Versions of linux privcmd prior to commit dc9eab6fd94d ("return -ENOTTY
for unimplemented IOCTLs") will return -EINVAL rather than the conventional
-ENOTTY for unimplemented codes. This breaks the error path in
libxenforeignmemory resource mapping, which only translates ENOTTY into
EOPNOTSUPP to inform callers of the need to use an alternative (legacy)
mechanism.
This patch adds a new 'unimplemented' [1] ioctl code into the local
privcmd header which is then used to probe for the appropriate errno to
translate in the resource mapping error path
[1] this is a code that has, so far, never been used in any version of
privcmd and will be added to future versions of the header in the
linux source, to make sure it stays unimplemented.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add support for Linux grant device driver extension which allows
converting existing dma-buf's into an array of grant references
and vise versa. This is only implemented for Linux as other OSes
have no Linux dma-buf support.
Bump gnttab library minor version to 3.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Both Xen and the toolstack have need of the same logic when it comes to
manipulation and checking of the CPUID and MSR values offered to guests. To
that end, libx86 is being introduced to allow Xen and the toolstack to share a
single implementation, rather than duplicating the logic.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Begin to untangle the header dependency tangle by moving definition of
struct cpuid_leaf out of x86_emulate.h into the new cpuid.h.
Additionally, plumb the header through to libxc. This is technically a
redundant include at this point, but it helps build-test the later changes,
and will be used eventually.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In the x86 test harness and the fuzzer, and instead create a link in
the tools/include directory that can be used by all the tools.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
xen-tools/libs.h currently contains a shared BUILD_BUG_ON() implementation and
is used by some tools. Extend this to include ARRAY_SIZE and clean up all the
opencoding.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the ioctl
number, because the generic ioctl handler in the OS takes care of
copying the data from user-space to kernel space, and then calls the
device specific ioctl handler. Thus using ioctl structs with variable
sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Implement support for restricting evtchn handles to a particular domain
on Linux by calling the IOCTL_EVTCHN_RESTRICT_DOMID ioctl (support added
in Linux v4.8).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Build can fail if stubdom build is run before tools build because:
1. tools/include build uses relative path and depends on XEN_OS
2. stubdom needs tools/include to be built, at which time XEN_OS is
mini-os and corresponding symlinks are created
3. libraries inside tools needs tools/include to be built, at which
time XEN_OS is the host os name, but symlinks won't be created
because they are already there
4. libraries get the wrong headers and fail to build
Since both tools and stubdom build need the public headers, we build
tools/include before stubdom and tools. Remove runes in stubdom and
tools to avoid building tools/include more than once.
Provide a new dist target for tools/include. Hook up the install,
clean, dist and distclean targets for tools/include.
The new arrangement ensures tools build gets the correct headers
because XEN_OS is set to host os when building tools/include. As for
stubdom, it explicitly links to the mini-os directory without relying
on XEN_OS so it should be fine.
Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This patch adds the headers and helpers for the FreeBSD gntdev, used in order
to map grants from remote domains and to allocate grants on behalf of the
current domain.
Current code has been tested with the QEMU/Qdisk backend.
Signed-off-by: Akshay Jaggi <akshay1994.leo@gmail.com>
[ added dummy stub for osdep_gnttab_grant_copy ]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Move PAGE_* back to {linux,freebsd}.c due to breakage in stubdom build.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Eliminate the mis-naming of 64-bit fields with 32-bit register names
(eflags instead of rflags etc). To ensure no piece of code was missed,
transiently use the underscore prefixed names only for 32-bit register
accesses. This will be cleaned up subsequently.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The link to acpi include directory is not removed by Makefile's 'clean'
target. This can lead to make failure when making xen/.dir target if
we try to create the link again.
We can prevent this failure by (1) removing acpi link when cleaning up
and (2) adding '-f' option to 'ln' (just like we do for other targets).
We should also add tools/include/acpi link to .gitignore.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Do not include ../../xen/include/ to build libxl_arm_acpi.c: header
files clashing against default headers under /usr/include are present in
that directory.
Link only $(XEN_ROOT)/xen/include/acpi under tools/include instead.
Build tested on ARM64 and x86_64.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
3a7f872a ("tools: lift BUILD_BUG_ON to a tools header file") was taken
out from an rather old half finished branch by dropping unrelated
changes. Unfortunately two issues sneaked in.
1. Hvmloader should be standalone. Revert the changes to hvmloader.
2. The define guard in libs.h was erroneously deleted. Add that back.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In a linux part an ioctl(gntdev, IOCTL_GNTDEV_GRANT_COPY, ..)
system call is invoked. In mini-os the operation is yet not
implemented. For the OSs that does not implement gnttab the
call of the grant copy operation causes abort.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: modify this patch to use BUILD_BUG_ON in xen-tools/libs.h ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Only define BUILD_BUG_ON when there isn't one already, because mini-os
currently leaks that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The current seedery doesn't work with BSD sed, so remove the try to match
int64_t also (since there's none at the moment). Also, apply the same
treatment to all arch headers, currently this is only done to x86_64
headers.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Due to the fact that on ARM headers types are substituted to uint64_t and
then uint64_t is also substituted to contain the aligment, this would lead
to some types containing two __align8__ directives. Fix this by first
expanding Xen specific types to uint64_t only, and then replacing all the
uint64_t types to __align8__ uint64_t. This relies on the fact that all
Xen-specific types will have longer names, so they will always be replaced
first.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The foreign header generation blindly replaces 'uint64_t' with '__align8__
uint64_t', to get correct alignment when built as 32bit. This is correct in
most circumstances, but Clang objects to two specific uses.
* Inside a sizeof() expression
* As part of a typecast
An example error looks like:
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:204:44:
error: 'aligned' attribute ignored when parsing type [-Werror,-Wignored-attributes]
__align8__ uint64_t evtchn_mask[sizeof(__align8__ uint64_t) * 8];
^~~~~~~~~~
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:13:36:
note: expanded from macro '__align8__'
^~~~~~~~~~~
This sedary is sufficient to fix all the bad examples without touching any of
the legitimate uses, and is more simple than teaching mkheader.py how to parse
C.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xen's build system has a target for rump kernel called NetBSDRump. We
want to build libxc against rump kernel, so we need to copy NetBSD's
evtchn.h and privcmd.h to NetBSDRump. These copies is not very likely to
diverge from NetBSD's copies, but we don't preclude such possibility.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
By generating tools/include/xen-xsm/flask/flask.h using the same tool
as used during the hypervisor build.
Note that this is done regardless of whether XSM is enabled, since we
want the tools to be agnostic to whether or not XSM is enabled in the
hypervisor
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Linux is in the process of converting their seconds representation to
64 bits, so in order to support it consistently we should follow suit
(which at some point in quite a few years we'd have to do anyway). To
represent this in struct shared_info we leverage a 32-bit hole in
x86-64's and arm's variant of the structure; for x86-32 guests the only
(reasonable) choice we have is to put the extension in struct
arch_shared_info.
A note on the conditional suppressing the xen_wc_sec_hi helper macro
definition in the ix86 case for hypervisor and tools: Neither of the
two actually need this, and its presence causes the tools to fail to
build (due to the inclusion of both the x86-64 and x86-32 variants of
the header).
As a secondary change, x86's do_platform_op() gets a pointless
initializer as well as a pointless assignment of that same variable
dropped.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The x86 struct arch_shared_info field pfn_to_mfn_frame_list_list
currently contains the mfn of the top level page frame of the 3 level
p2m tree, which is used by the Xen tools during saving and restoring
(and live migration) of pv domains and for crash dump analysis. With
three levels of the p2m tree it is possible to support up to 512 GB of
RAM for a 64 bit pv domain.
A 32 bit pv domain can support more, as each memory page can hold 1024
instead of 512 entries, leading to a limit of 4 TB.
To be able to support more RAM on x86-64 switch to an additional
virtual mapped p2m list.
This patch expands struct arch_shared_info with a new p2m list virtual
address, the root of the page table root and a p2m generation count.
The new information is indicated by the domain to be valid by storing
a non-zero value into the page table root member.
To avoid build failures in the tools directory the checked structure
sizes must be adapted, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Some headers for ARM are not installed on the host. This may make external
software relying on Xen headers failed to compile on ARM.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Storing it in a 32-bit variable in struct arch_vcpu caused breakage over
context switch.
There were also several other places which stored this as the 32-bit value.
Update them all.
The "struct vcpu_guest_context" case needs special consideration. This struct
is in theory is exposed to guests, via the VCPUOP_initialise hypercall.
However as discussed in
http://lists.xen.org/archives/html/xen-devel/2013-10/msg00912.html this isn't
really a guest visible interface since ARM uses PSCI for VCPU bringup
(VCPUOP_initialise simply isn't available) The other users of this interface
are the domctls, which are not a stable API. Therefore while fixing the ttbcr
size also surround the struct in ifdefs to restrict the struct to the
hypervisor and the tools only (omitting the extra complexity of renaming as I
suggested in the referenced thread).
NB TCR_EL1 on arm64 is known as TTBCR on arm32, hence the apparent naming
inconsistencies.
Spotted-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Cc: Anup Patel <anup.patel@linaro.org>
Cc: patches@linaro.org
Cc: patches@apm.com
mkheader.py doesn't cope with
struct foo { };
so add a newline.
Define unsigned long and long to a non-existent type on ARM so as to catch
their use.
Teach mkheader.py to cope with structs which are ifdef'd. This cannot cope
with #defines between the #ifdef and the struct definitions, so move
MAX_GUEST_CMDLINE to be next to its only usage.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When building the foreign headers on x86_32 we use '#pragma pack(4)' and
therefore need to explicitly align types which should be aligned to 8-byte
boundaries.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
struct cpu_user_regs is currently used as both internal state
(specifically at the base of the stack) and a guest/toolstack
visible API (via struct vcpu_guest_context used by
XEN_DOMCTL_{g,s}etvcpucontext and VCPUOP_initialise).
This causes problems when we want to make the API 64-bit clean since
we don't really want to change the size of the on-stack struct.
So split into vcpu_guest_core_regs which is the API facing struct
and keep cpu_user_regs purely internal, translate between the two.
In the user API arrange for both 64- and 32-bit registers to be
included in a layout which does not differ depending on toolstack
architecture. Also switch to using the more formal banked register
names (e.g. with the _usr suffix) for clarity.
This is an ABI change. Note that the kernel doesn't currently use
this data structure so it affects the tools interface only.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Since Linux's git commit ceb90fa0a8008059ecbbf9114cb89dc71a730bb6,
the privcmd.h interface between Linux and libxc specifies two new
constants, PRIVCMD_MMAPBATCH_MFN_ERROR and
PRIVCMD_MMAPBATCH_PAGED_ERROR. These constants represent the error
codes encoded in the top nibble of an mfn slot passed to the legacy
MMAPBATCH ioctl.
In particular, libxenctrl checks for the equivalent of the latter
constant when dealing with paged out frames that might be the target
of a foreign map.
Previously, the relevant constant was defined in the domctl hypervisor
interface header (XEN_DOMCTL_PFINFO_PAGEDTAB). Because this
top-nibble encoding is a contract between the dom0 kernel and libxc,
a domctl.h definition is misplaced.
- Sync the privcmd.h header to that now available in upstream Linux
- Update libxc appropriately
- Remove the unnecessary constant in domctl.h
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbelL@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Paul Durrant
Oleksandr Andrushchenko
Roger Pau Monné
Andrew Cooper
Ross Lagerwall
Petre Pircalabu
Ian Jackson
Wei Liu
Jan Beulich
Boris Ostrovsky
Stefano Stabellini
Paulina Szubarczyk
Doug Goldstein
Ian Campbell
Olaf Hering
Juergen Gross
Julien Grall
Andres Lagar-Cavilla
Daniel De Graaf