Now that XEN_DOMCTL_createdomain handles the grant table limits, remove
XEN_DOMCTL_set_gnttab_limits (including XSM hooks and libxc wrappers).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
XEN_DOMCTL_set_gnttab_limits is a fairly new hypercall, and is strictly
mandatory. As it pertains to domain limits, it should be provided at
createdomain time.
In preparation to remove the hypercall, extend xen_domctl_createdomain with
the fields and arrange for all callers to pass appropriate details. There is
no change in construction behaviour yet, but later patches will rearrange the
hypervisor internals, then delete the hypercall.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
In future patches, the structure will be extended with further information,
and this is far cleaner than adding extra parameters.
The python stubs are the only user which passes NULL for the existing config
option (which is actually the arch substructure). Therefore, the #ifdefary
moves to compensate.
For libxl, pass the full config object down into
libxl__arch_domain_{prepare,save}_config(), as there are in practice arch
specific settings in the common part of the structure (flags s3_integrity and
oos_off specifically).
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Today when setting up a minimal domain configuration file for dom0 and
eventually xenstore-domain the domain type is harcoded as PV. Change
that by asking the hypervisor for the correct type.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When creating a Xenstore stubdom set the grant limits: the stubdom
will need to setup a very limited amount of grants only, so 4 grant
frames are enough. For being able to support up to 32768 domains it
will need 128 maptrack frames (1 mapping per domain, 256 maptrack
entries per maptrack frame).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a parameter to specify the maximum memory size of the xenstore
domain. In case the xenstore domain supports ballooning it will be
capable to adjust its own size according to its memory needs.
The maximum memory size can be specified as an absolute value in
MiB, as a fraction of the host's memory, or as a combination of
both (the maximum of the absolute and the fraction value):
--maxmem <m> maxmem is <m> MiB
--maxmem <a>/<b> maxmem is hostmem * a / b
--maxmem <m>:<a>/<b> maxmem is max(<m> MiB, hostmem * a / b)
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Place the PID file under XEN_RUN_DIR. Note that this change the default
location from /var/run to /var/run/xen.
Generate a _paths.h as that is required to make this change work.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously xs_fd would be left open, which is CID 1055993 (previously
partially fixed by 3bca826aae).
Instead arrange for both success and error cases to cleanup everything
on a single exit path instead of doing partial cleanup on the success
path a few operations higher up.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
After starting the xenstore domain write the basic data (domid, name
and memory values) to the xenstore. This makes the domain appear
correctly in xl list. Create a stub json object in order to make e.g.
xl list -l happy.
Add a new option to init-xenstore-domain to be able to specify the
domain's name.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Split up tools/helpers/xen-init-dom0.c in order to prepare reusing
generation of the json configuration by init-xenstore-domain.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add a parameter to init-xenstore-domain for support of arbitrary
parameters for the xenstore domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Create the xenstore domain with the xenstore flag specified. This
enables us to test whether such a domain is already running before
we create it. As there ought to be only one xenstore in the system
we don't need to start another one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
init-xenstore-domain takes only positional parameters today. Change
this to a more flexible parameter syntax allowing to specify additional
options or to omit some.
Today the supported usage is:
init-xenstore-domain <xenstore-kernel> <memory_mb> <flask-label>
[<ramdisk-file>]
Modify this to:
init-xenstore-domain --kernel <xenstore-kernel>
--memory <memory_mb>
[--flask <flask-label>]
[--ramdisk <ramdisk-file>]
The flask label is made optional in order to support xenstore domains
without the need of a flask enabled hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When creating a xenstore domain via init-xenstore-domain destroy it
in case of an error occurred after calling xc_domain_create().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move xen-init-dom0 from tools/libxl to tools/helpers, as it is just a
helper program.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Adjust the coding style of init-xenstore-domain.c to the general Xen
coding style.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The program init-xenstore-domain to start a xenstore domain instead
of the xenstored daemon is built, but not installed. Change that.
Move the program to a new tools subdirectory "helpers" to be able to
use libxl in a later patch. Otherwise a dependency loop will be
created.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Andrew Cooper
Juergen Gross
Jonathan Ludlam
Ian Jackson
Petre Pircalabu
Jan Beulich
Wei Liu
Ian Campbell