The way the lock is currently being used in get_maptrack_handle(), it
protects only the maptrack limit: The function acts on current's list
only, so races on list accesses are impossible even without the lock.
Otoh list access races are possible between __get_maptrack_handle() and
put_maptrack_handle(), due to the invocation of the former for other
than current from steal_maptrack_handle(). Introduce a per-vCPU lock
for list accesses to become race free again. This lock will be
uncontended except when it becomes necessary to take the steal path,
i.e. in the common case there should be no meaningful performance
impact.
When in get_maptrack_handle adds a stolen entry to a fresh, empty,
freelist, we think that there is probably no concurrency. However,
this is not a fast path and adding the locking there makes the code
clearly correct.
Also, while we are here: the stolen maptrack_entry's tail pointer was
not properly set. Set it.
This is CVE-2017-12136 / XSA-228.
Reported-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
master commit: 02cbeeb620
master date: 2017-08-15 15:07:25 +0200
Introduce new Xen command line parameter called "vwfi", which stands for
virtual wfi. The default is "trap": Xen traps guest wfi and wfe
instructions. In the case of wfi, Xen calls vcpu_block on the guest
vcpu; in the case of guest wfe, Xen calls vcpu_yield on the guest vcpu.
The behavior can be changed by setting vwfi to "native", in that case
Xen doesn't trap neither wfi nor wfe, running them in guest context.
The result is strong reduction in irq latency (from 5000ns to 2000ns,
measured using https://github.com/edgarigl/tbm, the physical timer, and
1 pcpu dedicated to 1 vcpu). The downside is that the scheduler thinks
that the guest is busy when actually is sleeping, leading to suboptimal
scheduling decisions.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
xenstore-paths.markdown talked about ~/device/serial/, but that's not
used.
(It is very wrong for this value, which contains a driver domain
filesystem path, to be in the guest's area of xenstore. However, it
is only ever created by libxl and ready by xenconsoled. When it is
created, it inherits the read-only permissions of /local/domain/DOMID.
So there is no security bug.)
This is a followup to XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We want to stop libxl trustingly reading information from the backend
directory (since this is, of course, writeable by the backend, which
might be a semi-trusted driver domain).
In principle it is wrong in current libxl for anything to try to
divine virtual device configuration from xenstore: the JSON domain
config ought to supply that, and xenstore should only tell us which
devices actually exist.
However:
Firstly, there are several existing places where configuration
information is retrieved from xenstore rather than JSON. We do not
want to reen gineer this in a security patch.
Secondly, we want to make a security patch which can be backported to
versions of libxl without the JSON configuration machinery.
So we take the expedient approach of keeping a copy of the
configuration somewhere we trust, namely /libxl. This is obviously
fairly low-risk, although it does write significantly more keys in
xenstore.
In this patch we make this change in libxl__device_generic_add. This
is responsible for actually writing the vast majority of device
information to xenstore. There are a few loose ends which will be
dealt with in a moment.
Likewise, changes to readers to use the new location will appear in
further patches.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This gives us a record of all the backends we have set up for a
domain, which is separate from the frontends in
/local/domain/$DOMID/device.
In particular:
1. A guest has write permission for the frontend path:
/local/domain/$DOMID/device/$KIND/$DEVID
which means that the guest can completely delete the frontend.
(They can't recreate it because they don't have write permission
on the containing directory.)
2. A guest has write permission for the backend path recorded in the
frontend, ie, it can write to
/local/domain/$DOMID/device/$KIND/$DEVID/backend
which means that the guest can break the association between
frontend and backend.
So we can't rely on iterating over the frontends to find all the
backends, or examining a frontend to discover how a device is
configured.
So, have libxl__device_generic_add record the frontend and backend
paths in /libxl/$DOMID/device, and have libxl__device_destroy remove
them again.
Create the containing directory /libxl/GUEST/device in
libxl__domain_make. The already existing xs_rm in devices_destroy_cb
will take care of removing it.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We've been told by Intel that inconsistent cachability between
multiple mappings of the same page can affect system stability only
when the affected page is an MMIO one. Since the stale data issue is
of no relevance to the hypervisor (since all guest memory accesses go
through proper accessors and validation), handling of RAM pages
remains unchanged here. Any MMIO mapped by domains however needs to be
done consistently (all cachable mappings or all uncachable ones), in
order to avoid Machine Check exceptions. Since converting existing
cachable mappings to uncachable (at the time an uncachable mapping
gets established) would in the PV case require tracking all mappings,
allow MMIO to only get mapped uncachable (UC, UC-, or WC).
This also implies that in the PV case we mustn't use the L1 PTE update
fast path when cachability flags get altered.
Since in the HVM case at least for now we want to continue honoring
pinned cachability attributes for pages not mapped by the hypervisor,
special case handling of r/o MMIO pages (forcing UC) gets added there.
Arguably the counterpart change to p2m-pt.c may not be necessary, since
UC- (which already gets enforced there) is probably strict enough.
Note that the shadow code changes include fixing the write protection
of r/o MMIO ranges: shadow_l1e_remove_flags() and its siblings, other
than l1e_remove_flags() and alike, return the new PTE (and hence
ignoring their return values makes them no-ops).
This is CVE-2016-2270 / XSA-154.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: c61a6f74f8
master date: 2016-02-17 16:16:53 +0100
gnttab_max_frames incorrectly referred to numbers of grant tab
operations and gnttab_max_maptrack_frames was confusingly worded.
Add the default for gnttab_max_frames while here (it's currently the
same on all arches since no arch uses the available arch override) and
adjust the default for gnttab_max_maptrack_frames to match the normal
form.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ef17887d84
master date: 2016-01-19 16:24:44 +0000
Introduce and enforce separate limits for ordinary DomU, DomU with
pass-through device(s), control domain, and hardware domain.
The DomU defaults were determined based on what so far was allowed by
multipage_allocation_permitted().
The x86 hwdom default was chosen based on linux-2.6.18-xen.hg c/s
1102:82782f1361a9 indicating 2Mb is not enough, plus some slack.
The ARM hwdom default was chosen to allow 2Mb (order-9) mappings, plus
a little bit of slack.
This is CVE-2015-8338 / XSA-158.
Reported-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 4a578b316e
master date: 2015-12-08 14:00:33 +0100
Since commit 191b3f3344 ("p2m/ept: enable PML in p2m-ept for
log-dirty"), the A and D bits of EPT paging entries are set
unconditionally, regardless of whether PML is enabled or not. This
causes a regression in Xen 4.6 on some processors due to Intel Errata
AVR41 -- HVM guests get severe memory corruption when the A bit is set
due to incorrect TLB flushing on mov to cr3. The erratum affects the
Atom C2000 family (Avoton).
To fix, do not set the A bit on this processor family.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Move feature suppression to feature detection code. Add command line
override.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
master commit: 33b55dc103
master date: 2015-10-02 13:39:12 +0200
Drop the chapter number as it can be confusing when it gets changed in
the referred document.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ ijc -- dropped hunk changing URL to specific revision, this is not
needed now that the references do not include a specific
chapter number ]
(cherry picked from commit 7f732ffa2b)
When using Linux >= 3.19 (commit 47591df) as dom0 on some Intel Ironlake
devices, It is possible to encounter graphics issues that make screen
unreadable or crash the system. It was reported in freedesktop bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=90037
As we still cannot find a proper fix for this problem, this patch adds
iommu=igfx option to control whether Intel graphics IOMMU is enabled.
Running Xen with iommu=no-igfx is similar to running Linux with
intel_iommu=igfx_off, which disables IOMMU for Intel GPU. This can be
used by users to manually workaround the problem before a fix is
available for i915 driver.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
As implemented here, only supported on platforms with VMX HAP.
By default this functionality is force-disabled, it can be enabled
by specifying altp2m=1 on the Xen command line.
Signed-off-by: Ed White <edmund.h.white@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
In setup_mm(), the value passed as xenheap_megabytes gets
converted to pages and passed to setup_xenheap_mappings(),
which in turn passes it to create_32mb_mappings(), which
contains an ASSERT that the value passed is a multiple of
32MB. So specifying any value that is not an integer multiple
of 32 will cause Xen to hit this assert and fail to boot.
Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Reviewed-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch introduces user configurable parameters to specify RDM
resource and according policies,
Global RDM parameter:
rdm = "strategy=host,policy=strict/relaxed"
Per-device RDM parameter:
pci = [ 'sbdf, rdm_policy=strict/relaxed' ]
Global RDM parameter, "strategy", allows user to specify reserved regions
explicitly, Currently, using 'host' to include all reserved regions reported
on this platform which is good to handle hotplug scenario. In the future
this parameter may be further extended to allow specifying random regions,
e.g. even those belonging to another platform as a preparation for live
migration with passthrough devices. By default this isn't set so we don't
check all rdms. Instead, we just check rdm specific to a given device if
you're assigning this kind of device. Note this option is not recommended
unless you can make sure any conflict does exist.
'strict/relaxed' policy decides how to handle conflict when reserving RDM
regions in pfn space. If conflict exists, 'strict' means an immediate error
so VM can't keep running, while 'relaxed' allows moving forward with a
warning message thrown out.
Default per-device RDM policy is same as default global RDM policy as being
'relaxed'. And the per-device policy would override the global policy like
others.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Checked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Usage:
hdtype=ide|ahci (default=ide)
If hdtype=ahci adds ich9 disk controller in ahci mode and uses it with
upstream qemu to emulate disks instead of ide.
It doesn't support cdroms which still using ide (cdroms will use
"-device ide-cd" as new qemu parameter)
Ahci requires new qemu parameter but for now other emulated disks cases
remains with old ones (I did it in other patch, not needed by this one)
I did it as libxl parameter disabled by default to avoid possible
problems:
- with save/restore/migration (restoring with ahci a domU that was with
ide instead)
- windows < 8 without pv drivers (a registry key change is needed for
AHCI<->IDE change FWIK to avoid possible blue screen)
- windows XP or older that many not support ahci by default.
Setting AHCI with libxl parameter and default to disabled seems the best
solution.
AHCI increase hvm domUs boot performance. On linux hvm domU I saw up to
only 20% of the previous total boot time, whereas boot time decrease a
lot on W7 domUs for most of boots I have done. Small difference in boot
time compared to ide mode on W8 and newer (probably other xen
improvements or fixes are needed not ahci related)
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- adjust name of LIBXL_HAVE #define as discussed on list,
fixup pod syntax in xl.cfg.pod.5 ]
Add document to introduce basic concepts and terms in PSR family
technologies and the xl interfaces.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Detect Intel Cache Allocation Technology(CAT) feature and store the
cpuid information for later use. Currently only L3 cache allocation is
supported. The L3 CAT features may vary among sockets so per-socket
feature information is stored. The initialization can happen either at
boot time or when CPU(s) is hot plugged after booting.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Use -1 as notifier priority. Fix typos.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
In combination with the per-active entry locks, the grant table lock
can be made a read-write lock since the majority of cases only the
read lock is required. The grant table read lock protects against
changes to the table version or size (which are done with the write
lock held).
The write lock is also required when two active entries must be
acquired.
The double lock is still required when updating IOMMU page tables.
With the lock contention being only on the maptrack lock (unless IOMMU
updates are required), performance and scalability is improved.
Based on a patch originally by Matt Wilson <msw@amazon.com>.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Split grant table lock into two separate locks. One to protect
maptrack free list (maptrack_lock) and one for everything else (lock).
Based on a patch originally by Matt Wilson <msw@amazon.com>.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduce a per-active entry spin lock to protect active entry state
The grant table lock must be locked before acquiring (locking) an
active entry.
This is a step in reducing contention on the grant table lock, but
will only do so once the grant table lock is turned into a read-write
lock.
Based on a patch originally by Matt Wilson <msw@amazon.com>.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
For example on Dell machines we see:
(XEN) 00000fed18000-00000fed19fff type=11 attr=8000000000000000
(XEN) Unknown cachability for MFNs 0xfed18-0xfed19
Let's allow them to be mapped as UC.
We also alter the 'efi-rs' to be 'efi=rs' or 'efi=no-rs'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add default security contexts to the XSM policy for use by the toolstack
when a domain is created without specifying an explicit security label.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Note that the example is done on Midway whose SMMU driver is not
supported on Xen upstream.
Currently, I don't have other platform where I can test Device Tree
passthrough.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A top level EPT parameter "ept=<options>" and a sub boolean "opt_pml_enabled"
are added to control PML. Other booleans can be further added for any other EPT
related features.
The document description for the new parameter is also added.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Kevin Tian <kevin.tian@intel.com>
In this patch we mechanically rename mem_event to vm_event. This patch
introduces no logic changes to the code. Using the name vm_event better
describes the intended use of this subsystem, which is not limited to memory
events. It can be used for off-loading the decision making logic into helper
applications when encountering various events during a VM's execution.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When a device is marked for passthrough (via the new property
"xen,passthrough"), dom0 must not access to the device (i.e not
loading a driver), but should be able to manage the MMIO/interrupt
of the passthrough device.
The latter part will allow the toolstack to map MMIO/IRQ when a device
is pass through to a guest.
The property "xen,passthrough" will be translated as 'status="disabled"'
in the device tree to avoid DOM0 using the device. We assume that DOM0 is
able to cope with this property (already the case for Linux, and
required by ePAPR).
Rework the function map_device (renamed into handle_device) to:
* For a given device node:
- Give permission to manage IRQ/MMIO for this device
- Retrieve the IRQ configuration (i.e edge/level) from the device
tree
* When the device is not marked for guest passthrough:
- Assign the device to the guest if it's protected by an IOMMU
- Map the IRQs and MMIOs regions to the guest
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 2090f14c5c ("sysctl: make XEN_SYSCTL_topologyinfo sysctl a
little more efficient") renamed XEN_SYSCTL_topologyinfo to
XEN_SYSCTL_cputopoinfo.
It, however, neglected to update this macro for flask-related files.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This allows for early-printk to be specified (for existing UARTS at
least) without the need to edit Rules.mk.
The existing shortcuts are retained, but in a much more compact
fashion.
An unused EARLY_PRINTK_BAUD was removed from the zynqmq settings.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
The definitions of static device labels must be placed at the end of the
policy.conf before passing it to checkpolicy; the existing examples
(which are commented out) are in the wrong location. Create a new file
for device contexts which will place them in the proper location.
This also removes some directions about using the xen policy type in
checkpolicy which is no longer needed.
Reported-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The way this method works allows for honoring "warm" reboot requested
by the user and additionally has a way to power-cycle the machine.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
By default we will always use EFI reboot mechanism when
running under EFI platforms. However some EFI platforms
are buggy and need to use the ACPI mechanism to
reboot (such as Lenovo ThinkCentre M57). As such
respect the 'reboot=' override and DMI overrides
for EFI platforms.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- BOOT_INVALID is just zero
- also consider acpi_disabled in BOOT_INVALID resolution
- duplicate BOOT_INVALID resolution in machine_restart()
- don't fall back from BOOT_ACPI to BOOT_EFI (if it was overridden, it
surely was for a reason)
- adjust doc change formatting
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This unifies the flask_enforcing and flask_enabled boot parameters into
a single parameter with additional states. Defined options are:
enforcing - require policy to be loaded at boot time and enforce it
permissive - a missing or broken policy does not panic
disabled - revert to dummy (no XSM) policy. Was flask_enabled=0
late - bootloader policy is not used; later loadpolicy is enforcing
The default mode remains "permissive" and the flask_enforcing boot
parameter is retained for compatibility. If flask_enforcing=1 is
specified and flask= is not, the bootloader policy will be loaded in
enforcing mode if present, but errors will disable access controls until
a successful loadpolicy instead of causing a panic at boot.
Suggested-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... by introducing a "dom0_nodes" option augmenting the "dom0_mem" and
"dom0_max_vcpus" ones.
Note that this gives meaning to MEMF_exact_node specified alone (i.e.
implicitly combined with NUMA_NO_NODE): In such a case any node inside
the domain's node mask is acceptable, but no other node. This changed
behavior is (implicitly) being exposed through the memop hypercalls.
Note further that this change doesn't take care of moving the initrd
image into memory matching Dom0's affinity when the initrd doesn't get
copied (because of being part of the initial mapping) anyway.
And note finally that this doesn't get us meaningfully closer to
handing vNUMA information to Dom0 (which will require the current
striping of allocations to become node-specific in order for the passed
on information to be meaningful).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@cirix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... and make it tunable via the command line.
1/8 of RAM is 128M on a 1GB system and 256M on a 2GB system etc,
which is a lot. 1/32 of RAM seems more reasonable. Also drop the
minimum to 32M.
Leave the maximum at 1GB.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jan Beulich <JBeulich@suse.com>
NMI watchdog sets APIC_LVTPC register to generate an NMI when PMU counter
overflow occurs. This may be overwritten by VPMU code later, effectively
turning off the watchdog.
We should disable VPMU when NMI watchdog is running.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Prevent Dom0 from accessing HPET MMIO region by adding the HPET mfn to the
list of forbiden memory regions (if ACPI_HPET_PAGE_PROTECT4 or
ACPI_HPET_PAGE_PROTECT64 flag is set) or to the list of read-only regions.
Also provide an option that prevents adding the HPET to the read-only memory
regions called ro-hpet, in case there are systems that put other stuff in
the HPET page.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Don't loop over iomem_deny_access() for consecutive MFNs.
Put new command line option's doc entry in right spot.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
',' is a valid character in a device-tree path (see ePAPR v1.1 Table
2-1), in fact ',' is actually pretty common in node names.
Using ',' as a separator breaks for example on fast models. If you use
the full path (/smb/motherboard/iofpga@3,00000000/uart@090000) rather
than the alias then earlyprintk gives:
(XEN) Looking for UART console /smb/motherboard/iofpga@3
(XEN) Unable to find device "/smb/motherboard/iofpga@3"
(XEN) Bad console= option 'dtuart'
I actually noticed this on Jetson where the uart is
"/serial@0,70006300" and there happened to be no alias defined.
Instead use ':' as the separator, it is defined to terminate the path
in the context of /chosen/stdout-path (Table 3-4) which is pretty
closely analogous to the dtuart= option and so makes a pretty good
choice (especially since the next patch adds support for stdout-path).
Since no DT aware driver current supports any options there is no
point in retaining support for ',' for backwards compatibility.
Additionally, expand the buffer for the dtuart option, a path can be
far longer than 30 characters (in fact the maximum size of a single
node name is 31, so it's not even necessarily enough for an alias).
128 is completely arbitrary and allows for paths at least 8 deep even
with worst case node names.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Jan Beulich
Stefano Stabellini
Ian Jackson
Ian Campbell
Ross Lagerwall
Chao Peng
Andrew Cooper
Ting-Wei Lan
Ed White
Chris (Christopher) Brand
Tiejun Chen
Fabio Fantoni
Dario Faggioli
David Vrabel
Konrad Rzeszutek Wilk
Daniel De Graaf
Wei Liu
Julien Grall
Kai Huang
Tamas K Lengyel
Boris Ostrovsky
Edgar E. Iglesias
Vijaya Kumar K
Oleksandr Tyshchenko
Quan Xu
Roger Pau Monné