~~~~~~~
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Versions of linux privcmd prior to commit dc9eab6fd94d ("return -ENOTTY
for unimplemented IOCTLs") will return -EINVAL rather than the conventional
-ENOTTY for unimplemented codes. This breaks the error path in
libxenforeignmemory resource mapping, which only translates ENOTTY into
EOPNOTSUPP to inform callers of the need to use an alternative (legacy)
mechanism.
This patch adds a new 'unimplemented' [1] ioctl code into the local
privcmd header which is then used to probe for the appropriate errno to
translate in the resource mapping error path
[1] this is a code that has, so far, never been used in any version of
privcmd and will be added to future versions of the header in the
linux source, to make sure it stays unimplemented.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move a few constants defined by libxl_arm.c to
xen/include/public/device_tree_defs.h, so that they can be used from Xen
and libxl. Prepend GUEST_ to avoid conflicts.
Move the DT_IRQ_TYPE* definitions from libxl_arm.c to
public/device_tree_defs.h. Use them in Xen where appropriate.
Re-define the existing Xen internal IRQ_TYPEs as DT_IRQ_TYPEs: they
already happen to be the same, let make it clear.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
CC: ian.jackson@eu.citrix.com
This allows to parse a string that is not NUL-terminated. With that
option disabled, YAJL v2 would look ahead on completion to find out if
there is more to parse.
YAJL v1 doesn't have this behavior.
Any function that allocates a yajl_handle via this function either parse
a NUL-terminated string, or do provide proper length. So change the
default and allow garbage (like a different JSON document) after the end
of the data to parse.
This is important for the QMP client, as there could be more than one
message to parse, and YAJL would consider the next message to be garbage
and throw an error.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There is going to be a few more users that want to use UNIX socket, this
helper is to prepare the `struct sockaddr_un` and check that the path
isn't too long.
Also start to use it in libxl_qmp.c.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This variable is only used once, no need to keep it in the handler.
Also fix coding style (remove space after sizeof).
And allow strncpy to use all the space in sun_path.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Fixing top-level "make uninstall":
tools/tests/x86_emulator is missing an uninstall target, which causes
failure. Trivial to add one since it installs nothing, so do that.
Linux hotplug uninstall returns success but doesn't actually remove what
it installed. The Makefile variables are obfuscating incorrect logic, so
strip them out and match existing code for xen-watchdog which does work.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add support for Linux grant device driver extension which allows
converting existing dma-buf's into an array of grant references
and vise versa. This is only implemented for Linux as other OSes
have no Linux dma-buf support.
Bump gnttab library minor version to 3.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The ret variable can be used uninitialised when iters is 0. Initialise
ret at the beginning to fix this issue.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
32 bit gcc 8.1 non-debug build yields:
xenpmd.c:354:23: error: '%02x' directive output may be truncated writing between 2 and 8 bytes into a region of size 3 [-Werror=format-truncation=]
snprintf(val, 3, "%02x",
^~~~
xenpmd.c:354:22: note: directive argument in the range [40, 2147483778]
snprintf(val, 3, "%02x",
^~~~~~
xenpmd.c:354:5: note: 'snprintf' output between 3 and 9 bytes into a destination of size 3
snprintf(val, 3, "%02x",
^~~~~~~~~~~~~~~~~~~~~~~~
(unsigned int)(9*4 +
~~~~~~~~~~~~~~~~~~~~
strlen(info->model_number) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->serial_number) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->battery_type) +
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strlen(info->oem_info) + 4));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All info->* used in calculation are 32 bytes long, and the parsing
code makes sure they are null-terminated, so the end result of the
expression won't exceed 255, which should be able to be fit into 3
bytes in hexadecimal format.
Add an assertion to make gcc happy.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This placates gcc 8.1. The commit comes from ipxe master branch as of
July 25, 2018.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add zero-padding to #defined ACPI table strings that are copied.
Provides sufficient characters to satisfy the length required to
fully populate the destination and prevent array-bounds warnings.
Add BUILD_BUG_ON sizeof checks for compile-time length checking.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit "tools: Rework xc_domain_create() to take a full
xen_domctl_createdomain" failed to replace one further instance of
xc_config in libxl__arch_domain_save_config().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In future patches, the structure will be extended with further information,
and this is far cleaner than adding extra parameters.
The python stubs are the only user which passes NULL for the existing config
option (which is actually the arch substructure). Therefore, the #ifdefary
moves to compensate.
For libxl, pass the full config object down into
libxl__arch_domain_{prepare,save}_config(), as there are in practice arch
specific settings in the common part of the structure (flags s3_integrity and
oos_off specifically).
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The underlying C function is about to make the same change, and the structure
is going to gain extra fields.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Resource mapping is not supported on Arm and results to an error message
at every guest boot:
xenforeignmemory: error: ioctl failed: Operation not supported
Hide the error message when errnor is ENOTSUPP.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
PV 9pfs requires the PV backend in QEMU. Make sure that libxl knows it.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XSA-273 involves one hyperthread being able to use Spectre-like
techniques to "spy" on another thread. The details are somewhat
complicated, but the upshot is that after all Xen-based mitigations
have been applied:
* PV guests cannot spy on sibling threads
* HVM guests can spy on sibling threads
(NB that for purposes of this vulnerability, PVH and HVM guests are
identical. Whenever this comment refers to 'HVM', this includes PVH.)
There are many possible mitigations to this, including disabling
hyperthreading entirely. But another solution would be:
* Specify some cores as PV-only, others as PV or HVM
* Allow HVM guests to only run on thread 0 of the "HVM-or-PV" cores
* Allow PV guests to run on the above cores, as well as any thread of the PV-only cores.
For example, suppose you had 16 threads across 8 cores (0-7). You
could specify 0-3 as PV-only, and 4-7 as HVM-or-PV. Then you'd set
the affinity of the HVM guests as follows (binary representation):
0000000010101010
And the affinity of the PV guests as follows:
1111111110101010
In order to make this easy, this patches introduces three "global affinity
masks", placed in xl.conf:
vm.cpumask
vm.hvm.cpumask
vm.pv.cpumask
These are parsed just like the 'cpus' and 'cpus_soft' options in the
per-domain xl configuration files. The resulting mask is AND-ed with
whatever mask results at the end of the xl configuration file.
`vm.cpumask` would be applied to all guest types, `vm.hvm.cpumask`
would be applied to HVM and PVH guest types, and `vm.pv.cpumask`
would be applied to PV guest types.
The idea would be that to implement the above mask across all your
VMs, you'd simply add the following two lines to the configuration
file:
vm.hvm.cpumask=8,10,12,14
vm.pv.cpumask=0-8,10,12,14
See xl.conf manpage for details.
This is part of XSA-273 / CVE-2018-3646.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
In Store.path_write(), Path.apply_modify() updates the node_created
reference and both the value of apply_modify() and node_created are
returned by path_write().
At least with OCaml 4.06.1 this leads to the value of node_created being
returned *before* it is updated by apply_modify(). This in turn leads
to the quota for a domain not being updated in Store.write(). Hence, a
guest can create an unlimited number of entries in xenstore.
The fix is to make evaluation order explicit.
This is XSA-272.
Signed-off-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Rob Hoes <rob.hoes@citrix.com>
A previous patch added support for priv-mapping guest resources directly
(rather than having to foreign-map, which requires P2M modification for
HVM guests).
This patch makes use of the new API to seed the guest grant table unless
the underlying infrastructure (i.e. privcmd) doesn't support it, in which
case the old scheme is used.
NOTE: The call to xc_dom_gnttab_hvm_seed() in hvm_build_set_params() was
actually unnecessary, as the grant table has already been seeded
by a prior call to xc_dom_gnttab_init() made by libxl__build_dom().
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Select MEM_ACCESS_ALWAYS_ON on x86 to mark that MEM_ACCESS is not
configurable on x86. Avoid selecting it on ARM.
Rename HAS_MEM_ACCESS to MEM_ACCESS everywhere. Add a prompt and a
description to MEM_ACCESS in xen/common/Kconfig.
The result is that the user-visible option is MEM_ACCESS, and it is
configurable only on ARM (disabled by default). At the moment the
arch-specific mem_access code remains enabled on ARM, even with
MEM_ACCESS=y.
The purpose is to reduce code size. The option doesn't depend on EXPERT
because it would be nice to ecurity-support configurations without
MEM_ACCESS and a non-expert should be able to disable it.
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
CC: dgdegra@tycho.nsa.gov
CC: andrew.cooper3@citrix.com
CC: George.Dunlap@eu.citrix.com
CC: ian.jackson@eu.citrix.com
CC: jbeulich@suse.com
CC: julien.grall@arm.com
CC: konrad.wilk@oracle.com
CC: sstabellini@kernel.org
CC: tim@xen.org
CC: wei.liu2@citrix.com
---
Changes in v5:
- change MEM_ACCESS_ALWAYS_ON to bool
- change default for MEM_ACCESS, default y if MEM_ACCESS_ALWAYS_ON
Changes in v4:
- remove HAS_MEM_ACCESS
- move MEM_ACCESS_ALWAYS_ON to common
- combile default and bool to def_bool
Changes in v3:
- keep HAS_MEM_ACCESS to mark that an arch can do MEM_ACCESS
- introduce MEM_ACCESS_ALWAYS_ON
- the main MEM_ACCESS option is in xen/common/Kconfig
Changes in v2:
- patch added
gdb 8.0 fixed bounds checking for 'g' packet (commit
9dc193c3be85aafa60ceff57d3b0430af607b4ce "Check for truncated
registers in process_g_packet"). This revealed that gdbsx did
not properly formatted 'g' packet - segment registers and eflags are
expected to be 32-bit fields in the response (according to
gdb/features/i386/64bit-core.xml in gdb sources). Specific error is:
Truncated register 26 in remote 'g' packet
instead of silently truncating part of register.
Additionally, it looks like segment registers of 64bit guests were never
reported correctly, because of type mismatch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Parsing/generating the escape sequences used by xenstore-client is non
trivial. So make scripting (for use in stubdom) easier by adding a raw
option.
[added man page entries, facor out expand_buffer]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add --replace-escape option to xenconsoled, which replaces ESC with
'.' in console output written to log file. This makes it slightly safer
to do tail -f on a console output of untrusted guest.
The pty output is unaffected by this option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: move variables into a narrower scope ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
In qmp_next(), the inner loop should only try to parse messages from
QMP, if there is more than one.
The handling of the receive buffer ('incomplete'), should be done at the
same scope level as read(). It doesn't need to be handle more that once
after a read.
Before this patch, when on message what handled, the inner loop would
restart by adding the 'buffer' into 'incomplete' (after reallocation).
Since 'rd' was not reset, the buffer would be strcat a second time.
After that, the stream from the QMP server would have syntax error, and
the parsor would throw errors.
This is unlikely to happen as the receive buffer is very large. And
receiving two messages in a row is unlikely. In the current case, this
could be an event and a response to a command.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also replace LIBXL__LOG_DEBUG by XTL_DEBUG, because it's shorter and
more often used in libxl.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch fix complilation error with #define DEBUG_RECEIVED of the
macro DEBUG_REPORT_RECEIVED.
error: field precision specifier ‘.*’ expects argument of type ‘int’, but argument 9 has type ‘ssize_t {aka long int}’
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Today when setting up a minimal domain configuration file for dom0 and
eventually xenstore-domain the domain type is harcoded as PV. Change
that by asking the hypervisor for the correct type.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Andrew Cooper